 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
- Subject: Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- From: "Frederic Trudeau" <ftrudeau@xxxxxxx>
- Cc: <hylafax-users@xxxxxxxxxxx>
- Date: Tue, 22 Jun 2004 11:27:56 -0400
Greetings, and thanks for your help so far. Your feedback helped somewhat. I was able to send a fax, but it seams the modem hangs after processing a random number of fax requests in the queue. Is there a specific config for a Sportster 288000/Fax V6.0 ? When using faxaddmodem, we have the choice to configure the modem as a Class1 or Class2.0. We tried both choices. < BEGIN > Probing for best speed to talk to modem: 38400 OK. This modem looks to have support for Class 1 and 2.0. How should it be configured [1]? 2.0 Hmm, this looks like a Class 2.0 modem. Modem manufacturer is "USRobotics Sportster 28800 V.34 Fax". Modem model is "Product type US/Canada External". DTE-DCE flow control scheme [default]? Using prototype configuration file usr-2.0... The modem configuration parameters are: ModemFlowControl: rtscts ModemHardFlowCmd: AT&H1&I0&R2 ModemNoFlowCmd: AT&H0&I0&R1 ModemRate: 19200 ModemResultCodesCmd: ATQ0X4 ModemSetVolumeCmd: "ATM0 ATM1 ATM1 ATM1 ATM1" ModemSetupAACmd: AT+FAA=1 ModemSetupDCDCmd: AT&C1 ModemSetupDTRCmd: ATS13=1&D2 ModemSoftFlowCmd: AT&H2&I2&R1 Class2BUGCmd: AT+FBU=0 Class2CQQueryCmd: !(0),(0) Class2NRCmd: AT+FNR=1,1,1,0 Class2SendRTC: yes < END > Here is the output of probemodem < BEGIN > Serial port that modem is connected to []? ttyS0 Now we are going to probe the tty port. This takes a few seconds, so be patient. Note that if you do not have the modem cabled to the port, or the modem is turned off, this may hang (just go and cable up the modem or turn it on, or whatever). Probing for best speed to talk to modem: 38400 OK. This looks like a Class 1 and 2.0 modem. ATI0 RESULT = "OK" RESPONSE = "2886" ATI1 RESULT = "OK" RESPONSE = "1554" ATI2 RESULT = "OK" RESPONSE = "OK" ATI3 RESULT = "OK" RESPONSE = "Sportster 28800/Fax V6.0" ATI4 RESULT = "OK" RESPONSE = "USRobotics Sportster 28800 V.34 Fax Settings..." ATI5 RESULT = " S56=016 S57=000" RESPONSE = "USRobotics Sportster 28800 V.34 Fax NVRAM Settings..." ATI6 RESULT = "OK" RESPONSE = "USRobotics Sportster 28800 V.34 Fax Link Diagnostics..." ATI7 RESULT = "OK" RESPONSE = "Configuration Profile..." ATI8 RESULT = "ERROR" RESPONSE = "ERROR" ATI9 RESULT = "ERROR" RESPONSE = "ERROR" Class 1 stuff... AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR" AT+FTH=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRH=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FTM=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRM=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR" Class 2.0 stuff... AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK" AT+FCLASS=2.0 RESULT = "OK" RESPONSE = "OK" AT+FCLASS? RESULT = "OK" RESPONSE = "0" AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR" AT+FDR=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIP=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAP=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FAP? RESULT = "ERROR" RESPONSE = "ERROR" AT+FBS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FBO=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FBO? RESULT = "ERROR" RESPONSE = "ERROR" AT+FBU=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FBU? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCC=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCC? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCQ=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCQ? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCR=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCR? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCT=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FCT? RESULT = "ERROR" RESPONSE = "ERROR" AT+FEA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FEA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FFC=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FFC? RESULT = "ERROR" RESPONSE = "ERROR" AT+FFD=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FFD? RESULT = "ERROR" RESPONSE = "ERROR" AT+FHS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIE=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIE? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIT=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FIT? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLI=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLI? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLO=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLO? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLP=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FLP? RESULT = "ERROR" RESPONSE = "ERROR" AT+FMI? RESULT = "ERROR" RESPONSE = "ERROR" AT+FMM? RESULT = "ERROR" RESPONSE = "ERROR" AT+FMR? RESULT = "ERROR" RESPONSE = "ERROR" AT+FMS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FMS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FNR=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FNR? RESULT = "ERROR" RESPONSE = "ERROR" AT+FNS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FNS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPI=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPI? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPP=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPP? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPR=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPR? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPS=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPS? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPW=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FPW? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRQ=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRQ? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRY=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FRY? RESULT = "ERROR" RESPONSE = "ERROR" AT+FSA=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FSA? RESULT = "ERROR" RESPONSE = "ERROR" AT+FSP=? RESULT = "ERROR" RESPONSE = "ERROR" AT+FSP? RESULT = "ERROR" RESPONSE = "ERROR" AT+IFC=? RESULT = "ERROR" RESPONSE = "ERROR" AT+IFC? RESULT = "ERROR" RESPONSE = "ERROR" AT+IPR=? RESULT = "ERROR" RESPONSE = "ERROR" AT+IPR? RESULT = "ERROR" RESPONSE = "ERROR" AT+FKS=? RESULT = "ERROR" RESPONSE = "ERROR" < END > - Frederic Trudeau <ftrudeau@xxxxxxx> Programmation / Departement reseau Web: http://www.cam.org ----- Original Message ----- From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> To: "Frederic Trudeau" <ftrudeau@xxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Monday, June 21, 2004 5:07 PM Subject: Re: [hylafax-users] Waiting for modem to come ready ... wrong config ? > On 2004.06.21 13:59 Frederic Trudeau wrote: > > > ati3 > > Sportster 28800/Fax V6.0 > > > > OK > > ati6 > > USRobotics Sportster 28800 V.34 Fax Link Diagnostics... > > > Im using the default config, which i copied/pasted here ... default > > one for now ([spooldir]/config/rockwell-rc), included in this mail > > below. > > You need to use config/usr-xon. > > faxaddmodem ttyS0 > > should pick that up for you automatically. If not, then please post > the probemodem output for the modem. > > Lee. > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null > *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- References:
- [hylafax-users] List protocol question
- From: Michael Balamuth
- [hylafax-users] Waiting for modem to come ready ... wrong config ?
- From: Frederic Trudeau
- Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- From: Lee Howard
- [hylafax-users] List protocol question
- Prev by Date: Re: [hylafax-users] [hylafax-devel] Gestetner Aficio fax problems
- Next by Date: Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- Previous by thread: Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- Next by thread: Re: [hylafax-users] Waiting for modem to come ready ... wrong config ?
- Index(es):
Project hosted by iFAX Solutions