 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Do I need to configure anything special to get 2D-MMR+ECM in Class 1 on CVS?
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Do I need to configure anything special to get 2D-MMR+ECM in Class 1 on CVS?
- From: An Intrepid HylaFax User <hylafax@xxxxxxxxx>
- Date: Fri, 17 Oct 2003 00:34:19 -0700
What a bummer. I just downloaded the CVS version of HFAX.... upgraded the binaries on my home faxserver, and did a test fax from my Multi-Tech ZBA (running in Class 2.1) box running on a 4.1.7 installation. Not only did I *NOT* see ECM, but the negotiated compression was 1D-MH!!!! With HylaFAX 4.1.5 on the receiving end (what was running before), at least it was managing 2D-MR. Do I need to sprinkle magic into the config.modem file? My libtiff's on both boxes are 3.5.7 with LZW compression packs. According to the logs, the SENDER (Multi-tech ZBA box) didn't want to send 2DMMR!!! Which is really odd, because I have tons of outgoing logs from this machine which have been in 2d-MR and 2d-mmr! And yes, I removed the old info/ file on the sender's side, though even THAT said 2d-MR was indicated as supported. I killed both sides' faxgetty's and faxq's to ensure no stale configs, etc, etc. Did I pick a bad night to download the CVS? Or did I miss something that's probably in a FAQ somewhere? Judging by this exchange, I was better off with 4.1.5 on the receiving side! =R= Receiving Call Log: 1:43:28.15: SESSION BEGIN 00001775 1xxxxxxxxxxx 1:43:28.15: HylaFAX (tm) Version 4.1.6 1:43:28.15: <-- [14:AT+FCLASS=1;A\r] 1:43:34.18: --> [7:CONNECT] 1:43:34.18: ANSWER: FAX CONNECTION DEVICE '/dev/modem' 1:43:34.18: RECV FAX: begin 1:43:34.19: <-- data [32] 1:43:34.19: <-- data [2] 1:43:36.10: --> [7:CONNECT] 1:43:36.10: <-- data [23] 1:43:36.10: <-- data [2] 1:43:36.93: --> [7:CONNECT] 1:43:36.93: <-- data [10] 1:43:36.93: <-- data [2] 1:43:37.50: --> [2:OK] 1:43:37.50: <-- [9:AT+FRH=3\r] 1:43:37.98: --> [7:CONNECT] 1:43:39.49: --> [2:OK] 1:43:39.49: REMOTE TSI "DebtDomain" 1:43:39.49: <-- [9:AT+FRH=3\r] 1:43:39.50: --> [7:CONNECT] 1:43:39.81: --> [2:OK] 1:43:39.81: REMOTE wants 14400 bit/s 1:43:39.81: REMOTE wants A4 page width (215 mm) 1:43:39.81: REMOTE wants unlimited page length 1:43:39.81: REMOTE wants 3.85 line/mm 1:43:39.81: REMOTE wants 1-D MH 1:43:39.81: RECV training at v.17 14400 bit/s 1:43:39.81: <-- [11:AT+FRM=145\r] 1:43:41.51: --> [7:CONNECT] 1:43:43.05: RECV: TCF 2739 bytes, 0% non-zero, 2715 zero-run 1:43:43.06: --> [10:NO CARRIER] 1:43:43.06: DELAY 75 ms 1:43:43.14: TRAINING succeeded 1:43:43.14: <-- [9:AT+FTH=3\r] 1:43:43.19: --> [7:CONNECT] 1:43:43.19: <-- data [3] 1:43:43.19: <-- data [2] 1:43:44.50: --> [2:OK] 1:43:44.50: <-- [11:AT+FRM=146\r] 1:43:45.00: --> [7:CONNECT] 1:43:45.00: RECV: begin page 1:43:49.12: RECV: 6929 bytes of data, 498 total lines 1:43:49.12: RECV: end page 1:43:49.12: --> [10:NO CARRIER] 1:43:49.12: <-- [9:AT+FRH=3\r] 1:43:49.54: --> [7:CONNECT] 1:43:50.40: --> [2:OK] 1:43:50.40: RECV recv MPS (more pages, same document) 1:43:50.40: <-- [9:AT+FRS=7\r] 1:43:50.62: --> [2:OK] 1:43:50.62: <-- [9:AT+FTH=3\r] 1:43:50.77: --> [7:CONNECT] 1:43:50.77: RECV send MCF (message confirmation) 1:43:50.77: RECV FAX (00001775): from DebtDomain, page 1 in 0:07, INF, 3.85 line/mm, 1-D MH, 14400 bit/s 1:43:50.77: <-- data [3] 1:43:50.77: <-- data [2] 1:43:52.08: --> [2:OK] 1:43:52.08: <-- [11:AT+FRM=146\r] 1:43:52.70: --> [7:CONNECT] 1:43:52.70: RECV: begin page 1:43:59.91: RECV: 12482 bytes of data, 357 total lines 1:43:59.91: RECV: end page 1:43:59.91: --> [10:NO CARRIER] 1:43:59.91: <-- [9:AT+FRH=3\r] 1:44:00.36: --> [7:CONNECT] 1:44:01.17: --> [2:OK] 1:44:01.17: RECV recv EOP (no more pages or documents) 1:44:01.17: <-- [9:AT+FRS=7\r] 1:44:01.39: --> [2:OK] 1:44:01.39: <-- [9:AT+FTH=3\r] 1:44:01.54: --> [7:CONNECT] 1:44:01.54: <-- data [3] 1:44:01.54: <-- data [2] 1:44:02.85: --> [2:OK] 1:44:02.85: RECV send MCF (message confirmation) 1:44:02.85: RECV FAX (00001775): from DebtDomain, page 2 in 0:12, INF, 3.85 line/mm, 1-D MH, 14400 bit/s 1:44:02.85: RECV FAX (00001775): recvq/fax01624.tif from DebtDomain, route to <unspecified>, 2 pages in 0:28 1:44:02.85: <-- [9:AT+FRH=3\r] 1:44:03.27: --> [7:CONNECT] 1:44:04.14: --> [2:OK] 1:44:04.14: RECV FAX: bin/faxrcvd "recvq/fax01624.tif" "modem" "00001775" "" "" "" 1:44:04.40: RECV FAX: end 1:44:04.40: SESSION END ================================================ Modem Model: V3.210-03-V90_2M_DLS SUPRAEXPRESS 56E V.90 SUP2730 56000 ================================================ RECEIVING MODEM CONFIG: ModemType: Class1 # use this to supply a hint ModemRate: 38400 # max rate for DCE-DTE communication ModemFlowControl: rtscts # XON/XOFF flow control assumed ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier ModemAnswerCmd: "AT+FCLASS=1;A" ModemNoFlowCmd: AT&K0 # disable flow control cmd ModemHardFlowCmd: AT&K3 # hardware flow control cmd ModemSoftFlowCmd: AT&K4 # software flow control cmd ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer # # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH. # Note that we both turn the speaker on/off and set volume. # ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1" ModemEchoOffCmd: ATE0 # disable command echo ModemVerboseResultsCmd: ATV1 # enable verbose command results # Class 1 stuff Class1Cmd: AT+FCLASS=1 # command to enter class 1 Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before Class1MsgRecvHackCmd: "" # command to avoid +FCERROR before image Class1TCFResponseDelay: 75 # 75ms delay between recv TCF Class1SendMsgDelay: 75 # 75ms delay after training Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and Class1TrainingRecovery: 1500 # 1.5sec delay after training Class1RecvAbortOK: 200 # wait 200ms for abort response Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration RecvDataFormat: "2-D MMR" PercentGoodLines: 0 # disable copy quality checking ================================================ SENDING MODEM: Multi-Tech V.92 ZBA Rev 1.28C ================================================ SENDING CALL LOG: Oct 17 04:42:32.05: [ 2129]: SESSION BEGIN 00000355 1xxxxxxxxxxx Oct 17 04:42:32.05: [ 2129]: HylaFAX (tm) Version 4.1.7 Oct 17 04:42:32.05: [ 2129]: SEND FAX: JOB 167 DEST +1xxxxxxxxxxx COMMID 00000355 DEVICE '/dev/modem' Oct 17 04:42:32.05: [ 2129]: MODEM set DTR OFF Oct 17 04:42:32.05: [ 2129]: DELAY 75 ms Oct 17 04:42:32.13: [ 2129]: MODEM set DTR ON Oct 17 04:42:32.13: [ 2129]: DELAY 2600 ms Oct 17 04:42:35.74: [ 2129]: MODEM set baud rate: 57600 baud, input flow RTS/CTS, output flow RTS/CTS Oct 17 04:42:35.74: [ 2129]: DELAY 10 ms Oct 17 04:42:35.75: [ 2129]: MODEM flush i/o Oct 17 04:42:35.75: [ 2129]: <-- [4:ATZ\r] Oct 17 04:42:36.71: [ 2129]: --> [2:OK] Oct 17 04:42:36.71: [ 2129]: DELAY 3000 ms Oct 17 04:42:39.71: [ 2129]: <-- [5:ATE0\r] Oct 17 04:42:39.72: [ 2129]: --> [4:ATE0] Oct 17 04:42:39.72: [ 2129]: --> [2:OK] Oct 17 04:42:39.72: [ 2129]: <-- [5:ATV1\r] Oct 17 04:42:39.73: [ 2129]: --> [2:OK] Oct 17 04:42:39.73: [ 2129]: <-- [5:ATQ0\r] Oct 17 04:42:39.74: [ 2129]: --> [2:OK] Oct 17 04:42:39.74: [ 2129]: <-- [7:ATS0=0\r] Oct 17 04:42:39.75: [ 2129]: --> [2:OK] Oct 17 04:42:39.75: [ 2129]: <-- [7:ATS8=2\r] Oct 17 04:42:39.76: [ 2129]: --> [2:OK] Oct 17 04:42:39.76: [ 2129]: <-- [8:ATS7=60\r] Oct 17 04:42:39.77: [ 2129]: --> [2:OK] Oct 17 04:42:39.77: [ 2129]: <-- [6:AT&K3\r] Oct 17 04:42:39.78: [ 2129]: --> [2:OK] Oct 17 04:42:39.78: [ 2129]: <-- [21:AT+FCLASS=2.1;+FRY=4\r] Oct 17 04:42:39.79: [ 2129]: --> [2:OK] Oct 17 04:42:39.79: [ 2129]: <-- [9:AT+FLO=2\r] Oct 17 04:42:39.80: [ 2129]: --> [2:OK] Oct 17 04:42:39.80: [ 2129]: <-- [9:AT+FPP=0\r] Oct 17 04:42:39.81: [ 2129]: --> [2:OK] Oct 17 04:42:39.81: [ 2129]: <-- [9:AT+FBO=0\r] Oct 17 04:42:39.82: [ 2129]: --> [2:OK] Oct 17 04:42:39.82: [ 2129]: <-- [10:AT+FCT=30\r] Oct 17 04:42:39.83: [ 