[hylafax-users] Fax gets resent three times

[jburley-spam@xxxxxxxx]

Hello all,
        I'm having a problem where a fax is being sent to a person three times.

Sounded like it's thinking it's failing on the send, and retries... and each
time it's actually sending the fax.

Here's an output from one (I removed the fax number):

Jan 19 12:13:07.39: [30138]: SESSION BEGIN 00019651 1972???????
Jan 19 12:13:07.39: [30138]: HylaFAX (tm) Version 4.1.7
Jan 19 12:13:07.39: [30138]: SEND FAX: JOB 10735 DEST 1972??????? COMMID 000196
5
1 DEVICE '/dev/cuaa4'
Jan 19 12:13:07.39: [30138]: DELAY 75 ms
Jan 19 12:13:07.47: [30138]: DELAY 2600 ms
Jan 19 12:13:11.09: [30138]: DELAY 10 ms
Jan 19 12:13:11.11: [30138]: <-- [4:ATZ\r]
Jan 19 12:13:11.12: [30138]: --> [2:OK]
Jan 19 12:13:11.12: [30138]: DELAY 3000 ms
Jan 19 12:13:14.13: [30138]: <-- [5:ATE0\r]
Jan 19 12:13:14.14: [30138]: --> [4:ATE0]
Jan 19 12:13:14.14: [30138]: --> [2:OK]
Jan 19 12:13:14.14: [30138]: <-- [5:ATV1\r]
Jan 19 12:13:14.15: [30138]: --> [2:OK]
Jan 19 12:13:14.15: [30138]: <-- [5:ATQ0\r]
Jan 19 12:13:14.16: [30138]: --> [2:OK]
Jan 19 12:13:14.16: [30138]: <-- [7:ATS0=0\r]
Jan 19 12:13:14.17: [30138]: --> [2:OK]
Jan 19 12:13:14.17: [30138]: <-- [7:ATS8=2\r]
Jan 19 12:13:14.18: [30138]: --> [2:OK]
Jan 19 12:13:14.18: [30138]: <-- [8:ATS7=60\r]
Jan 19 12:13:14.19: [30138]: --> [2:OK]
Jan 19 12:13:14.19: [30138]: <-- [6:AT&K3\r]
Jan 19 12:13:14.20: [30138]: --> [2:OK]
Jan 19 12:13:14.20: [30138]: <-- [6:AT&D2\r]
Jan 19 12:13:14.21: [30138]: --> [2:OK]
Jan 19 12:13:14.21: [30138]: <-- [6:AT&C1\r]
Jan 19 12:13:14.22: [30138]: --> [2:OK]
Jan 19 12:13:14.22: [30138]: <-- [12:AT+FCLASS=1\r]
Jan 19 12:13:14.23: [30138]: --> [2:OK]
Jan 19 12:13:14.23: [30138]: <-- [5:ATM0\r]
Jan 19 12:13:14.24: [30138]: --> [2:OK]
Jan 19 12:13:14.24: [30138]: <-- [12:AT+FCLASS=1\r]
Jan 19 12:13:14.35: [30138]: --> [2:OK]
Jan 19 12:13:14.35: [30138]: DIAL 1972???????
Jan 19 12:13:14.35: [30138]: <-- [16:ATDT1972???????\r]
Jan 19 12:13:39.22: [30138]: --> [7:CONNECT]
Jan 19 12:13:40.97: [30138]: --> [2:OK]
Jan 19 12:13:40.97: [30138]: REMOTE NSF "00 00 31 00 CE B8 C4 80 11 85 0D DD 00
00 DD DD 00 00 DD DD 00 00 00 00 00 00 00 00 ED 22 B0 00 00 A4 00 36"
Jan 19 12:13:40.97: [30138]: NSF remote fax equipment: Sharp/Olivetti
Jan 19 12:13:40.97: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:13:40.98: [30138]: --> [7:CONNECT]
Jan 19 12:13:41.69: [30138]: --> [2:OK]
Jan 19 12:13:41.69: [30138]: REMOTE CSI "972 ??????? 4155"
Jan 19 12:13:41.69: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:13:41.70: [30138]: --> [7:CONNECT]
Jan 19 12:13:42.07: [30138]: --> [2:OK]
Jan 19 12:13:42.07: [30138]: REMOTE best rate 9600 bit/s
Jan 19 12:13:42.07: [30138]: REMOTE max page width 1728 pixels in 215 mm
