 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Fw: Re: Upgrade of Debian hylafax breaks server.
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Fw: Re: Upgrade of Debian hylafax breaks server.
- From: Hugh Esco <hesco@xxxxxxxxxx>
- Cc: Giuseppe Sacco <eppesuig@xxxxxxxxxx>
- Reply-to: hesco@xxxxxxxxxx
- Date: Wed, 23 Jun 2004 22:06:19 -0400
Not sure what changed here. But the server lost power during a storm this evening and when it came back up, faxstat was giving me the following results: hesco@biko:~$ faxstat HylaFAX scheduler on biko.office.gpga: Running Modem ttyS0 (+1.404.806.0584): Running and idle Modem ttyS1 (+1.404.806.0584): Running and idle hesco@biko:~$ ./fax.sh request id is 928 (group id 928) for host localhost (1 file) request id is 929 (group id 929) for host localhost (1 file) hesco@biko:~$ faxstat -s HylaFAX scheduler on biko.office.gpga: Running Modem ttyS0 (+1.404.806.0584): Sending job 928 Modem ttyS1 (+1.404.806.0584): Running and idle JID Pri S Owner Number Pages Dials TTS Status 928 127 R hesco 1-912-265-7008 0:4 0:12 929 127 B hesco 1-912-265-7008 0:0 0:12 Blocked by concurrent job I have no idea why /etc/init.d/hylafax restart didn't handle the issue, but apparently I'm back up and running now, I guess. Thanks. -- Hugh Begin forwarded message: Date: Wed, 23 Jun 2004 14:44:36 -0400 From: Hugh Esco <hesco@xxxxxxxxxx> To: hylafax-users@xxxxxxxxxxx Cc: Giuseppe Sacco <eppesuig@xxxxxxxxxx> Subject: Re: [hylafax-users] Upgrade of Debian hylafax breaks server. Giuseppe Sacco: Attached please find the syslog and directory listing you request below. Thanks for your help with this issue and for your work maintaining this package in the Debian installation. It is much appreciated. -- Hugh Esco On Tue, 22 Jun 2004 19:20:00 +0200 Giuseppe Sacco <eppesuig@xxxxxxxxxx> wrote: > Il Tue, Jun 22, 2004 at 12:08:28PM -0400, Hugh Esco ha scritto: > > Yesterday I performed an apt-get upgrade on this Debian (testing) > > server, which brought in a new version of hylafax-server, -common > > and-client. Now I am getting the below errors when attempting to > > submit a job. Below the error messages are the server's response to > > faxstat and to the init restart I did immediately before running > > this failed job. I would appreciate any clues anyone can offer as > > to why this is bombing out and what I can do about it short of > > removing and re-installing from scratch. > > Hi, > from your report it seems that the server doesn't start, while > faxgetty is correctly workimg. > > This is most probably due to some fundamental changes in the package > structure I did in order to completely put hylafax in a chroot > environment. > > I would like to have a look at the /var/log/syslog lines added by > hylafax when you run '/etc/init.d/hylafax restart' and I would like > to have the output of 'ls -la /var/spool/hylafax'. > > Could you please provide this information? > > Thanks, > Giuseppe > > ____________________ HylaFAX(tm) Users Mailing List > _______________________ > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < > /dev/null > *To learn about commercial HylaFAX(tm) support, mail > sales@xxxxxxxxx* > -- +--------------------------------------------- | Hugh Esco, <hesco@xxxxxxxxxx> 404-806-0480 | Political Coordinator, Georgia Green Party | Post Office Box 5332; Atlanta GA 31107 | http://www.greens.org/georgia/ +--------------------------------------------- -- +--------------------------------------------- | Hugh Esco, <hesco@xxxxxxxxxx> 404-806-0480 | Political Coordinator, Georgia Green Party | Post Office Box 5332; Atlanta GA 31107 | http://www.greens.org/georgia/ +---------------------------------------------
hesco@biko:~$ ls -al /var/spool/hylafax total 104 drwxr-xr-x 16 uucp uucp 4096 Jun 22 11:52 . drwxr-xr-x 11 root root 4096 May 25 16:10 .. prw------- 1 uucp uucp 0 Jun 23 14:37 FIFO prw------- 1 uucp uucp 0 Jun 23 14:37 FIFO.ttyS0 prw------- 1 uucp uucp 0 Jun 23 14:37 FIFO.ttyS1 drwxr-xr-x 2 uucp uucp 4096 Jan 31 08:14 archive lrwxrwxrwx 1 root root 7 Jun 22 11:52 bin -> etc/bin drwxr-xr-x 2 uucp uucp 4096 Jun 22 17:49 client drwxr-xr-x 2 uucp uucp 4096 Jun 21 21:08 config drwxr-xr-x 2 uucp uucp 4096 Jun 21 21:08 dev drwxr-xr-x 2 uucp uucp 8192 Jun 22 11:55 docq drwxr-xr-x 2 uucp uucp 12288 Jun 23 14:37 doneq drwxr-xr-x 3 root root 4096 Jun 22 11:52 etc drwxr-xr-x 2 uucp uucp 4096 Jun 20 11:06 info drwxr-xr-x 2 uucp uucp 32768 Jun 20 11:26 log drwxr-xr-x 2 uucp uucp 4096 Jan 31 08:14 pollq drwxr-xr-x 2 uucp uucp 4096 Jun 21 10:53 recvq drwxr-xr-x 2 uucp uucp 4096 Jun 23 14:37 sendq drwxr-xr-x 2 uucp uucp 4096 Jun 20 06:47 status drwsrwxrwx 2 uucp uucp 4096 Jun 22 11:55 tmp hesco@biko:~$ biko:~# tail -f /var/log/syslog Jun 23 14:37:08 biko FaxQueuer[2536]: HylaFAX (tm) Version 4.1.8 Jun 23 14:37:08 biko FaxQueuer[2536]: Copyright (c) 1990-1996 Sam Leffler Jun 23 14:37:08 biko FaxQueuer[2536]: Copyright (c) 1991-1996 Silicon Graphics, Inc. Jun 23 14:37:08 biko FaxQueuer[2536]: NOTIFY: bin/notify "doneq/q924" "timedout" "" Jun 23 14:37:08 biko FaxQueuer[2536]: NOTIFY: bin/notify "doneq/q925" "timedout" "" Jun 23 14:37:09 biko FaxQueuer[2536]: NOTIFY: bin/notify "doneq/q926" "timedout" "" Jun 23 14:37:09 biko HylaFAX[2560]: HylaFAX INET: bind (port 4559): Address already in use Jun 23 14:37:09 biko HylaFAX[2560]: HylaFAX INET: Unable to init server, trying again in 5 seconds.Jun 23 14:37:09 biko HylaFAX[2560]: HylaFAX SNPP: bind (port 444): Address already in use Jun 23 14:37:09 biko HylaFAX[2560]: HylaFAX SNPP: Unable to init server, trying again in 5 seconds.Jun 23 14:37:09 biko FaxGetty[9401]: CAUGHT SIGNAL 15 Jun 23 14:37:09 biko FaxGetty[9401]: CLOSE /dev/ttyS1 Jun 23 14:37:09 biko FaxGetty[9400]: CAUGHT SIGNAL 15 Jun 23 14:37:09 biko FaxGetty[9400]: CLOSE /dev/ttyS0 Jun 23 14:37:10 biko FaxGetty[2563]: Unknown speaker volume "on"; using "quiet" Jun 23 14:37:10 biko FaxGetty[2563]: OPEN /dev/ttyS0 HylaFAX (tm) Version 4.1.8 Jun 23 14:37:10 biko FaxGetty[2565]: OPEN /dev/ttyS1 HylaFAX (tm) Version 4.1.8 Jun 23 14:37:10 biko FaxQueuer[2536]: NOTIFY: bin/notify "doneq/q927" "timedout" "" Jun 23 14:37:10 biko FaxQueuer[2536]: MODEM ttyS1: DOWN Jun 23 14:37:10 biko FaxQueuer[2536]: MODEM