 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Problems sending faxes
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Problems sending faxes
- From: David González <davidg@xxxxxxxx>
- Date: Tue, 02 Mar 2004 17:23:28 +0100
Hi,
I've installed hylafax in a Suse 9.0 computer with an us robotics fax/modem. I've a windows client with whfc. I can connect and I got a running and iddle state, but when I tried to send a fax I get the following error: Waiting for modem to come free. And the program sends me the following mail:
Your facsimile job to 0988369401 was not sent because: Busy signal detected
The job will be retried at 17:19.
---- Transcript of session follows ----
Mar 02 17:15:51.48: [ 2150]: SESSION BEGIN 00000001 34988369401 Mar 02 17:15:51.48: [ 2150]: HylaFAX (tm) Version 4.1.7 Mar 02 17:15:51.48: [ 2150]: SEND FAX: JOB 4 DEST 0988369401 COMMID 00000001 DEVICE '/dev/ttyS0' Mar 02 17:15:51.48: [ 2150]: MODEM set DTR OFF Mar 02 17:15:51.48: [ 2150]: DELAY 75 ms Mar 02 17:15:51.55: [ 2150]: MODEM set DTR ON Mar 02 17:15:51.55: [ 2150]: DELAY 2600 ms Mar 02 17:15:55.15: [ 2150]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS Mar 02 17:15:55.15: [ 2150]: DELAY 10 ms Mar 02 17:15:55.16: [ 2150]: MODEM flush i/o Mar 02 17:15:55.16: [ 2150]: <-- [4:ATZ\r] Mar 02 17:15:55.30: [ 2150]: --> [2:OK] Mar 02 17:15:55.30: [ 2150]: DELAY 3000 ms Mar 02 17:15:58.30: [ 2150]: <-- [5:ATE0\r] Mar 02 17:15:58.43: [ 2150]: --> [4:ATE0] Mar 02 17:15:58.43: [ 2150]: --> [2:OK] Mar 02 17:15:58.43: [ 2150]: <-- [5:ATV1\r] Mar 02 17:15:58.56: [ 2150]: --> [2:OK] Mar 02 17:15:58.56: [ 2150]: <-- [7:ATQ0X4\r] Mar 02 17:15:58.70: [ 2150]: --> [2:OK] Mar 02 17:15:58.70: [ 2150]: <-- [7:ATS0=0\r] Mar 02 17:15:58.83: [ 2150]: --> [2:OK] Mar 02 17:15:58.83: [ 2150]: <-- [7:ATS8=2\r] Mar 02 17:15:58.96: [ 2150]: --> [2:OK] Mar 02 17:15:58.96: [ 2150]: <-- [8:ATS7=60\r] Mar 02 17:15:59.10: [ 2150]: --> [2:OK] Mar 02 17:15:59.10: [ 2150]: <-- [12:AT&H1&I0&R2\r] Mar 02 17:15:59.24: [ 2150]: --> [2:OK] Mar 02 17:15:59.24: [ 2150]: <-- [11:ATS13=1&D2\r] Mar 02 17:15:59.37: [ 2150]: --> [2:OK] Mar 02 17:15:59.37: [ 2150]: <-- [6:AT&C1\r] Mar 02 17:15:59.51: [ 2150]: --> [2:OK] Mar 02 17:15:59.51: [ 2150]: <-- [14:AT+FCLASS=2.0\r] Mar 02 17:15:59.64: [ 2150]: --> [2:OK] Mar 02 17:15:59.64: [ 2150]: <-- [9:AT+FLO=2\r] Mar 02 17:15:59.78: [ 2150]: --> [2:OK] Mar 02 17:15:59.78: [ 2150]: <-- [9:AT+FPP=0\r] Mar 02 17:15:59.92: [ 2150]: --> [2:OK] Mar 02 17:15:59.92: [ 2150]: <-- [9:AT+FBO=0\r] Mar 02 17:16:00.06: [ 2150]: --> [2:OK] Mar 02 17:16:00.06: [ 2150]: <-- [10:AT+FCT=30\r] Mar 02 17:16:00.19: [ 2150]: --> [2:OK] Mar 02 17:16:00.19: [ 2150]: <-- [15:AT+FNR=1,1,1,0\r] Mar 02 17:16:00.33: [ 2150]: --> [2:OK] Mar 02 17:16:00.33: [ 2150]: <-- [9:AT+FIE=0\r] Mar 02 17:16:00.47: [ 2150]: --> [2:OK] Mar 02 17:16:00.47: [ 2150]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Mar 02 17:16:00.61: [ 2150]: --> [2:OK] Mar 02 17:16:00.61: [ 2150]: <-- [5:ATM0\r] Mar 02 17:16:00.75: [ 2150]: --> [2:OK] Mar 02 17:16:00.75: [ 2150]: MODEM input buffering enabled Mar 02 17:16:00.75: [ 2150]: <-- [14:AT+FCLASS=2.0\r] Mar 02 17:16:00.98: [ 2150]: --> [2:OK] Mar 02 17:16:00.98: [ 2150]: <-- [9:AT+FLO=2\r] Mar 02 17:16:01.22: [ 2150]: --> [2:OK] Mar 02 17:16:01.22: [ 2150]: <-- [9:AT+FPP=0\r] Mar 02 17:16:01.46: [ 2150]: --> [2:OK] Mar 02 17:16:01.46: [ 2150]: <-- [9:AT+FBO=0\r] Mar 02 17:16:01.70: [ 2150]: --> [2:OK] Mar 02 17:16:01.70: [ 2150]: <-- [10:AT+FCT=30\r] Mar 02 17:16:01.93: [ 2150]: --> [2:OK] Mar 02 17:16:01.93: [ 2150]: <-- [15:AT+FNR=1,1,1,0\r] Mar 02 17:16:02.17: [ 2150]: --> [2:OK] Mar 02 17:16:02.17: [ 2150]: <-- [9:AT+FIE=0\r] Mar 02 17:16:02.41: [ 2150]: --> [2:OK] Mar 02 17:16:02.41: [ 2150]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Mar 02 17:16:02.65: [ 2150]: --> [2:OK] Mar 02 17:16:02.65: [ 2150]: <-- [15:AT+FLI="COREN"\r] Mar 02 17:16:02.89: [ 2150]: --> [2:OK] Mar 02 17:16:02.91: [ 2150]: DIAL 0988369401 Mar 02 17:16:02.91: [ 2150]: <-- [15:ATDT0988369401\r] Mar 02 17:16:08.71: [ 2150]: --> [4:BUSY] Mar 02 17:16:08.71: [ 2150]: SEND FAILED: JOB 4 DEST 0988369401 ERR Busy signal detected Mar 02 17:16:08.71: [ 2150]: <-- [5:ATH0\r] Mar 02 17:16:08.94: [ 2150]: --> [2:OK] Mar 02 17:16:08.94: [ 2150]: MODEM set DTR OFF Mar 02 17:16:08.94: [ 2150]: SESSION END
Can anyone help me, please?
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Problems sending faxes
- From: Davide Cervella - BiElle srl
- Re: [hylafax-users] Problems sending faxes
- Prev by Date: Re: [hylafax-users] metamail
- Next by Date: [hylafax-users] T.30 T2 timeout, expected page not received
- Previous by thread: [hylafax-users] ANSWER: Ring detected without successful handshake and MODEM Command error
- Next by thread: Re: [hylafax-users] Problems sending faxes
- Index(es):
Project hosted by iFAX Solutions