[hylafax-users] recieve error with terboline19k2 modem

[Volker Weber <volker@xxxxxxxxxxxxxxxxxx>]

Hello,

i have just set up hylafax-4.1.8 on a linux box
(debian woody, kernel 2.4.25)
my modem is a TKR Terboline 19k2
i have used this modem some years before on an Amiga 2000 with fax 
software Multifax to send and recieve.

now with hylafax i got a error when recieving a fax.
sending a fax out is ok.

I hope somone can help me.

log attached:

Mar 07 21:35:18.80: [  516]: SESSION BEGIN 00000005 494416834889
Mar 07 21:35:18.80: [  516]: HylaFAX (tm) Version 4.1.8
Mar 07 21:35:18.80: [  516]: <-- [4:ATA\r]
Mar 07 21:35:27.47: [  516]: --> [5:+FCON]
Mar 07 21:35:27.47: [  516]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Mar 07 21:35:27.47: [  516]: RECV FAX: begin
Mar 07 21:35:28.92: [  516]: --> [28:+FTSI:"6913303042932       "]
Mar 07 21:35:28.92: [  516]: REMOTE TSI "6913303042932"
Mar 07 21:35:29.24: [  516]: --> [22:+FDCS: 1,5,0,2,1,1,0,0]
Mar 07 21:35:29.24: [  516]: REMOTE wants 14400 bit/s
Mar 07 21:35:29.24: [  516]: REMOTE wants page width 1728 pixels in 215 mm
Mar 07 21:35:29.24: [  516]: REMOTE wants unlimited page length
Mar 07 21:35:29.24: [  516]: REMOTE wants 7.7 line/mm
Mar 07 21:35:29.24: [  516]: REMOTE wants 2-D MR
Mar 07 21:35:29.24: [  516]: REMOTE wants T.30 Annex A, ECM
Mar 07 21:35:30.91: [  516]: --> [2:OK]
Mar 07 21:35:30.91: [  516]: <-- [7:AT+FDR\r]
Mar 07 21:35:33.60: [  516]: --> [5:+FCFR]
Mar 07 21:35:33.60: [  516]: --> [22:+FDCS: 1,5,0,2,1,1,0,0]
Mar 07 21:35:33.60: [  516]: REMOTE wants 14400 bit/s
Mar 07 21:35:33.60: [  516]: REMOTE wants page width 1728 pixels in 215 mm
Mar 07 21:35:33.60: [  516]: REMOTE wants unlimited page length
Mar 07 21:35:33.60: [  516]: REMOTE wants 7.7 line/mm
Mar 07 21:35:33.60: [  516]: REMOTE wants 2-D MR
Mar 07 21:35:33.60: [  516]: REMOTE wants T.30 Annex A, ECM
Mar 07 21:35:34.39: [  516]: --> [7:CONNECT]
Mar 07 21:35:34.39: [  516]: RECV: begin page
Mar 07 21:35:34.39: [  516]: RECV: send trigger 021
Mar 07 21:35:34.39: [  516]: <-- data [1]
Mar 07 21:36:34.39: [  516]: <-- data [1]
Mar 07 21:36:34.39: [  516]: RECV: Missing EOL after 5 seconds
Mar 07 21:36:34.39: [  516]: REMOTE HANGUP: Missing EOL after 5 seconds 
(section 3.2/T.4) (code 91)
Mar 07 21:36:34.39: [  516]: RECV FAX (00000005): recvq/fax00001.tif 
from 6913303042932, route to <unspecified>, 0 pages in 1:07
Mar 07 21:36:34.39: [  516]: RECV FAX: Missing EOL after 5 seconds 
(section 3.2/T.4)
Mar 07 21:36:34.39: [  516]: <-- [6:AT+FK\r]
Mar 07 21:37:04.39: [  516]: MODEM <Timeout>
Mar 07 21:37:04.39: [  516]: RECV FAX (00000005): session with 
6913303042932 terminated abnormally: Missing EOL after 5 seconds 
(section 3.2/T.4)
Mar 07 21:37:04.39: [  516]: RECV FAX: bin/faxrcvd "recvq/fax00001.tif" 
"ttyS1" "00000005" "Missing EOL after 5 seconds (section 3.2/T.4)" "" ""
Mar 07 21:37:04.56: [  516]: RECV FAX: end
Mar 07 21:37:04.57: [  516]: SESSION END


--
-------------------------------------------------------------------------
      Volker Weber  Dietrichsweg 38a   26127 Oldenburg   Germany
      MAILTO:Volker@xxxxxxxxxxxxxxxxxx     HTTP://www.v-weber.de


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*