ttyS0: DOWN Jun 23 14:37:10 biko FaxQueuer[2536]: MODEM ttyS0: NUMBER +1.404.806.0584 Jun 23 14:37:10 biko FaxQueuer[2536]: MODEM ttyS1: NUMBER +1.404.806.0584 Jun 23 14:37:14 biko HylaFAX[2560]: HylaFAX INET: bind (port 4559): Address already in use Jun 23 14:37:14 biko HylaFAX[2560]: HylaFAX INET: Unable to init server, trying again in 10 seconds. Jun 23 14:37:14 biko HylaFAX[2560]: HylaFAX SNPP: bind (port 444): Address already in use Jun 23 14:37:14 biko HylaFAX[2560]: HylaFAX SNPP: Unable to init server, trying again in 10 seconds. Jun 23 14:37:24 biko FaxGetty[2563]: MODEM MULTI-TECH SYSTEMS MT2834ZDX/0317I Jun 23 14:37:24 biko HylaFAX[2560]: HylaFAX INET: bind (port 4559): Address already in use Jun 23 14:37:24 biko HylaFAX[2560]: HylaFAX INET: Unable to init server, trying again in 15 seconds. Jun 23 14:37:24 biko HylaFAX[2560]: HylaFAX SNPP: bind (port 444): Address already in use Jun 23 14:37:24 biko HylaFAX[2560]: HylaFAX SNPP: Unable to init server, trying again in 15 seconds. Jun 23 14:37:24 biko FaxGetty[2565]: MODEM MULTI-TECH SYSTEMS MT2834ZDX/0317I Jun 23 14:37:25 biko FaxGetty[2563]: STATE CHANGE: BASE -> RUNNING (timeout 30) Jun 23 14:37:25 biko FaxGetty[2563]: HELLO Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS0: READY, capabilities Pd5ffc703:ff Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS0: NUMBER +1.404.806.0584 Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS0: READY, capabilities Pd5ffc703:ff Jun 23 14:37:25 biko FaxGetty[2565]: STATE CHANGE: BASE -> RUNNING (timeout 30) Jun 23 14:37:25 biko FaxGetty[2565]: HELLO Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS1: READY, capabilities Pd5ffc703:ff Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS1: NUMBER +1.404.806.0584 Jun 23 14:37:25 biko FaxQueuer[2536]: MODEM ttyS1: READY, capabilities Pd5ffc703:ff Jun 23 14:37:39 biko HylaFAX[2560]: HylaFAX INET: bind (port 4559): Address already in use Jun 23 14:37:39 biko HylaFAX[2560]: HylaFAX INET: Unable to init server, trying again in 20 seconds. Jun 23 14:37:39 biko HylaFAX[2560]: HylaFAX SNPP: bind (port 444): Address already in use Jun 23 14:37:39 biko HylaFAX[2560]: HylaFAX SNPP: Unable to init server, trying again in 20 seconds. Jun 23 14:37:59 biko HylaFAX[2560]: HylaFAX INET: bind (port 4559): Address already in use Jun 23 14:37:59 biko HylaFAX[2560]: HylaFAX INET: Unable to init server, trying again in 25 seconds. Jun 23 14:37:59 biko HylaFAX[2560]: HylaFAX SNPP: bind (port 444): Address already in use Jun 23 14:37:59 biko HylaFAX[2560]: HylaFAX SNPP: Unable to init server, trying again in 25 seconds. Jun 23 14:38:01 biko /USR/SBIN/CRON[2584]: (mail) CMD ( if [ -x /usr/lib/exim/exim3 -a -f /etc/exim/exim.conf ]; then /usr/lib/exim/exim3 -q ; fi)
- Prev by Date: [hylafax-users] extra empty page being printed on receiving fax machine
- Next by Date: [hylafax-users] faxmail trouble with coversheets
- Previous by thread: Re: [hylafax-users] extra empty page being printed on receiving fax machine
- Next by thread: [hylafax-users] faxmail trouble with coversheets
- Index(es):
Project hosted by iFAX Solutions