HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hello everybody & one landscape/portrait question




Whoops.... my apologies....

You asked about PDF and my response really concerns PCL  - please ignore everything I said......

although the concept would most likely still hold for PDF - just the escaped characters should change.

One thing you could try to determine the orientation codes would be to get a blank PDF page and save it as landscape. Save it under a new filename as portrait and compare the differences - with any luck you'll find it's just a couple of characters changing....

Again sorry about that - there are just too many damned acronyms in this world *grin*

Good luck with your problem....

Bruce Whittaker,
----------------------------------------------------------------------------------------
This e-mail may contain confidential or privileged information.   If you have received it in error, please notify the sender immediately via return e-mail and then delete the original e-mail. EnergyAustralia has collected your business contact details for dealing with you in your business capacity. More information about how we handle your personal information, including your right of access is contained at http://www.energy.com.au.
----------------------------------------------------------------------------------------






"Laurent CELLA" <lcella@xxxxxxxxx>

06/05/2004 23:03

       
        To:        <hylafax-users@xxxxxxxxxxx>, "Bruce Whittaker" <bwhittak@xxxxxxxxxxxxx>
        cc:        
        Subject:        Re: [hylafax-users] hello everybody & one landscape/portrait question




Thanx a lot for ur kind response and  idea Bruce:)
 
However i have some problems with ur escape  caracters.
I found a list with hexa codes  there:
http://www.manualy.sk/navody/pcl3.htm
 
but i cant find any of the codes editing any of the  pdf i opened (using ultraedit)
I tried it also with those files converted to  postscript [i am total newbie with those files so i made a try] :  idem.
 
does it came from the fact those tags would be not  mandatory or anything else ?
could it came from any encryption of pdf  
 
do you know how to do the same manipulating  postscript files ? :p
 
thank alots.
 
Laurent
 
 
 
----- Original Message -----
From:  Bruce  Whittaker
To: hylafax-users@xxxxxxxxxxx
Sent: Thursday, May 06, 2004 4:16  AM
Subject: Re: [hylafax-users] hello  everybody & one landscape/portrait question


Hi back at ya !  

Gosh - with Battle Hammers and Sumotori  flying around - it sounds like you have some heavy duty problems on you hands  

If you have PDF documents and you  want to convert them all to the one layout (ie, portrait ) - you need to write  a small program to convert the PDF parper orientations to what you want. I  have written one in C to force PDF documents to print to a specified tray and  this could easily be adapted to force the paper orientation- give me a yell if  you want a copy.

In short - you  need to convert an 'Esc&l1O" to an 'Esc&l0O" wherever you find it in  the document.

Cheers,  

Bruce Whittaker,
CASS  Support,
Extension  34193
External     (02) 9269  4193.
----------------------------------------------------------------------------------------
This  e-mail may contain confidential or privileged information.   If you have  received it in error, please notify the sender immediately via return e-mail  and then delete the original e-mail. EnergyAustralia has collected your  business contact details for dealing with you in your business capacity. More  information about how we handle your personal information, including your  right of access is contained at  http://www.energy.com.au.
----------------------------------------------------------------------------------------





"Laurent CELLA"  <lcella@xxxxxxxxx>
Sent by: hylafax-users-bounce@xxxxxxxxxxx  

05/05/2004 19:02
       
        To:         <hylafax-users@xxxxxxxxxxx>
        cc:         
         Subject:        [hylafax-users] hello  everybody & one landscape/portrait  question




First of all I want to say hello to every active  user of the  mailing list :)
   
I am a beginner using hyla-fax and i  have my  first question there.
 
***
 
i need  to submit pdf files using the sendfax  command.
 
The  problem is some of my files contains pages that  are faxed in landscape (  as the original page are ) and i want to know - if  possible -  
if i can configure something in the   hyla-fax process to make the fax server automaticaly rotate some of  the  pages, those wich deserve to be rotated.
 
As a  first step, I would like to be able to rotate  the whole document without  checking each individual page.
 
I 've found a first idea  wich appears too heavy for  me (using a battle hammer to smash a fly  ) :
- using pdf2ps.  
- using ghostscript -sDEVICE=bbox command to  know  boundaries of the ps output ( to know if the pictures should be  furthermore  rotated )
-  converting the postcript output to a serie of  tiff files. (using gs  
- using another tool to rotate all  those  pictures
- submiting all  the tif pictures to hylafax  server
 
this "solution" not yet  implemented appears to me  as heavy as a sumotori diving in a  swimming pool.
 
Anybody have  a better idea ? :p
 
 
Laurent.  
 
 
 
 



*******************************************************************
eSafe scanned this email for viruses, vandals and malicious content
*******************************************************************





*******************************************************************
eSafe scanned this email for viruses, vandals and malicious content
*******************************************************************



Project hosted by iFAX Solutions