 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] recieve error with terboline19k2 modem
- To: hylafax-users@xxxxxxxxxxx
- Subject: Re: [hylafax-users] recieve error with terboline19k2 modem
- From: Volker Weber <hylafax@xxxxxxxxxxxxxxxxxx>
- Date: Thu, 11 Mar 2004 11:45:19 +0100
Lee Howard wrote:
On 2004.03.08 14:16 Volker Weber wrote:[...]
Hello,
i have just set up hylafax-4.1.8 on a linux box (debian woody, kernel 2.4.25) my modem is a TKR Terboline 19k2
You probably need to set Class2RecvDataTrigger to "\022".
Lee.
After setting this it loocks better, but i still can't recieve.
i have three logs attched, the first one created a corrupt tiff (
file says: "TIFF image data, little-endian", but i cant display or convert it ).
the second an third came from teh same sender and produced no output (tiff file).
any hints?
Mar 09 00:20:33.24: [ 3271]: SESSION BEGIN 00000009 494416834891
Mar 09 00:20:33.24: [ 3271]: HylaFAX (tm) Version 4.1.8
Mar 09 00:20:33.25: [ 3271]: <-- [4:ATA\r]
Mar 09 00:20:41.93: [ 3271]: --> [5:+FCON]
Mar 09 00:20:41.93: [ 3271]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Mar 09 00:20:41.93: [ 3271]: RECV FAX: begin
Mar 09 00:20:43.37: [ 3271]: --> [28:+FTSI:"6913303042932 "]
Mar 09 00:20:43.37: [ 3271]: REMOTE TSI "6913303042932"
Mar 09 00:20:43.70: [ 3271]: --> [22:+FDCS: 1,3,0,2,0,0,0,0]
Mar 09 00:20:43.70: [ 3271]: REMOTE wants 9600 bit/s
Mar 09 00:20:43.70: [ 3271]: REMOTE wants page width 1728 pixels in 215 mm
Mar 09 00:20:43.70: [ 3271]: REMOTE wants unlimited page length
Mar 09 00:20:43.70: [ 3271]: REMOTE wants 7.7 line/mm
Mar 09 00:20:43.70: [ 3271]: REMOTE wants 1-D MR
Mar 09 00:20:44.00: [ 3271]: --> [2:OK]
Mar 09 00:20:44.00: [ 3271]: <-- [7:AT+FDR\r]
Mar 09 00:20:46.71: [ 3271]: --> [5:+FCFR]
Mar 09 00:20:46.71: [ 3271]: --> [22:+FDCS: 1,3,0,2,0,0,0,0]
Mar 09 00:20:46.71: [ 3271]: REMOTE wants 9600 bit/s
Mar 09 00:20:46.71: [ 3271]: REMOTE wants page width 1728 pixels in 215 mm
Mar 09 00:20:46.71: [ 3271]: REMOTE wants unlimited page length
Mar 09 00:20:46.71: [ 3271]: REMOTE wants 7.7 line/mm
Mar 09 00:20:46.71: [ 3271]: REMOTE wants 1-D MR
Mar 09 00:20:47.38: [ 3271]: --> [7:CONNECT]
Mar 09 00:20:47.38: [ 3271]: RECV: begin page
Mar 09 00:20:47.38: [ 3271]: RECV: send trigger 022
Mar 09 00:20:47.38: [ 3271]: <-- data [1]
Mar 09 00:21:03.25: [ 3271]: RECV: 0 total lines, 0 bad lines, 0 consecutive bad lines
Mar 09 00:21:03.25: [ 3271]: --> [7:+FPTS:1]
Mar 09 00:21:04.52: [ 3271]: --> [6:+FET:2]
Mar 09 00:21:04.52: [ 3271]: RECV recv EOP (no more pages or documents)
Mar 09 00:21:04.52: [ 3271]: --> [2:OK]
Mar 09 00:21:04.52: [ 3271]: RECV send MCF (message confirmation)
Mar 09 00:21:04.52: [ 3271]: RECV FAX (00000009): from 6913303042932, page 1 in
0:20, INF, 7.7 line/mm, 1-D MR, 9600 bit/s
Mar 09 00:21:04.52: [ 3271]: RECV FAX (00000009): recvq/fax00005.tif from 6913303042932, route to <unspecified>, 1 pages in 0:23
Mar 09 00:21:04.52: [ 3271]: <-- [7:AT+FDR\r]
Mar 09 00:21:07.49: [ 3271]: --> [7:+FHNG:0]
Mar 09 00:21:07.49: [ 3271]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Mar 09 00:21:07.49: [ 3271]: RECV FAX: bin/faxrcvd "recvq/fax00005.tif" "ttyS1"
"00000009" "" "" ""
Mar 09 00:21:07.79: [ 3271]: RECV FAX: end
Mar 09 00:21:07.79: [ 3271]: SESSION END
Mar 11 10:43:24.07: [ 519]: SESSION BEGIN 00000010 494416834891
Mar 11 10:43:24.07: [ 519]: HylaFAX (tm) Version 4.1.8
Mar 11 10:43:24.07: [ 519]: <-- [4:ATA\r]
Mar 11 10:43:33.24: [ 519]: --> [5:+FCON]
Mar 11 10:43:33.24: [ 519]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Mar 11 10:43:33.24: [ 519]: RECV FAX: begin
Mar 11 10:43:34.80: [ 519]: --> [28:+FTSI:" +49 04488 529190"]
Mar 11 10:43:34.80: [ 519]: REMOTE TSI "+49 04488 529190"
Mar 11 10:43:35.14: [ 519]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 11 10:43:35.14: [ 519]: REMOTE wants 14400 bit/s
Mar 11 10:43:35.14: [ 519]: REMOTE wants page width 1728 pixels in 215 mm
Mar 11 10:43:35.14: [ 519]: REMOTE wants unlimited page length
Mar 11 10:43:35.14: [ 519]: REMOTE wants 3.85 line/mm
Mar 11 10:43:35.14: [ 519]: REMOTE wants 2-D MR
Mar 11 10:43:36.78: [ 519]: --> [2:OK]
Mar 11 10:43:36.78: [ 519]: <-- [7:AT+FDR\r]
Mar 11 10:43:39.50: [ 519]: --> [5:+FCFR]
Mar 11 10:43:39.50: [ 519]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 11 10:43:39.50: [ 519]: REMOTE wants 14400 bit/s
Mar 11 10:43:39.50: [ 519]: REMOTE wants page width 1728 pixels in 215 mm
Mar 11 10:43:39.50: [ 519]: REMOTE wants unlimited page length
Mar 11 10:43:39.50: [ 519]: REMOTE wants 3.85 line/mm
Mar 11 10:43:39.50: [ 519]: REMOTE wants 2-D MR
Mar 11 10:43:40.76: [ 519]: --> [7:CONNECT]
Mar 11 10:43:40.76: [ 519]: RECV: begin page
Mar 11 10:43:40.76: [ 519]: RECV: send trigger 022
Mar 11 10:43:40.76: [ 519]: <-- data [1]
Mar 11 10:43:50.54: [ 519]: RECV: 57 total lines, 53 bad lines, 34 consecutive
bad lines
Mar 11 10:43:50.54: [ 519]: --> [7:+FPTS:1]
Mar 11 10:43:51.87: [ 519]: --> [6:+FET:2]
Mar 11 10:43:51.87: [ 519]: RECV recv EOP (no more pages or documents)
Mar 11 10:43:51.87: [ 519]: --> [2:OK]
Mar 11 10:43:51.87: [ 519]: RECV: REJECT page quality, 7% good lines (95% required)
Mar 11 10:43:51.87: [ 519]: RECV send RTN (retrain negative)
Mar 11 10:43:51.87: [ 519]: <-- [10:AT+FPTS=2\r]
Mar 11 10:43:52.03: [ 519]: --> [2:OK]
Mar 11 10:43:52.03: [ 519]: <-- [7:AT+FDR\r]
Mar 11 10:43:54.99: [ 519]: --> [7:+FHNG:0]
Mar 11 10:43:54.99: [ 519]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Mar 11 10:43:54.99: [ 519]: RECV FAX (00000010): recvq/fax00006.tif from +49 04488 529190, route to <unspecified>, 0 pages in 0:21
Mar 11 10:43:55.01: [ 519]: RECV FAX: Normal and proper end of connection
Mar 11 10:43:55.01: [ 519]: RECV FAX (00000010): session with +49 04488 529190
terminated abnormally: Normal and proper end of connection
Mar 11 10:43:55.01: [ 519]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS1"
"00000010" "Normal and proper end of connection" "" ""
Mar 11 10:43:55.18: [ 519]: RECV FAX: end
Mar 11 10:43:55.18: [ 519]: SESSION END
Mar 11 10:47:55.26: [ 519]: SESSION BEGIN 00000011 494416834891
Mar 11 10:47:55.26: [ 519]: HylaFAX (tm) Version 4.1.8
Mar 11 10:47:55.26: [ 519]: <-- [4:ATA\r]
Mar 11 10:48:04.04: [ 519]: --> [5:+FCON]
Mar 11 10:48:04.04: [ 519]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Mar 11 10:48:04.04: [ 519]: RECV FAX: begin
Mar 11 10:48:05.62: [ 519]: --> [28:+FTSI:" +49 04488 529190"]
Mar 11 10:48:05.62: [ 519]: REMOTE TSI "+49 04488 529190"
