Re: [hylafax-users] [hylafax-devel] RE : Multiple modems

[Jeff Herring <jeffh@xxxxxxxxx>]

Comment regarding inittab entry.

From the man page:

       id     is a unique sequence of 1-4 characters which identifies an entry
              in inittab (for versions of sysvinit compiled with the old libc5
              (< 5.2.18) or a.out libraries the limit is 2 characters).

              Note:  traditionally,  for  getty and other login processes, the
              value of the id field is kept the same as the suffix of the cor-
              responding  tty,  e.g. 1 for tty1. Some ancient login accounting
              programs might expect this, though I can't think of any.

-Jeff H.


At 03:45 AM 8/24/2004, Sipho Mothobi wrote:




> I have run it, here is the trace. I have also added this to me innitab
>
>  ---- LOG TRACE OF FAXADDMODEM -------
> [root@smo2 root]# faxaddmodem
> Serial port that modem is connected to []? ttySL1
>
> Ok, time to setup a configuration file for the modem.  The manual
> page config(5F) may be useful during this process.  Also be aware
> that at any time you can safely interrupt this procedure.
>
> Reading scheduler config file /var/spool/hylafax/etc/config.
>
> Hey, there is an existing config file
> /var/spool/hylafax/etc/config.ttySL1...
>
> The non-default server configuration parameters are:
>
> CountryCode:            27
> AreaCode:               011
> FAXNumber:              +27.011.282.8980
> LongDistancePrefix:     0
> InternationalPrefix:    09
> DialStringRules:        etc/dialrules
> SessionTracing:         11
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "NothingSetup"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
>
> Are these ok [yes]? no
> Country code [27]?
> Area code [011]? 11
> Phone number of fax modem [+27.011.282.8980]? +27.011.282.8979
> Local identification string (for TSI/CIG) ["NothingSetup"]?
> Long distance dialing prefix [0]? 0
> International dialing prefix [09]?
> Dial string rules file (relative to /var/spool/hylafax) [etc/dialrules]?
> Tracing during normal server operation [1]?
> Tracing during send and receive sessions [11]?
> Protection mode for received facsimile [0600]?
> Protection mode for session logs [0600]?
> Protection mode for ttySL1 [0600]?
> Rings to wait before answering [1]? 0
> Modem speaker volume [off]?
> Command line arguments to getty program ["-h %l dx_%s"]?
> Pathname of TSI access control list file (relative to /var/spool/hylafax)
> [""]?
> Pathname of Caller-ID access control list file (relative to
> /var/spool/hylafax) [""]?
> Tag line font file (relative to /var/spool/hylafax) [etc/lutRS18.pcf]?
> Tag line format string ["From %%l|%c|Page %%P of %%T"]?
> Time before purging a stale UUCP lock file (secs) [30]?
> Hold UUCP lockfile during inbound data calls [Yes]?
> Hold UUCP lockfile during inbound voice calls [Yes]?
> Percent good lines to accept during copy quality checking [95]?
> Max consecutive bad lines to accept during copy quality checking [5]?
> Max number of pages to accept in a received facsimile [25]?
> Syslog facility name for ServerTracing messages [daemon]?
> Set UID to 0 to manipulate CLOCAL [""]?
> Use available priority job scheduling mechanism [""]?
>
> Your facsimile phone number (+27.011.282.8979) does not agree with your
> country code (27) or area code (11).  The number
> should be a fully qualified international dialing number of the form:
>
>     +27 11 <local phone number>
>
> Spaces, hyphens, and periods can be included for legibility.  For example,
>
>     +27.11.555.1212
>
> is a possible phone number (using your country and area codes).
>
> The non-default server configuration parameters are:
>
> CountryCode:            27
> AreaCode:               11
> FAXNumber:              +27.011.282.8979
> LongDistancePrefix:     0
> InternationalPrefix:    09
> DialStringRules:        etc/dialrules
> SessionTracing:         11
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "NothingSetup"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:           25