2129]: --> [2:OK] Oct 17 04:42:39.83: [ 2129]: <-- [11:AT+FCQ=1,0\r] Oct 17 04:42:39.84: [ 2129]: --> [2:OK] Oct 17 04:42:39.84: [ 2129]: <-- [15:AT+FNR=1,1,1,1\r] Oct 17 04:42:39.85: [ 2129]: --> [2:OK] Oct 17 04:42:39.85: [ 2129]: <-- [13:AT+FAP=1,1,1\r] Oct 17 04:42:39.86: [ 2129]: --> [2:OK] Oct 17 04:42:39.86: [ 2129]: <-- [9:AT+FIE=0\r] Oct 17 04:42:39.87: [ 2129]: --> [2:OK] Oct 17 04:42:39.87: [ 2129]: <-- [9:AT+FBU=1\r] Oct 17 04:42:39.88: [ 2129]: --> [2:OK] Oct 17 04:42:39.88: [ 2129]: <-- [23:AT+FCC=1,D,2,2,3,1,0,0\r] Oct 17 04:42:39.89: [ 2129]: --> [2:OK] Oct 17 04:42:39.89: [ 2129]: <-- [5:ATM0\r] Oct 17 04:42:39.90: [ 2129]: --> [2:OK] Oct 17 04:42:39.90: [ 2129]: sched policy=1, priority=1 Oct 17 04:42:39.90: [ 2129]: MODEM input buffering enabled Oct 17 04:42:39.90: [ 2129]: <-- [21:AT+FCLASS=2.1;+FRY=4\r] Oct 17 04:42:40.01: [ 2129]: --> [2:OK] Oct 17 04:42:40.01: [ 2129]: <-- [9:AT+FLO=2\r] Oct 17 04:42:40.12: [ 2129]: --> [2:OK] Oct 17 04:42:40.12: [ 2129]: <-- [9:AT+FPP=0\r] Oct 17 04:42:40.23: [ 2129]: --> [2:OK] Oct 17 04:42:40.23: [ 2129]: <-- [9:AT+FBO=0\r] Oct 17 04:42:40.34: [ 2129]: --> [2:OK] Oct 17 04:42:40.34: [ 2129]: <-- [10:AT+FCT=30\r] Oct 17 04:42:40.45: [ 2129]: --> [2:OK] Oct 17 04:42:40.45: [ 2129]: <-- [11:AT+FCQ=1,0\r] Oct 17 04:42:40.56: [ 2129]: --> [2:OK] Oct 17 04:42:40.56: [ 2129]: <-- [15:AT+FNR=1,1,1,1\r] Oct 17 04:42:40.67: [ 2129]: --> [2:OK] Oct 17 04:42:40.67: [ 2129]: <-- [13:AT+FAP=1,1,1\r] Oct 17 04:42:40.78: [ 2129]: --> [2:OK] Oct 17 04:42:40.78: [ 2129]: <-- [9:AT+FIE=0\r] Oct 17 04:42:40.89: [ 2129]: --> [2:OK] Oct 17 04:42:40.89: [ 2129]: <-- [9:AT+FBU=1\r] Oct 17 04:42:41.00: [ 2129]: --> [2:OK] Oct 17 04:42:41.00: [ 2129]: <-- [23:AT+FCC=1,D,2,2,3,1,0,0\r] Oct 17 04:42:41.11: [ 2129]: --> [2:OK] Oct 17 04:42:41.11: [ 2129]: <-- [20:AT+FLI="DebtDomain"\r] Oct 17 04:42:41.22: [ 2129]: --> [2:OK] Oct 17 04:42:41.22: [ 2129]: DIAL 1xxxxxxxxxxx Oct 17 04:42:41.22: [ 2129]: <-- [32:AT+FCC=,5,,,,,,,0;DT1xxxxxxxxxxx\r] Oct 17 04:42:55.89: [ 2129]: --> [101:+FHR:FF 03 20 B5 00 AA 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 31 2E 36 ] Oct 17 04:42:55.89: [ 2129]: --> [4:+FCO] Oct 17 04:42:56.01: [ 2129]: --> [91:+FNF:B5 00 AA 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 31 2E 36] Oct 17 04:42:56.01: [ 2129]: REMOTE NSF "B5 00 AA 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 31 2E 36" Oct 17 04:42:56.01: [ 2129]: NSF remote fax equipment: HylaFAX Oct 17 04:42:56.01: [ 2129]: NSF remote station ID: "HylaFAX (tm) Version 4.1.6" Oct 17 04:42:56.78: [ 2129]: --> [74:+FHR:FF 03 40 3x 3x 3x 3x 2E 3x 3x 3x 2E 3x 3x 