Mar 11 10:48:05.95: [ 519]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 11 10:48:05.95: [ 519]: REMOTE wants 14400 bit/s
Mar 11 10:48:05.95: [ 519]: REMOTE wants page width 1728 pixels in 215 mm
Mar 11 10:48:05.95: [ 519]: REMOTE wants unlimited page length
Mar 11 10:48:05.95: [ 519]: REMOTE wants 3.85 line/mm
Mar 11 10:48:05.95: [ 519]: REMOTE wants 2-D MR
Mar 11 10:48:07.59: [ 519]: --> [2:OK]
Mar 11 10:48:07.59: [ 519]: <-- [7:AT+FDR\r]
Mar 11 10:48:10.31: [ 519]: --> [5:+FCFR]
Mar 11 10:48:10.31: [ 519]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 11 10:48:10.31: [ 519]: REMOTE wants 14400 bit/s
Mar 11 10:48:10.31: [ 519]: REMOTE wants page width 1728 pixels in 215 mm
Mar 11 10:48:10.31: [ 519]: REMOTE wants unlimited page length
Mar 11 10:48:10.31: [ 519]: REMOTE wants 3.85 line/mm
Mar 11 10:48:10.31: [ 519]: REMOTE wants 2-D MR
Mar 11 10:48:11.57: [ 519]: --> [7:CONNECT]
Mar 11 10:48:11.57: [ 519]: RECV: begin page
Mar 11 10:48:11.57: [ 519]: RECV: send trigger 022
Mar 11 10:48:11.57: [ 519]: <-- data [1]
Mar 11 10:48:21.69: [ 519]: RECV: 962 total lines, 620 bad lines, 109 consecutive bad lines
Mar 11 10:48:21.69: [ 519]: --> [7:+FPTS:1]
Mar 11 10:48:23.02: [ 519]: --> [6:+FET:2]
Mar 11 10:48:23.02: [ 519]: RECV recv EOP (no more pages or documents)
Mar 11 10:48:23.02: [ 519]: --> [2:OK]
Mar 11 10:48:23.02: [ 519]: RECV: REJECT page quality, 35% good lines (95% required)
Mar 11 10:48:23.02: [ 519]: RECV send RTN (retrain negative)
Mar 11 10:48:23.02: [ 519]: <-- [10:AT+FPTS=2\r]
Mar 11 10:48:23.18: [ 519]: --> [2:OK]
Mar 11 10:48:23.18: [ 519]: <-- [7:AT+FDR\r]
Mar 11 10:48:26.14: [ 519]: --> [7:+FHNG:0]
Mar 11 10:48:26.14: [ 519]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Mar 11 10:48:26.14: [ 519]: RECV FAX (00000011): recvq/fax00007.tif from +49 04488 529190, route to <unspecified>, 0 pages in 0:22
Mar 11 10:48:26.14: [ 519]: RECV FAX: Normal and proper end of connection
Mar 11 10:48:26.14: [ 519]: RECV FAX (00000011): session with +49 04488 529190
terminated abnormally: Normal and proper end of connection
Mar 11 10:48:26.14: [ 519]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif" "ttyS1"
"00000011" "Normal and proper end of connection" "" ""
Mar 11 10:48:26.27: [ 519]: RECV FAX: end
Mar 11 10:48:26.27: [ 519]: SESSION END
--
-------------------------------------------------------------------------
Volker Weber Dietrichsweg 38a 26127 Oldenburg Germany
MAILTO:Volker@xxxxxxxxxxxxxxxxxx HTTP://www.v-weber.de
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] recieve error with terboline19k2 modem
- From: Lee Howard
- Re: [hylafax-users] recieve error with terboline19k2 modem
- References:
- [hylafax-users] recieve error with terboline19k2 modem
- From: Volker Weber
- Re: [hylafax-users] recieve error with terboline19k2 modem
- From: Lee Howard
- [hylafax-users] recieve error with terboline19k2 modem
- Prev by Date: Re: [hylafax-users] Routing received faxes
- Next by Date: Re: [hylafax-users] Routing received faxes
- Previous by thread: Re: [hylafax-users] recieve error with terboline19k2 modem
- Next by thread: Re: [hylafax-users] recieve error with terboline19k2 modem
- Index(es):
Project hosted by iFAX Solutions