HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] High Error rates
Damn! I sent the wrong transaction file. Here is the correct one:
This transmission created a two page fax; the first page is fine but the
second is just a bunch of black band in the top one and one-half inch of the
page.
Jul 29 06:59:05.19: [25453]: SESSION BEGIN 00003555 18007364795
Jul 29 06:59:05.19: [25453]: HylaFAX (tm) Version 4.1.8
Jul 29 06:59:05.19: [25453]: <-- [4:ATA\r]
Jul 29 06:59:10.55: [25453]: --> [7:CONNECT]
Jul 29 06:59:10.55: [25453]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS4'
Jul 29 06:59:10.55: [25453]: RECV FAX: begin
Jul 29 06:59:10.55: [25453]: <-- data [23]
Jul 29 06:59:10.55: [25453]: <-- data [2]
Jul 29 06:59:12.19: [25453]: --> [7:CONNECT]
Jul 29 06:59:12.19: [25453]: <-- data [10]
Jul 29 06:59:12.19: [25453]: <-- data [2]
Jul 29 06:59:13.01: [25453]: --> [2:OK]
Jul 29 06:59:13.01: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 06:59:16.11: [25453]: --> [0:]
Jul 29 06:59:16.11: [25453]: MODEM <Empty line>
Jul 29 06:59:16.11: [25453]: <-- data [1]
Jul 29 06:59:16.12: [25453]: --> [2:OK]
Jul 29 06:59:16.12: [25453]: DELAY 1500 ms
Jul 29 06:59:17.62: [25453]: <-- [9:AT+FTH=3\r]
Jul 29 06:59:17.73: [25453]: --> [7:CONNECT]
Jul 29 06:59:17.73: [25453]: <-- data [23]
Jul 29 06:59:17.73: [25453]: <-- data [2]
Jul 29 06:59:19.47: [25453]: --> [7:CONNECT]
Jul 29 06:59:19.47: [25453]: <-- data [10]
Jul 29 06:59:19.47: [25453]: <-- data [2]
Jul 29 06:59:20.29: [25453]: --> [2:OK]
Jul 29 06:59:20.29: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 06:59:21.93: [25453]: --> [7:CONNECT]
Jul 29 06:59:22.59: [25453]: --> [2:OK]
Jul 29 06:59:22.59: [25453]: REMOTE TSI "304 472 0546"
Jul 29 06:59:22.59: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 06:59:22.64: [25453]: --> [7:CONNECT]
Jul 29 06:59:22.92: [25453]: --> [2:OK]
Jul 29 06:59:22.92: [25453]: REMOTE wants 14400 bit/s
Jul 29 06:59:22.92: [25453]: REMOTE wants page width 1728 pixels in 215 mm
Jul 29 06:59:22.92: [25453]: REMOTE wants unlimited page length
Jul 29 06:59:22.92: [25453]: REMOTE wants 3.85 line/mm
Jul 29 06:59:22.92: [25453]: REMOTE wants 2-D MR
Jul 29 06:59:22.92: [25453]: RECV training at v.17 14400 bit/s
Jul 29 06:59:22.92: [25453]: <-- [11:AT+FRM=145\r]
Jul 29 06:59:24.64: [25453]: --> [7:CONNECT]
Jul 29 06:59:26.25: [25453]: RECV: TCF 2916 bytes, 4% non-zero, 2787 zero-run
Jul 29 06:59:26.27: [25453]: --> [10:NO CARRIER]
Jul 29 06:59:26.27: [25453]: DELAY 75 ms
Jul 29 06:59:26.35: [25453]: TRAINING succeeded
Jul 29 06:59:26.35: [25453]: <-- [9:AT+FTH=3\r]
Jul 29 06:59:26.47: [25453]: --> [7:CONNECT]
Jul 29 06:59:26.47: [25453]: <-- data [3]
Jul 29 06:59:26.47: [25453]: <-- data [2]
Jul 29 06:59:27.69: [25453]: --> [2:OK]
Jul 29 06:59:27.69: [25453]: <-- [11:AT+FRM=146\r]
Jul 29 06:59:28.68: [25453]: --> [7:CONNECT]
Jul 29 06:59:28.68: [25453]: RECV: begin page
