Re: [hylafax-users] Ring detect without successful handshake

[hchris@xxxxxxxxxxx]

Hi Lee,

yes I can, and I have done, but now only the message is different:
No carrier detected
But I am sure that this fax is working (Fax2mail Service).
Has anybody another idea?

This was the detailed result:

    ---- Transcript of session follows ----
Jun 06 20:27:58.92: [ 5425]: SESSION BEGIN 00000945 4969791266777
Jun 06 20:27:58.92: [ 5425]: HylaFAX (tm) Version 4.1.8
Jun 06 20:27:58.92: [ 5425]: SEND FAX: JOB 899 DEST +4969791266777 COMMID 00000945
DEVICE '/dev/ttyD004'
Jun 06 20:27:58.92: [ 5425]: DELAY 75 ms
Jun 06 20:27:58.99: [ 5425]: DELAY 2600 ms
Jun 06 20:28:02.60: [ 5425]: DELAY 10 ms
Jun 06 20:28:02.61: [ 5425]: <-- [4:ATZ\r]
Jun 06 20:28:02.76: [ 5425]: --> [2:OK]
Jun 06 20:28:02.76: [ 5425]: DELAY 3000 ms
Jun 06 20:28:05.76: [ 5425]: <-- [5:ATE0\r]
Jun 06 20:28:05.79: [ 5425]: --> [4:ATE0]
Jun 06 20:28:05.79: [ 5425]: --> [2:OK]
Jun 06 20:28:05.79: [ 5425]: <-- [5:ATV1\r]
Jun 06 20:28:05.82: [ 5425]: --> [2:OK]
Jun 06 20:28:05.82: [ 5425]: <-- [5:ATQ0\r]
Jun 06 20:28:05.85: [ 5425]: --> [2:OK]
Jun 06 20:28:05.85: [ 5425]: <-- [7:ATS0=0\r]
Jun 06 20:28:05.88: [ 5425]: --> [2:OK]
Jun 06 20:28:05.88: [ 5425]: <-- [7:ATS8=2\r]
Jun 06 20:28:05.91: [ 5425]: --> [2:OK]
Jun 06 20:28:05.91: [ 5425]: <-- [8:ATS7=60\r]
Jun 06 20:28:05.94: [ 5425]: --> [2:OK]
Jun 06 20:28:05.94: [ 5425]: <-- [6:AT&K3\r]
Jun 06 20:28:05.97: [ 5425]: --> [2:OK]
Jun 06 20:28:05.97: [ 5425]: <-- [6:AT&D2\r]
Jun 06 20:28:05.99: [ 5425]: --> [2:OK]
Jun 06 20:28:05.99: [ 5425]: <-- [6:AT&C1\r]
Jun 06 20:28:06.02: [ 5425]: --> [2:OK]
Jun 06 20:28:06.02: [ 5425]: <-- [12:AT+FCLASS=1\r]
Jun 06 20:28:06.05: [ 5425]: --> [2:OK]
Jun 06 20:28:06.05: [ 5425]: <-- [5:ATM0\r]
Jun 06 20:28:06.08: [ 5425]: --> [2:OK]
Jun 06 20:28:06.08: [ 5425]: <-- [12:AT+FCLASS=1\r]
Jun 06 20:28:06.21: [ 5425]: --> [2:OK]
Jun 06 20:28:06.21: [ 5425]: DIAL 90114969791266777
Jun 06 20:28:06.21: [ 5425]: <-- [22:ATDT90114969791266777\r]
Jun 06 20:29:12.33: [ 5425]: --> [10:NO CARRIER]
Jun 06 20:29:12.34: [ 5425]: SEND FAILED: JOB 899 DEST +4969791266777 ERR No carrier
detected
Jun 06 20:29:12.34: [ 5425]: SEND FAILED: JOB 899 DEST +4969791266777 ERR No carrier
detected; too many attempts to dial
Jun 06 20:29:12.34: [ 5425]: <-- [5:ATH0\r]
Jun 06 20:29:12.45: [ 5425]: --> [2:OK]
Jun 06 20:29:12.45: [ 5425]: SESSION END




Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote ..
> On 2004.06.06 12:24 hchris@xxxxxxxxxxx wrote:
> > Hi,
> > I have installed a new faxserver with a Cendyne Faxmodem and I got a
> > lot of times  the message: (1 or to from 3 faxes)
> > "Ring detect without successful handshake"
> > This message I do not know from another modem on another faxserver.
> > And this happens also if I am sure that there is a fax-machine on the
> > other side.
> > 
> > Can anyone help me to prevent this error?
> 
> > Jun 06 12:57:22.14: [32649]: <-- [22:ATDT90114969791266777\r]
> > Jun 06 12:58:27.81: [32649]: --> [8:+FHNG: 1]
> 
> Can you switch to Class 1?
> 
> Lee.
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*