Re: [hylafax-users] CID / DID problem - update to solution

["Impact" <impactserv@xxxxxxxxxxx>]

Lee, 
thanks for the info.  Got me started in the right direction.  BTW, I am
running the latest binary 4.1.8-1rh8

Solved this problem. 
But, turns out that the RingTimeOut was not needed to be any different.

I needed to set RingsBeforeAnswer to "2" since DID comes between 1st and
2nd ring.

Of course this caused extra time before the call was picked up.  So I
was able to shave about 6 seconds off of the answer time by setting
CIDNumberAnswerLength to the correct number of digits sent after wink by
telco.  This way, I got one ring, then the CID info was spit out by the
modem and trapped by hylafax.  With the correct number of digits
trapped, off hook to answer the phone and no waiting for second ring.

Can you point me to a how-to to apply a "CVS HEAD"?

Tricks on getting 2D-MMR going?  Using modems in class 2.0


> Original Post
> ---------
> My modem is reporting the DID number but hylafax is not picking it up.
> attached is the tty config file defining CIDnumber. attached is the
> servertrace showing the modem reporting the DID number
> ("NDID"). but faxrcvd is called without the CIDnumber.?
> 
> also, note in the servertracing that the modem seems to get setup w/
> the same AT commands at least two times.  ???

This is fixed in CVS HEAD.

> also, the modem report that it can do 2D-MMR but the fax is always
> sent
> in
> 2D-MR .  tricks to activate MMR sends?

What version of HylaFAX are you using?

> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [4:RING]
> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [12:NDID=8423721]
> Dec 12 07:57:18 FX1 FaxGetty[9992]: --> [11:NMBR=<NONE>]
> Dec 12 07:57:24 FX1 FaxGetty[9992]: MODEM TIMEOUT: reading line from
> modem
> Dec 12 07:57:24 FX1 FaxGetty[9992]: <-- [5:ATH0\r]
> Dec 12 07:57:25 FX1 FaxGetty[9992]: --> [2:OK]

And that causes you to lose CID/DID information.  You need to increase 
RingTimeout (see 'man hylafax-config').

Lee.




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*