>
> Are these ok [yes]? yes
>
> Now we are going to probe the tty port to figure out the type
> of modem that is attached.  This takes a few seconds, so be patient.
> Note that if you do not have the modem cabled to the port, or the
> modem is turned off, this may hang (just go and cable up the modem
> or turn it on, or whatever).
>
> Probing for best speed to talk to modem: 38400
>  OK.
>
> Hmm, this looks like a Class 1 modem.
> Product code (ATI0) is "SmartLink Soft Modem".
> Other information (ATI3) is "/dev/slusb1".
> DTE-DCE flow control scheme [default]? Modem manufacturer is "Unknown".
> Modem model is "Unknown".
>
> Using prototype configuration file class1...
>
> There is no prototype configuration file for your modem, so we will
> have to fill in the appropriate parameters by hand.  You will need the
> manual for how to program your modem to do this task.  In case you are
> uncertain of the meaning of a configuration parameter you should
> consult the config(5F) manual page for an explanation.
>
> Note that modem commands must be specified exactly as they are to be
> sent to the modem.  Note also that quote marks (") will not be displayed
> and will automatically be deleted.  You can use this facility to supply
> null parameters as "".
>
> Finally, beware that the set of parameters is long.  If you prefer to
> use your favorite editor instead of this script you should fill things
> in here as best you can and then edit the configuration file
>
> "/var/spool/hylafax/etc/config.ttySL1"
>
> after completing this procedure.
>
> Command to enter Class 1 [AT+FCLASS=1]?
> Command to stop and wait prior to sending PPM [AT+FTS=7]?
> Command to stop and wait prior to sending TCF [AT+FTS=7]?
> Command to stop and wait prior to sending EOP [AT+FTS=9]?
> Extra bytes in a received HDLC frame [4]?
> Command to avoid +FCERROR before image data [""]?
> Maximum time to wait for OK after aborting a receive (ms) [200]?
> Maximum wait for initial identification frame (ms) [40000]?
> Delay after completing training (ms) [75]?
> Command to ensure silence after receiving HDLC and before sending
> [AT+FRS=7]?
> Delay before sending DCS and TCF (ms) [75]?
> Delay after failed training (ms) [1500]?
>
> The modem configuration parameters are:
>
> Class1Cmd:              AT+FCLASS=1
> Class1PPMWaitCmd:       AT+FTS=7
> Class1TCFWaitCmd:       AT+FTS=7
> Class1EOPWaitCmd:       AT+FTS=9
> Class1FrameOverhead:    4
> Class1MsgRecvHackCmd:   ""
> Class1RecvAbortOK:      200
> Class1RecvIdentTimer:   40000
> Class1SendMsgDelay:     75
> Class1SwitchingCmd:     AT+FRS=7
> Class1TCFMaxNonZero:    10
> Class1TCFMinRun:        1000
> Class1TCFResponseDelay: 75
> Class1TrainingRecovery: 1500
>
> Are these ok [yes]? yes
>
> Creating new configuration file /var/spool/hylafax/etc/config.ttySL1...
> ...saving current file as /var/spool/hylafax/etc/config.ttySL1.sav.
> Done setting up the modem configuration.
>
> Checking /var/spool/hylafax/etc/config for consistency...
> ...some parameters are different.
>
> The non-default scheduler parameters are:
>
> CountryCode:            27
> AreaCode:               11
> LongDistancePrefix:     0
> InternationalPrefix:    09
> DialStringRules:        etc/dialrules
> TimeOfDay:              any
>
> Are these ok [yes]? yes
>
> Creating new configuration file /var/spool/hylafax/etc/config...
> ...saving current file as /var/spool/hylafax/etc/config.sav.
>
> Don't forget to run faxmodem(8C) (if you have a send-only environment)
> or configure init to run faxgetty on ttySL1.
>
>
> ------- innittab ----
>
> .
> .
> .
> # Modem configuration
> mo:2345:respawn:/usr/sbin/faxgetty ttySL0
> mo:2345:respawn:/usr/sbin/faxgetty ttySL1
> .
> .
>
>
>
> ____________________ HylaFAX(tm) Developers Mailing List ____________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-devel-request@xxxxxxxxxxx < /dev/null

--------------------------------------
Jeff Herring  /  jeffh@xxxxxxxxx
--------------------------------------  


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*