Re: [hylafax-users] Ring detect without successful handshake

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

This pretty much concludes that there is a firmware/hardware problem 
with the modem which prevents it from detecting the remote carrier.

Unless you can increase the sensitivity or gain somehow, I don't think 
that there's anything you can do except for turning to the manufacturer 
for a fix or to get a different modem.

Lee.


On 2004.06.06 19:20 hchris@xxxxxxxxxxx wrote:
> Hi Lee,
>
> yes I can, and I have done, but now only the message is different:
> No carrier detected
> But I am sure that this fax is working (Fax2mail Service).
> Has anybody another idea?
>
> This was the detailed result:
>
>     ---- Transcript of session follows ----
> Jun 06 20:27:58.92: [ 5425]: SESSION BEGIN 00000945 4969791266777
> Jun 06 20:27:58.92: [ 5425]: HylaFAX (tm) Version 4.1.8
> Jun 06 20:27:58.92: [ 5425]: SEND FAX: JOB 899 DEST +4969791266777
> COMMID 00000945
> DEVICE '/dev/ttyD004'
> Jun 06 20:27:58.92: [ 5425]: DELAY 75 ms
> Jun 06 20:27:58.99: [ 5425]: DELAY 2600 ms
> Jun 06 20:28:02.60: [ 5425]: DELAY 10 ms
> Jun 06 20:28:02.61: [ 5425]: <-- [4:ATZ\r]
> Jun 06 20:28:02.76: [ 5425]: --> [2:OK]
> Jun 06 20:28:02.76: [ 5425]: DELAY 3000 ms
> Jun 06 20:28:05.76: [ 5425]: <-- [5:ATE0\r]
> Jun 06 20:28:05.79: [ 5425]: --> [4:ATE0]
> Jun 06 20:28:05.79: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.79: [ 5425]: <-- [5:ATV1\r]
> Jun 06 20:28:05.82: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.82: [ 5425]: <-- [5:ATQ0\r]
> Jun 06 20:28:05.85: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.85: [ 5425]: <-- [7:ATS0=0\r]
> Jun 06 20:28:05.88: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.88: [ 5425]: <-- [7:ATS8=2\r]
> Jun 06 20:28:05.91: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.91: [ 5425]: <-- [8:ATS7=60\r]
> Jun 06 20:28:05.94: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.94: [ 5425]: <-- [6:AT&K3\r]
> Jun 06 20:28:05.97: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.97: [ 5425]: <-- [6:AT&D2\r]
> Jun 06 20:28:05.99: [ 5425]: --> [2:OK]
> Jun 06 20:28:05.99: [ 5425]: <-- [6:AT&C1\r]
> Jun 06 20:28:06.02: [ 5425]: --> [2:OK]
> Jun 06 20:28:06.02: [ 5425]: <-- [12:AT+FCLASS=1\r]
> Jun 06 20:28:06.05: [ 5425]: --> [2:OK]
> Jun 06 20:28:06.05: [ 5425]: <-- [5:ATM0\r]
> Jun 06 20:28:06.08: [ 5425]: --> [2:OK]
> Jun 06 20:28:06.08: [ 5425]: <-- [12:AT+FCLASS=1\r]
> Jun 06 20:28:06.21: [ 5425]: --> [2:OK]
> Jun 06 20:28:06.21: [ 5425]: DIAL 90114969791266777
> Jun 06 20:28:06.21: [ 5425]: <-- [22:ATDT90114969791266777\r]
> Jun 06 20:29:12.33: [ 5425]: --> [10:NO CARRIER]
> Jun 06 20:29:12.34: [ 5425]: SEND FAILED: JOB 899 DEST +4969791266777
> ERR No carrier
> detected
> Jun 06 20:29:12.34: [ 5425]: SEND FAILED: JOB 899 DEST +4969791266777
> ERR No carrier
> detected; too many attempts to dial
> Jun 06 20:29:12.34: [ 5425]: <-- [5:ATH0\r]
> Jun 06 20:29:12.45: [ 5425]: --> [2:OK]
> Jun 06 20:29:12.45: [ 5425]: SESSION END
>
>
>
>
> Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote ..
> > On 2004.06.06 12:24 hchris@xxxxxxxxxxx wrote:
> > > Hi,
> > > I have installed a new faxserver with a Cendyne Faxmodem and I got
> a
> > > lot of times  the message: (1 or to from 3 faxes)
> > > "Ring detect without successful handshake"
> > > This message I do not know from another modem on another
> faxserver.
> > > And this happens also if I am sure that there is a fax-machine on
> the
> > > other side.
> > >
> > > Can anyone help me to prevent this error?
> >
> > > Jun 06 12:57:22.14: [32649]: <-- [22:ATDT90114969791266777\r]
> > > Jun 06 12:58:27.81: [32649]: --> [8:+FHNG: 1]
> >
> > Can you switch to Class 1?
> >
> > Lee.
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
> sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*