[hylafax-users] Problems sending faxes with 1496E+

["Krzysztof Cieniuch" <kcieniuch@xxxxx>]

Hi,
For few days I'm struggling with zyxel modem 1496E+
I can't get it work properly 
It sometimes sends and sometimes fails to send fax
to the same fax machine. I have no clue what
causing this strange behavior.
I've tried everything Class 1,2,2.0
It seems that it best works with Class 2.0
but still I've got to many failed attempts to send fax.
Receiving works great till today no fax errors while receiving
and hope it stays that way :-)
OK and now one example.

Failed attempt
[CUT]
Mar 01 14:50:35.10: [ 2761]: NSF remote fax equipment: Canon 
Laser Class 9000 Series
Mar 01 14:50:35.10: [ 2761]: NSF remote station ID: "Some firm"
Mar 01 14:50:35.26: [ 2761]: --> [26:+FCI:      1111111 ]
Mar 01 14:50:35.26: [ 2761]: REMOTE CSI "11111111"
Mar 01 14:50:35.26: [ 2761]: --> [20:+FIS:1,5,0,2,1,1,0,3]
Mar 01 14:50:35.26: [ 2761]: --> [2:OK]
Mar 01 14:50:35.26: [ 2761]: REMOTE best rate 14400 bit/s
Mar 01 14:50:35.26: [ 2761]: REMOTE max page width 1728 pixels 
in 215 mm
Mar 01 14:50:35.26: [ 2761]: REMOTE max unlimited page length
Mar 01 14:50:35.26: [ 2761]: REMOTE best vres 7.7 line/mm
Mar 01 14:50:35.26: [ 2761]: REMOTE best format 2-D MR
Mar 01 14:50:35.26: [ 2761]: REMOTE supports T.30 Annex A, ECM
Mar 01 14:50:35.26: [ 2761]: REMOTE best 10 ms/scanline
Mar 01 14:50:35.26: [ 2761]: USE 14400 bit/s
Mar 01 14:50:35.27: [ 2761]: USE 10 ms/scanline
Mar 01 14:50:35.27: [ 2761]: SEND file "docq/doc137.ps;41"
Mar 01 14:50:35.27: [ 2761]: USE page width 1728 pixels in 215 
mm
Mar 01 14:50:35.27: [ 2761]: USE unlimited page length
Mar 01 14:50:35.27: [ 2761]: USE 7.7 line/mm
Mar 01 14:50:35.27: [ 2761]: USE 2-D MR
Mar 01 14:50:35.27: [ 2761]: <-- [23:AT+FIS=1,5,0,2,1,0,0,3\r]
Mar 01 14:50:35.39: [ 2761]: --> [2:OK]
Mar 01 14:50:35.39: [ 2761]: <-- [7:AT+FDT\r]
Mar 01 14:50:35.96: [ 2761]: --> [10:NO CARRIER]
Mar 01 14:50:35.96: [ 2761]: MODEM No carrier
Mar 01 14:50:35.96: [ 2761]: <-- [7:AT+FKS\r]
Mar 01 14:50:36.08: [ 2761]: --> [2:OK]
Mar 01 14:50:36.08: [ 2761]: <-- [5:ATH0\r]
Mar 01 14:50:36.39: [ 2761]: --> [2:OK]
Mar 01 14:50:36.39: [ 2761]: SESSION END

and completed
[CUT]
Mar 01 14:49:20.11: [ 2741]: NSF remote fax equipment: Canon 
Laser Class 9000 Series
Mar 01 14:49:20.11: [ 2741]: NSF remote station ID: "Some Firm"
Mar 01 14:49:20.27: [ 2741]: --> [26:+FCI:         111111111 ]
Mar 01 14:49:20.27: [ 2741]: REMOTE CSI "111111111"
Mar 01 14:49:20.27: [ 2741]: --> [20:+FIS:1,5,0,2,1,1,0,3]
Mar 01 14:49:20.27: [ 2741]: --> [2:OK]
Mar 01 14:49:20.27: [ 2741]: REMOTE best rate 14400 bit/s
Mar 01 14:49:20.27: [ 2741]: REMOTE max page width 1728 pixels 
in 215 mm
Mar 01 14:49:20.27: [ 2741]: REMOTE max unlimited page length
Mar 01 14:49:20.27: [ 2741]: REMOTE best vres 7.7 line/mm
Mar 01 14:49:20.27: [ 2741]: REMOTE best format 2-D MR
Mar 01 14:49:20.27: [ 2741]: REMOTE supports T.30 Annex A, ECM
Mar 01 14:49:20.27: [ 2741]: REMOTE best 10 ms/scanline
Mar 01 14:49:20.27: [ 2741]: USE 14400 bit/s
Mar 01 14:49:20.28: [ 2741]: USE 10 ms/scanline
Mar 01 14:49:20.28: [ 2741]: SEND file "docq/doc136.ps;41"
Mar 01 14:49:20.28: [ 2741]: USE page width 1728 pixels in 215 
mm
Mar 01 14:49:20.28: [ 2741]: USE unlimited page length
Mar 01 14:49:20.28: [ 2741]: USE 7.7 line/mm
Mar 01 14:49:20.28: [ 2741]: USE 2-D MR
Mar 01 14:49:20.28: [ 2741]: <-- [23:AT+FIS=1,5,0,2,1,0,0,3\r]
Mar 01 14:49:20.40: [ 2741]: --> [2:OK]
Mar 01 14:49:20.40: [ 2741]: <-- [7:AT+FDT\r]
Mar 01 14:49:27.24: [ 2741]: --> [20:+FCS:1,5,0,2,1,0,0,3]
Mar 01 14:49:27.24: [ 2741]: --> [7:CONNECT]
Mar 01 14:49:27.24: [ 2741]: SEND begin page
Mar 01 14:49:27.25: [ 2741]: <-- data [1026]
Mar 01 14:49:27.25: [ 2741]: <-- data [735]
Mar 01 14:49:27.25: [ 2741]: SENT 1756 bytes of data
Mar 01 14:49:27.25: [ 2741]: SEND end page
Mar 01 14:49:27.25: [ 2741]: SEND send EOP (no more pages or 
documents)
Mar 01 14:49:27.25: [ 2741]: <-- data [2]
Mar 01 14:49:34.65: [ 2741]: --> [7:+FHS:00]
Mar 01 14:49:34.65: [ 2741]: REMOTE HANGUP: Normal and proper 
end of connection (code 0)
Mar 01 14:49:34.65: [ 2741]: SEND recv MCF (message 
confirmation)
Mar 01 14:49:34.65: [ 2741]: SEND FAX (00000334): FROM 
bla@xxxxxxx TO 1111111 (page 1 of 1 sent in 0:14)
Mar 01 14:49:34.66: [ 2741]: SEND FAX (00000334): FROM 
bla@xxxxxxx TO 1111111 (docq/doc136.ps;41 sent in 0:14)
Mar 01 14:49:34.66: [ 2741]: <-- [5:ATH0\r]
Mar 01 14:49:34.66: [ 2741]: --> [2:OK]
Mar 01 14:49:34.66: [ 2741]: SESSION END

