Re: [hylafax-users] Eicon DIVA PRI card

[Chris Jones <c.jones@xxxxxxxxxxx>]

Hi

On Wed, 2003-09-24 at 00:41, Chris Parsons wrote:
> I havent seen that error before. Are you sure you are running the kernel
> with the ISDN compiled in. Are the appropriate modules (eicon.o I think)
> loaded? On my system, the eicon driver is compiled as part of the kernel,

Yeah, I compiled them as part of the kernel. I did have to slightly
modify a couple of defines in the kernel driver because it was looking
for the PRI card under a slightly different PCI ID to the one our card
has, which suggests a hardware revision.

> This was what I found with the Eicon card. It was difficult to setup. The
> information is all out there, but it is dated, patchy and conflicting. There

I've been googling like mad for a few days and come to roughly the same
conclusion there ;)

Simply from the fact that I need to get this working soon, I think I'm
going to just install the card in a new box running an unpatched RH8,
then use a patched box to proxy it onto the net.

Cheers,
-- 
Chris Jones
Technical Systems Manager
Systemes de la Technologie Applique Ltd.
Tel: +44 (0) 1273 323922   Fax: +44 (0) 1273 388334



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*