3x 2E 31 20 20 20 20 20 20 ] Oct 17 04:42:56.78: [ 2129]: --> [27:+FCI:" 1.xxx.xxx.xxxx"] Oct 17 04:42:56.78: [ 2129]: REMOTE CSI "1.xxx.xxx.xxxx" Oct 17 04:42:57.26: [ 2129]: --> [35:+FHR:FF 13 80 00 EE FA 80 9E DF 03 ] Oct 17 04:42:57.26: [ 2129]: --> [23:+FIS:77,5,2,2,1,0,0,0,0] Oct 17 04:42:57.26: [ 2129]: --> [2:OK] Oct 17 04:42:57.26: [ 2129]: REMOTE best rate 14400 bit/s Oct 17 04:42:57.26: [ 2129]: REMOTE max page width 2432 pixels in 303 mm Oct 17 04:42:57.26: [ 2129]: REMOTE max unlimited page length Oct 17 04:42:57.26: [ 2129]: REMOTE best vres 7.7 line/mm Oct 17 04:42:57.26: [ 2129]: REMOTE best format 2-D MR Oct 17 04:42:57.26: [ 2129]: REMOTE best 0 ms/scanline Oct 17 04:42:57.26: [ 2129]: USE 14400 bit/s Oct 17 04:42:57.26: [ 2129]: USE 0 ms/scanline Oct 17 04:42:57.26: [ 2129]: SEND file "docq/doc167.cover;30" Oct 17 04:42:57.26: [ 2129]: USE page width 1728 pixels in 215 mm Oct 17 04:42:57.26: [ 2129]: USE unlimited page length Oct 17 04:42:57.26: [ 2129]: USE 3.85 line/mm Oct 17 04:42:57.26: [ 2129]: USE 1-D MR Oct 17 04:42:57.26: [ 2129]: <-- [23:AT+FIS=0,5,0,2,0,0,0,0\r] Oct 17 04:42:57.37: [ 2129]: --> [2:OK] Oct 17 04:42:57.37: [ 2129]: <-- [7:AT+FDT\r] Oct 17 04:42:58.50: [ 2129]: --> [74:+FHT:FF 03 43 20 20 20 20 20 20 20 20 20 20 6E 69 61 6D 6F 44 74 62 65 44 ] Oct 17 04:42:58.50: [ 2129]: --> [32:+FHT:FF 13 83 00 22 F8 80 80 00 ] Oct 17 04:43:04.26: [ 2129]: --> [14:+FHR:FF 13 84 ] Oct 17 04:43:04.26: [ 2129]: --> [22:+FCS:0,5,0,2,0,0,0,0,0] Oct 17 04:43:04.39: [ 2129]: --> [7:CONNECT] Oct 17 04:43:04.39: [ 2129]: SEND begin page Oct 17 04:43:04.39: [ 2129]: <-- data [1030] Oct 17 04:43:04.39: [ 2129]: <-- data [1029] Oct 17 04:43:04.39: [ 2129]: <-- data [1027] Oct 17 04:43:04.39: [ 2129]: <-- data [1027] Oct 17 04:43:05.31: [ 2129]: <-- data [1030] Oct 17 04:43:05.31: [ 2129]: <-- data [1029] Oct 17 04:43:05.31: [ 2129]: <-- data [780] Oct 17 04:43:06.01: [ 2129]: SENT 6917 bytes of data Oct 17 04:43:06.01: [ 2129]: SEND 1D RTC Oct 17 04:43:06.01: [ 2129]: <-- data [9] Oct 17 04:43:06.01: [ 2129]: SEND end page Oct 17 04:43:06.01: [ 2129]: SEND send MPS (more pages, same document) Oct 17 04:43:06.01: [ 2129]: <-- data [2] Oct 17 04:43:09.80: [ 2129]: --> [14:+FHT:FF 13 4F ] Oct 17 04:43:11.81: [ 2129]: --> [14:+FHR:FF 13 8C ] Oct 17 04:43:11.81: [ 2129]: --> [2:OK] Oct 17 04:43:11.81: [ 2129]: <-- [8:AT+FPS?