same problem to different location

[CUT]
Mar 01 14:47:12.78: [ 2720]: NSF remote fax equipment: Panasonic
Mar 01 14:47:12.78: [ 2720]: NSF remote station ID: "bla bla"
Mar 01 14:47:12.78: [ 2720]: --> [26:+FCI:       111111111 ]
Mar 01 14:47:12.78: [ 2720]: REMOTE CSI "111111111"
Mar 01 14:47:12.78: [ 2720]: --> [20:+FIS:1,3,0,2,1,1,0,0]
Mar 01 14:47:12.78: [ 2720]: --> [2:OK]
Mar 01 14:47:12.78: [ 2720]: REMOTE best rate 9600 bit/s
Mar 01 14:47:12.78: [ 2720]: REMOTE max page width 1728 pixels 
in 215 mm
Mar 01 14:47:12.78: [ 2720]: REMOTE max unlimited page length
Mar 01 14:47:12.79: [ 2720]: REMOTE best vres 7.7 line/mm
Mar 01 14:47:12.79: [ 2720]: REMOTE best format 2-D MR
Mar 01 14:47:12.79: [ 2720]: REMOTE supports T.30 Annex A, ECM
Mar 01 14:47:12.79: [ 2720]: REMOTE best 0 ms/scanline
Mar 01 14:47:12.79: [ 2720]: USE 9600 bit/s
Mar 01 14:47:12.79: [ 2720]: USE 0 ms/scanline
Mar 01 14:47:12.79: [ 2720]: SEND file "docq/doc135.ps;01"
Mar 01 14:47:12.79: [ 2720]: USE page width 1728 pixels in 215 
mm
Mar 01 14:47:12.79: [ 2720]: USE unlimited page length
Mar 01 14:47:12.79: [ 2720]: USE 7.7 line/mm
Mar 01 14:47:12.79: [ 2720]: USE 1-D MR
Mar 01 14:47:12.79: [ 2720]: <-- [23:AT+FIS=1,3,0,2,0,0,0,0\r]
Mar 01 14:47:12.91: [ 2720]: --> [2:OK]
Mar 01 14:47:12.91: [ 2720]: <-- [7:AT+FDT\r]
Mar 01 14:47:13.48: [ 2720]: --> [10:NO CARRIER]
Mar 01 14:47:13.48: [ 2720]: MODEM No carrier
Mar 01 14:47:13.48: [ 2720]: <-- [7:AT+FKS\r]
Mar 01 14:47:13.60: [ 2720]: --> [2:OK]
Mar 01 14:47:13.60: [ 2720]: <-- [5:ATH0\r]
Mar 01 14:47:13.91: [ 2720]: --> [2:OK]
Mar 01 14:47:13.91: [ 2720]: SESSION END


I've searched all FAQs mailing lists etc.
This is my config file

CountryCode:            48
AreaCode:               56
FAXNumber:              "+48 56 1111111111"
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0644
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Bla bla"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P z %%T"
MaxRecvPages:           100
UUCPLockTimeout:        10
MaxConsecutiveBadLines: 100
PercentGoodLines:       50

RTNHandlingMethod:      Giveup

ModemType:              Class2.0 
ModemRate:              19200
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&H0
ModemHardFlowCmd:       AT&H3
ModemSoftFlowCmd:       AT&H4
ModemSetupDTRCmd:       AT&D2
ModemSetupDCDCmd:       AT&C1

ModemSetupAACmd:        AT+FAA=0 
ModemResetCmds:         AT&B1&N0&S0*F0S18=3S38.3=1S39=0
ModemDialCmd:           ATDT%s
NoCarrierRetrys:        3  
ModemSetVolumeCmd:      "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
Class2DCCQueryCmd:      "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),
(0-7)"
Class2PHCTOCmd:         AT+FPHCTO=FF


Different modem has no problems sending faxes to this locations
but I've invested much time (and money:)) to zyxel 
so I'm very determined to get it work right.

thanks in advance for 
any info/help/hint/suggestion/tip/whatever :-)

Chris

----------------------------------------------------
ZOBACZ JAK BYŁO! "PASJA" MELA GIBSONA OD 5 MARCA!
http://klik.wp.pl/?adr=http%3A%2F%2Ffilm.wp.pl%2Fp%2Ffilm.php%3Fid%3D8441&sid=126



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*