Jul 29 06:59:52.40: [25453]: RECV: 1080 total lines, 0 bad lines, 0
consecutive bad lines
Jul 29 06:59:52.40: [25453]: RECV: end page
Jul 29 06:59:52.40: [25453]: --> [10:NO CARRIER]
Jul 29 06:59:52.40: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 06:59:53.34: [25453]: --> [7:CONNECT]
Jul 29 06:59:53.47: [25453]: --> [2:OK]
Jul 29 06:59:53.47: [25453]: RECV recv MPS (more pages, same document)
Jul 29 06:59:53.47: [25453]: <-- [9:AT+FRS=7\r]
Jul 29 06:59:53.59: [25453]: --> [2:OK]
Jul 29 06:59:53.59: [25453]: <-- [9:AT+FTH=3\r]
Jul 29 06:59:53.71: [25453]: --> [7:CONNECT]
Jul 29 06:59:53.71: [25453]: RECV send MCF (message confirmation)
Jul 29 06:59:53.71: [25453]: RECV FAX (00003555): from 304 472 0546, page 1 in
0:27, INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Jul 29 06:59:53.71: [25453]: <-- data [3]
Jul 29 06:59:53.71: [25453]: <-- data [2]
Jul 29 06:59:54.92: [25453]: --> [2:OK]
Jul 29 06:59:54.92: [25453]: <-- [11:AT+FRM=146\r]
Jul 29 06:59:56.08: [25453]: --> [7:CONNECT]
Jul 29 06:59:56.08: [25453]: RECV: begin page
Jul 29 07:00:24.90: [25453]: RECV: 126 total lines, 93 bad lines, 20
consecutive bad lines
Jul 29 07:00:24.90: [25453]: RECV: REJECT page quality, 26% good lines (95%
required)
Jul 29 07:00:24.90: [25453]: RECV: end page
Jul 29 07:00:24.90: [25453]: --> [10:NO CARRIER]
Jul 29 07:00:24.90: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 07:00:29.06: [25453]: --> [7:CONNECT]
Jul 29 07:00:29.20: [25453]: --> [2:OK]
Jul 29 07:00:29.20: [25453]: RECV recv MPS (more pages, same document)
Jul 29 07:00:29.20: [25453]: <-- [9:AT+FRS=7\r]
Jul 29 07:00:29.32: [25453]: --> [2:OK]
Jul 29 07:00:29.32: [25453]: <-- [9:AT+FTH=3\r]
Jul 29 07:00:29.45: [25453]: --> [7:CONNECT]
Jul 29 07:00:29.45: [25453]: <-- data [3]
Jul 29 07:00:29.45: [25453]: <-- data [2]
Jul 29 07:00:30.66: [25453]: --> [2:OK]
Jul 29 07:00:30.66: [25453]: RECV send RTN (retrain negative)
Jul 29 07:00:30.66: [25453]: <-- [9:AT+FRH=3\r]
Jul 29 07:00:31.86: [25453]: --> [7:CONNECT]
Jul 29 07:00:31.99: [25453]: --> [2:OK]
Jul 29 07:00:31.99: [25453]: RECV recv DCN
Jul 29 07:00:31.99: [25453]: RECV FAX (00003555): recvq/fax03437.tif from 304
472 0546, route to <unspecified>, 1 pages in 1:21
Jul 29 07:00:31.99: [25453]: RECV FAX: COMREC received DCN
Jul 29 07:00:31.99: [25453]: <-- [9:AT+FTH=3\r]
Jul 29 07:00:32.11: [25453]: --> [7:CONNECT]
Jul 29 07:00:32.11: [25453]: <-- data [3]
Jul 29 07:00:32.11: [25453]: <-- data [2]
Jul 29 07:00:33.32: [25453]: --> [2:OK]
Jul 29 07:00:33.32: [25453]: RECV FAX (00003555): session with 304 472 0546
terminated abnormally: COMREC received DCN
Jul 29 07:00:33.32: [25453]: RECV FAX: bin/faxrcvd "recvq/fax03437.tif"
"ttyS4" "00003555" "COMREC received DCN" "" ""
Jul 29 07:00:33.43: [25453]: RECV FAX: end
Jul 29 07:00:33.43: [25453]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*