Jan 19 12:13:42.07: [30138]: REMOTE max unlimited page length
Jan 19 12:13:42.07: [30138]: REMOTE best vres 7.7 line/mm
Jan 19 12:13:42.07: [30138]: REMOTE best format 2-D MMR
Jan 19 12:13:42.07: [30138]: REMOTE supports T.30 Annex A, ECM
Jan 19 12:13:42.07: [30138]: REMOTE best 20 ms, 10 ms/scanline
Jan 19 12:13:42.07: [30138]: USE 9600 bit/s
Jan 19 12:13:42.07: [30138]: USE 20 ms, 10 ms/scanline
Jan 19 12:13:42.07: [30138]: SEND file "docq/doc10748.ps;70"
Jan 19 12:13:42.07: [30138]: USE page width 1728 pixels in 215 mm
Jan 19 12:13:42.07: [30138]: USE unlimited page length
Jan 19 12:13:42.07: [30138]: USE 3.85 line/mm
Jan 19 12:13:42.07: [30138]: USE 2-D MR
Jan 19 12:13:42.07: [30138]: SEND training at v.29 9600 bit/s
Jan 19 12:13:42.07: [30138]: <-- [9:AT+FTH=3\r]
Jan 19 12:13:42.26: [30138]: --> [7:CONNECT]
Jan 19 12:13:42.26: [30138]: <-- data [23]
Jan 19 12:13:42.26: [30138]: <-- data [2]
Jan 19 12:13:42.27: [30138]: --> [7:CONNECT]
Jan 19 12:13:42.27: [30138]: <-- data [6]
Jan 19 12:13:42.27: [30138]: <-- data [2]
Jan 19 12:13:44.23: [30138]: --> [2:OK]
Jan 19 12:13:44.23: [30138]: <-- [9:AT+FTS=7\r]
Jan 19 12:13:44.31: [30138]: --> [2:OK]
Jan 19 12:13:44.31: [30138]: <-- [10:AT+FTM=96\r]
Jan 19 12:13:44.63: [30138]: --> [7:CONNECT]
Jan 19 12:13:44.63: [30138]: <-- data [1024]
Jan 19 12:13:44.63: [30138]: <-- data [776]
Jan 19 12:13:44.63: [30138]: <-- data [2]
Jan 19 12:13:46.16: [30138]: --> [2:OK]
Jan 19 12:13:46.16: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:13:46.77: [30138]: --> [7:CONNECT]
Jan 19 12:13:47.60: [30138]: --> [2:OK]
Jan 19 12:13:47.60: [30138]: TRAINING succeeded
Jan 19 12:13:47.60: [30138]: DELAY 75 ms
Jan 19 12:13:47.68: [30138]: <-- [10:AT+FTM=96\r]
Jan 19 12:13:48.03: [30138]: --> [7:CONNECT]
Jan 19 12:13:48.03: [30138]: SEND begin page
Jan 19 12:13:48.03: [30138]: <-- data [1031]
Jan 19 12:13:48.03: [30138]: <-- data [1024]
Jan 19 12:13:48.03: [30138]: <-- data [1026]
Jan 19 12:13:48.75: [30138]: <-- data [1028]
Jan 19 12:13:48.75: [30138]: <-- data [1031]
Jan 19 12:13:49.62: [30138]: <-- data [1027]
Jan 19 12:13:49.62: [30138]: <-- data [1031]
Jan 19 12:13:50.48: [30138]: <-- data [1029]
Jan 19 12:13:50.48: [30138]: <-- data [1032]
Jan 19 12:13:52.05: [30138]: <-- data [1032]
Jan 19 12:13:52.05: [30138]: <-- data [1029]
Jan 19 12:13:53.63: [30138]: <-- data [1035]
Jan 19 12:13:53.63: [30138]: <-- data [1031]
Jan 19 12:13:55.92: [30138]: <-- data [1033]
Jan 19 12:13:55.92: [30138]: <-- data [1032]
Jan 19 12:13:57.50: [30138]: <-- data [1043]
Jan 19 12:13:57.50: [30138]: <-- data [1028]
Jan 19 12:13:59.07: [30138]: <-- data [1024]
Jan 19 12:13:59.07: [30138]: <-- data [1024]
Jan 19 12:14:00.64: [30138]: <-- data [1024]
Jan 19 12:14:00.64: [30138]: <-- data [1024]
Jan 19 12:14:02.22: [30138]: <-- data [1024]
