HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] HylaFax Sending Blank Pages



No.

ModemAnswerCmd:	AT+FCC=,,,,1;A
ModemDialCmd:   AT+FCC=,,,,1;DT%s

You can also accomplish this by setting Class2DCCQueryCmd.

Class2DCCQueryCmd: "!(0,1),(0-5),(0-2),(0-2),(0,1),(0,1),(0),(0-7)"

You'll need to compare this against your AT+FCC=? response, though, and only disable th 6th parameter from being 2 or 3.

Lee.
On 2004.05.07 14:30 Eric Butler wrote:
Is this the correct option/value that you are thinking of? The man
page seems
to suggest it only applies to incoming faxes, but it was the only
thing I
found.

RecvDataFormat: "2-D MR"

Thanks.

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Friday, May 07, 2004 2:10 PM
To: Eric Butler
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] HylaFax Sending Blank Pages

On 2004.05.07 13:18 Eric Butler wrote:

> Should say "For some reason all pages SENT by our hylafax server are
> completely blank."

>  May  7 13:02:39 lynx FaxSend[30666]: MODEM DIGI INTERNATIONAL RAS
> modem

I think that you're going to need to disable MMR on in the modem
config
file.  If I remember correctly the Digis have broken MMR in Class 2.0.

Lee.


____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
*To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions