HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] Errors on DeVolo Modem (Microlink)
Hi All,
I'm having troubles in fax reception with a Devolo/Microlink Modem
configured using the Elsa-microlink template.
I received the following error which is absolutely new to me.
Do you have any idea on what could it mean?
The bad thing here is that the sender's machine reported
a succesful transmission while it was not!!!
Thank you very much.
Bye.
The full document was not received because:
Procedure interrupt received, job terminated
---- Transcript of session follows ----
Nov 28 15:02:02.01: [ 8621]: SESSION BEGIN 00067104 390434621766
Nov 28 15:02:02.01: [ 8621]: HylaFAX (tm) Version 4.1.7
Nov 28 15:02:02.01: [ 8621]: <-- [4:ATA\r]
Nov 28 15:02:08.02: [ 8621]: --> [74:+FHT: FF 03 40 20 20 20 20 20 36 36 37 31 32 36 20 34 33 34 30 20 39 33 2B]
Nov 28 15:02:08.02: [ 8621]: --> [26:+FHT: FF 13 80 00 6E FA 00]
Nov 28 15:02:13.30: [ 8621]: --> [74:+FHT: FF 03 40 20 20 20 20 20 36 36 37 31 32 36 20 34 33 34 30 20 39 33 2B]
Nov 28 15:02:13.30: [ 8621]: --> [26:+FHT: FF 13 80 00 6E FA 00]
Nov 28 15:02:16.48: [ 8621]: --> [4:+FCO]
Nov 28 15:02:16.48: [ 8621]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyM0'
Nov 28 15:02:16.48: [ 8621]: STATE CHANGE: ANSWERING -> RECEIVING
Nov 28 15:02:16.48: [ 8621]: MODEM input buffering enabled
Nov 28 15:02:16.48: [ 8621]: RECV FAX: begin
Nov 28 15:02:18.01: [ 8621]: --> [74:+FHR: FF 03 43 20 20 20 20 20 20 20 20 20 20 20 20 20 37 34 32 36 38 35 32]
Nov 28 15:02:18.32: [ 8621]: --> [26:+FHR: FF 13 83 00 06 F8 00]
Nov 28 15:02:20.59: [ 8621]: --> [27:+FTI:"1234567 "]
Nov 28 15:02:20.59: [ 8621]: REMOTE TSI "1234567"
Nov 28 15:02:20.59: [ 8621]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Nov 28 15:02:20.59: [ 8621]: REMOTE wants 9600 bit/s
Nov 28 15:02:20.59: [ 8621]: REMOTE wants page width 1728 pixels in 215 mm
Nov 28 15:02:20.59: [ 8621]: REMOTE wants unlimited page length
Nov 28 15:02:20.59: [ 8621]: REMOTE wants 3.85 line/mm
Nov 28 15:02:20.59: [ 8621]: REMOTE wants 1-D MR
Nov 28 15:02:20.59: [ 8621]: --> [2:OK]
Nov 28 15:02:20.59: [ 8621]: <-- [7:AT+FDR\r]
Nov 28 15:02:20.73: [ 8621]: --> [14:+FHT: FF 13 84]
Nov 28 15:02:22.79: [ 8621]: --> [7:CONNECT]
Nov 28 15:02:22.79: [ 8621]: RECV: begin page
Nov 28 15:02:22.79: [ 8621]: RECV: send trigger 022
Nov 28 15:02:45.19: [ 8621]: RECV/CQ: Bad 1D pixel count, row 1208, got 0, expected 1728
Nov 28 15:02:45.19: [ 8621]: RECV/CQ: Bad 1D pixel count, row 1209, got 0, expected 1728
Nov 28 15:02:45.19: [ 8621]: RECV/CQ: Bad 1D pixel count, row 1210, got 0, expected 1728
Nov 28 15:02:45.19: [ 8621]: RECV/CQ: Bad 1D pixel count, row 1211, got 0, expected 1728
Nov 28 15:02:45.19: [ 8621]: RECV/CQ: Bad 1D pixel count, row 1212, got 0, expected 1728
Nov 28 15:02:45.19: [ 8621]: RECV: 23047 bytes of data, 1213 total lines
Nov 28 15:02:45.62: [ 8621]: --> [16:+FPS:1,4BE,0,0,0]
Nov 28 15:02:47.07: [ 8621]: --> [14:+FHR: FF 13 3F]
Nov 28 15:02:47.07: [ 8621]: --> [6:+FET:6]
Nov 28 15:02:47.07: [ 8621]: RECV recv PRI-EOP (no more pages after interrupt)
Nov 28 15:02:47.07: [ 8621]: --> [2:OK]
Nov 28 15:02:47.07: [ 8621]: RECV send MCF (message confirmation)
Nov 28 15:02:47.07: [ 8621]: RECV FAX (00067104): from 123456, page 1 in 0:27, INF, 3.85 line/mm, 1-D MR, 9600 bit/s
Nov 28 15:02:47.07: [ 8621]: RECV FAX (00067104): recvq/fax33967.tif from 1234567, route to <unspecified>, 1 pages in 0:31
Nov 28 15:02:47.07: [ 8621]: RECV FAX: Procedure interrupt received, job terminated
Nov 28 15:02:47.07: [ 8621]: <-- [7:AT+FKS\r]
Nov 28 15:02:47.21: [ 8621]: --> [14:+FHT: FF 13 FA]
Nov 28 15:02:48.55: [ 8621]: --> [7:+FHS:02]
Nov 28 15:02:48.55: [ 8621]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2)
Nov 28 15:02:48.55: [ 8621]: --> [2:OK]
Nov 28 15:02:48.55: [ 8621]: RECV FAX (00067104): session with 1234567 terminated abnormally: Procedure interrupt received, job terminated
Nov 28 15:02:48.55: [ 8621]: RECV FAX: bin/faxrcvd "recvq/fax33967.tif" "ttyM0" "00067104" "Procedure interrupt received, job terminated" "" ""
--
Andrea Nicolini
andrea@xxxxxxxxx
http://www.teamsw.it
Team Software S.r.l.
Via Campagna 30
Cognento MO
Tel 059.343790
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*