Jan 19 12:14:02.22: [30138]: <-- data [1024]
Jan 19 12:14:03.79: [30138]: <-- data [1024]
Jan 19 12:14:03.79: [30138]: <-- data [1024]
Jan 19 12:14:06.08: [30138]: <-- data [258]
Jan 19 12:14:06.08: [30138]: SENT 25858 bytes of data
Jan 19 12:14:06.08: [30138]: <-- data [1024]
Jan 19 12:14:07.67: [30138]: <-- data [1024]
Jan 19 12:14:07.67: [30138]: <-- data [1024]
Jan 19 12:14:09.25: [30138]: <-- data [1024]
Jan 19 12:14:09.25: [30138]: <-- data [1024]
Jan 19 12:14:10.82: [30138]: <-- data [184]
Jan 19 12:14:10.82: [30138]: SENT 5304 bytes of data
Jan 19 12:14:10.82: [30138]: SEND 2D RTC
Jan 19 12:14:10.82: [30138]: <-- data [30]
Jan 19 12:14:10.82: [30138]: <-- data [2]
Jan 19 12:14:10.82: [30138]: SEND end page
Jan 19 12:14:14.05: [30138]: --> [30:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^
Q^S^Q^S^Q^S^Q^S^Q]
Jan 19 12:14:14.05: [30138]: --> [2:OK]
Jan 19 12:14:14.05: [30138]: <-- [9:AT+FTS=7\r]
Jan 19 12:14:14.13: [30138]: --> [2:OK]
Jan 19 12:14:14.13: [30138]: SEND send MPS (more pages, same document)
Jan 19 12:14:14.13: [30138]: <-- [9:AT+FTH=3\r]
Jan 19 12:14:14.28: [30138]: --> [7:CONNECT]
Jan 19 12:14:14.28: [30138]: <-- data [3]
Jan 19 12:14:14.28: [30138]: <-- data [2]
Jan 19 12:14:15.46: [30138]: --> [2:OK]
Jan 19 12:14:15.46: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:14:15.58: [30138]: --> [10:NO CARRIER]
Jan 19 12:14:15.58: [30138]: MODEM No carrier
Jan 19 12:14:15.58: [30138]: SEND send MPS (more pages, same document)
Jan 19 12:14:15.58: [30138]: <-- [9:AT+FTH=3\r]
Jan 19 12:14:15.77: [30138]: --> [7:CONNECT]
Jan 19 12:14:15.77: [30138]: <-- data [3]
Jan 19 12:14:15.77: [30138]: <-- data [2]
Jan 19 12:14:16.95: [30138]: --> [2:OK]
Jan 19 12:14:16.95: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:14:17.18: [30138]: --> [10:NO CARRIER]
Jan 19 12:14:17.18: [30138]: MODEM No carrier
Jan 19 12:14:17.18: [30138]: SEND send MPS (more pages, same document)
Jan 19 12:14:17.18: [30138]: <-- [9:AT+FTH=3\r]
Jan 19 12:14:17.37: [30138]: --> [7:CONNECT]
Jan 19 12:14:17.37: [30138]: <-- data [3]
Jan 19 12:14:17.37: [30138]: <-- data [2]
Jan 19 12:14:18.55: [30138]: --> [2:OK]
Jan 19 12:14:18.55: [30138]: <-- [9:AT+FRH=3\r]
Jan 19 12:14:18.78: [30138]: --> [10:NO CARRIER]
Jan 19 12:14:18.78: [30138]: MODEM No carrier
Jan 19 12:14:18.78: [30138]: No response to MPS or EOP repeated 3 tries
Jan 19 12:14:18.78: [30138]: <-- [9:AT+FTH=3\r]
Jan 19 12:14:18.98: [30138]: --> [7:CONNECT]
Jan 19 12:14:18.98: [30138]: <-- data [3]
Jan 19 12:14:18.98: [30138]: <-- data [2]
Jan 19 12:14:20.15: [30138]: --> [2:OK]
Jan 19 12:14:20.15: [30138]: <-- [5:ATH0\r]
Jan 19 12:14:25.15: [30138]: MODEM <Timeout>
Jan 19 12:14:25.15: [30138]: SESSION END


Any ideas for me?

.josh


 Josh Burley
 jburley-spam@xxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*