\r] Oct 17 04:43:11.92: [ 2129]: --> [2:01] Oct 17 04:43:11.92: [ 2129]: --> [2:OK] Oct 17 04:43:11.92: [ 2129]: SEND recv MCF (message confirmation) Oct 17 04:43:11.92: [ 2129]: SEND FAX (00000355): FROM xx@xxxxxxxxx TO +1xxxxxxxxxxx (page 1 of 2 sent in 0:14) Oct 17 04:43:11.92: [ 2129]: SEND FAX (00000355): FROM xx@xxxxxxxxx TO +1xxxxxxxxxxx (docq/doc167.cover;30 sent in 0:14) Oct 17 04:43:11.92: [ 2129]: SEND file "docq/doc333.ps;30" Oct 17 04:43:11.92: [ 2129]: USE page width 1728 pixels in 215 mm Oct 17 04:43:11.92: [ 2129]: USE unlimited page length Oct 17 04:43:11.92: [ 2129]: USE 3.85 line/mm Oct 17 04:43:11.92: [ 2129]: USE 1-D MR Oct 17 04:43:11.92: [ 2129]: <-- [7:AT+FDT\r] Oct 17 04:43:12.09: [ 2129]: --> [7:CONNECT] Oct 17 04:43:12.09: [ 2129]: SEND begin page Oct 17 04:43:12.09: [ 2129]: <-- data [1028] Oct 17 04:43:12.09: [ 2129]: <-- data [1027] Oct 17 04:43:12.09: [ 2129]: <-- data [1027] Oct 17 04:43:12.09: [ 2129]: <-- data [1026] Oct 17 04:43:12.09: [ 2129]: <-- data [1026] Oct 17 04:43:13.04: [ 2129]: <-- data [1026] Oct 17 04:43:13.04: [ 2129]: <-- data [1027] Oct 17 04:43:13.76: [ 2129]: <-- data [1027] Oct 17 04:43:14.44: [ 2129]: <-- data [1028] Oct 17 04:43:14.44: [ 2129]: <-- data [1024] Oct 17 04:43:15.16: [ 2129]: <-- data [1025] Oct 17 04:43:15.84: [ 2129]: <-- data [1033] Oct 17 04:43:16.54: [ 2129]: <-- data [183] Oct 17 04:43:16.54: [ 2129]: SENT 12470 bytes of data Oct 17 04:43:16.54: [ 2129]: SEND 1D RTC Oct 17 04:43:16.54: [ 2129]: <-- data [9] Oct 17 04:43:16.54: [ 2129]: SEND end page Oct 17 04:43:16.54: [ 2129]: SEND send EOP (no more pages or documents) Oct 17 04:43:16.54: [ 2129]: <-- data [2] Oct 17 04:43:20.59: [ 2129]: --> [14:+FHT:FF 13 2F ] Oct 17 04:43:22.49: [ 2129]: --> [14:+FHR:FF 13 8C ] Oct 17 04:43:23.55: [ 2129]: --> [14:+FHT:FF 13 FB ] Oct 17 04:43:23.94: [ 2129]: --> [6:+FHS:0] Oct 17 04:43:23.94: [ 2129]: REMOTE HANGUP: Normal and proper end of connection (code 0) Oct 17 04:43:23.94: [ 2129]: SEND recv MCF (message confirmation) Oct 17 04:43:23.94: [ 2129]: SEND FAX (00000355): FROM xx@xxxxxxxxx TO +1xxxxxxxxxxx (page 2 of 2 sent in 0:12) Oct 17 04:43:23.94: [ 2129]: SEND FAX (00000355): FROM xx@xxxxxxxxx TO +1xxxxxxxxxxx (docq/doc333.ps;30 sent in 0:12) Oct 17 04:43:23.94: [ 2129]: <-- [5:ATH0\r] Oct 17 04:43:23.94: [ 2129]: --> [2:OK] Oct 17 04:43:23.94: [ 2129]: MODEM set DTR OFF Oct 17 04:43:23.95: [ 2129]: sched policy=0, priority=0 Oct 17 04:43:23.95: [ 2129]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
- Follow-Ups:
- Prev by Date: Re: [hylafax-users] restart hylafax problem
- Next by Date: [hylafax-users] setting max bitrate for receiving faxes
- Previous by thread: [hylafax-users] Fax Receive Problem
- Next by thread: Re: [hylafax-users] Do I need to configure anything special to get 2D-MMR+ECM in Class 1 on CVS?
- Index(es):
Project hosted by iFAX Solutions