HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] receieved faxs .tif file corrupt



Try downgrading your TIFF to 3.5.7.

-Darren

-- 
Darren Nickerson
Senior Sales & Support Engineer
iFAX Solutions, Inc. www.ifax.com
darren.nickerson@xxxxxxxx
+1.215.438.4638 ext 8106 office
+1.215.243.8335 fax

----- Original Message ----- 
From: "Eric Mclain" <emclain@xxxxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Monday, April 19, 2004 8:18 PM
Subject: [hylafax-users] receieved faxs .tif file corrupt


>
> Hi
>
> Im having trouble with recieved faxes
>
> i can send faxs no problem, but the .tif files of recieved faxs are
> corrupt
> no viewer i can find can read them
>
> If i try to convert them to ps using tiff2ps or fax2ps, i get errors like:
>
> Fax3Decode2D: fax00013.tif: Bad code word at scanline 0 (x 89).
> Fax3Decode2D: fax00013.tif: Uncompressed data (not supported) at scanline
0 (x 0).
> Fax3Decode2D: Warning, fax00013.tif: Premature EOL at scanline 0 (got 89,
expected 1728).
>
> setup:
> HylaFAX v4.1.8 under SunCobalt Qube3 Linux server based on RedHat 6.2 with
> SunCobalt modified 2.2.16 linux kernel  with gcc 2.95.3 and libtiff 3.6.1
> hylafax and libtiff are compiled from source
> Modem: external
> Product code (ATI0) is "TP560 Data/Fax/Voice 56K Modem".
> Other information (ATI3) is "TP560 Data/Fax/Voice 56K Modem".
>
> some history:
>
> ive been running hylafax 4.1.5 with no problem for a since it came out on
> this
> server, until the hard drive crashed last week
> after replacing the hard drive, i set up 4.1.8.  did something change
> between 4.1.5 and 4.1.8 that would cause this problem?
>
> i didn't include the recieve log since it's so long, but i dont see any
> obvious errors in it
>
> thanks, eric
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions