Re: [hylafax-users] hylafax use only one of two modems

[Matthias Reich <rei@xxxxxxxx>]

Hi,

this is a lot to unprecise to give you any hints.

Did you do faxaddmodem to setup the modem ??
Did you do faxmodem ttyS??, to restart your modem ??
what does faxstat -s show, when you put the fax in the queue 
with sendfax -n -h yourmodem@yourfaxserver -d PHONENUMBER FILE ??

If the fax is in the queue and you still have no success,
turn the SessionTracing Parameter for the desired modem in the
config-file config.ttyS?? to 0xff.

When hylafax atempts to transmit a fax, you can have a look at the
comm-log in the log directory there are a lot of files c???????.
the latest file should be the one with the debugging information
 
HIH
-m


Am Dienstag, 30. September 2003 18:51 schrieb Abacus Computer:
> Hi,
>
> I have tried to send a fax with specified modem. But there happens nothing
> and I cannot find an error message.
>
> There a the document in the docq and in sendq also. But I cannot find any
> hint why it is not working.
>
> What can I do?
>
> best regards
> Christian
>
> At 12:24  26.09.03, you wrote:
> >Content-Transfer-Encoding: 8bit
> >Content-Disposition: inline
> >
> >Hi Christian
> >
> >man sendfax
> >
> >       -h [modem@]host[:port]
> >                    Force  the  jobs to be processed on a specific
> >                    host  and,  optionally,  using  a   particular
> >                    modem.  The host may be either a symbolic name
> >                    or a network address.  If no -h option is sup�
> >                    plied,  sendfax uses the FAXSERVER environment
> >                    variable to identify  the  HylaFAX  server  to
> >                    which  the  jobs  should  be  directed.  If no
> >                    server is specified then sendfax  attempts  to
> >                    contact  a  server  on  the local host.  If no
> >                    modem is specified, the job will be  submitted
> >                    to any available modem.
> >HIH
> >
> >-m
> >
> >Am Freitag, 26. September 2003 03:07 schrieb Abacus Computer:
> > > Thanks,
> > > but I am working with sendfax and I do not find any parameter to
> > > specify the modem to fax.
> > > Normally hylafax must use the second fax if the first is in use - or
> > > not? Or need this a special configuration?
> > >
> > > How can I test ttyS1 by hylafax?
> > >
> > > regards
> > > Christian
> > >
> > > At 09:25  25.09.03, you wrote:
> > > >Hi Christian,
> > > >
> > > >try faxmodem ttyS1 and see if the faxes will be sent on ttyS1 too.
> > > >
> > > >HIH
> > > >-m
> > > >
> > > >Am Donnerstag, 25. September 2003 16:54 schrieb Abacus Computer:
> > > > > Hi,
> > > > > I have running hylafax 4.1.5 on Redhat-linux 8.0 with two modems
> > > > > Practical Peripherals Modem  Model # PM144MT II
> > > > >
> > > > > Both are installed and working on ttyS0 and ttyS1, tested with
> > > > > miniserv, and both have the status "Running and idle".
> > > > >
> > > > > But if I send a lot of faxes (10) in a short time (1 minute) all
> > > > > faxes are sent about ttyS0 one after another and nothing about
> > > > > ttyS1. I have no idea what there are wrong.
> > > > >
> > > > > Best regards
> > > > > Christian
> > > > >
> > > > >
> > > > > ____________________ HylaFAX(tm) Users Mailing List
> > > > > _______________________ To subscribe/unsubscribe, click
> > > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > > >
> > > >--
> > > >HAGOS eG                 phone: +49 711 7880592
> > > >Matthias Reich             fax: +49 711 7880535
> > > >Industriestr. 62           web: http://www.hagos.de
> > > >D-70565 Stuttgart         mail: rei@xxxxxxxx
> > > >Germany
> > > >
> > > >____________________ HylaFAX(tm) Users Mailing List
> > > > _______________________ To subscribe/unsubscribe, click
> > > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s
> > > > unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn
> > > > about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List
> > > _______________________ To subscribe/unsubscribe, click
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe
> > > hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about
> > > commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*
> >
> >--
> >HAGOS eG                 phone: +49 711 7880592
> >Matthias Reich             fax: +49 711 7880535
> >Industriestr. 62           web: http://www.hagos.de
> >D-70565 Stuttgart         mail: rei@xxxxxxxx
> >Germany

-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*