Re: [hylafax-users] AW: error: No local dial tone

[Milen Dimitrov <milend@xxxxxxxxx>]

Frank,
Thank you for the response!

The modem is Multitech MT2834ZDXb and in config.ttyS0 I have the 
following command:
ModemDialCmd:                ATX3DT,%s               

Do I need to restart hylafax after I make a change in config.ttyS0 ?

Milen

Jahn, Frank wrote:

> you should add X3 to the modemresetcmds or the dialstring (ATX3dt%s).
> This way the modem won't look for a dial tone.
>
> MILEN wrote:
> 	In the xferfaxlog almost for every fax job I have messages
> 	"No local dial tone" and "No carrier detected".
> 	But usually after 2 or 3 retries fax is successfuly transmited.
>
> 	What can be the cause for such error mesage to appear?
> 	Anyone having the same problem?
>
> 	Thanks for the help in advance!
> 	Milen
>
>
>  




____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*