HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Net recieving faxes
> On 2004.03.05 08:04 Roman Schaller wrote:
> > Hi to all.
> >
> > I am right now installing a HylaFAX Server Version 4.1-200 on a SuSE
> > Linux
> > 8.0.
> > My Modem is an old ZyXEL Elite 2864.
Here is my config.ttyS0 file:
CountryCode: 41
AreaCode: 62
FAXNumber: +41.62.xxx.xxxx
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 9
SessionTracing: 0xFFF
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "Kontrolldienst STS"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
NoCarrierRetrys: 3
MaxRecvPages: 25
ModemType: Class2.0 # use class 2.0 interface
ModemRate: 38400 # 38.4 works fine
ModemFlowControl: rtscts # default
ModemNoFlowCmd: AT&H0 # disable flow control
ModemHardFlowCmd: AT&H3 # hardware flow control
ModemSoftFlowCmd: AT&H4 # software flow control
ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up
ModemSetupDCDCmd: AT&C1 # DCD tracks carrier
ModemSetupAACmd: AT+FAA=1 # enable in current class
ModemResetCmds: AT&B1&N0&S0S18=4S38.3=1
ModemDialCmd: ATDT%s # no '@' 'cuz then busy not
recognized
NoCarrierRetrys: 3 # retry 3 times on no carrier
ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#CIDName: "CALLER NAME: " # pattern string for identity info
PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet)
--
+++ NEU bei GMX und erstmalig in Deutschland: TÜV-geprüfter Virenschutz +++
100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*