Re: [hylafax-users] Eicon DIVA PRI card

[Chris Parsons <chrisp@xxxxxxxxxxxxxx>]

I'm not sure why the card isnt loading from the eiconctrl tool. Thankfully,
I havent seen that error before. Are you sure you are running the kernel
with the ISDN compiled in. Are the appropriate modules (eicon.o I think)
loaded? On my system, the eicon driver is compiled as part of the kernel,
not a module so it is automatically picked up at boot. The ttyI interfaces
are those of the card. However, before you can use them, you need to give
the card the AT&E command which sets the Direct Indial or MSN/EAZ number.
The number that goes here depends on your ISDN system and the indial number
used.
Try it with AT&Eyournumber

to get hylafax to do this when running, change the following line in
config.ttyIx:
ModemResetCmds:         "ATZ&E83881699"

This was what I found with the Eicon card. It was difficult to setup. The
information is all out there, but it is dated, patchy and conflicting. There
would be atleast 3 or 4 ways of doing this and I tried them all with only
this solution working happily for me. Once setup though, I have very rarely
had to touch it except for the occasional reboot.


Chris
Infotec.

> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Chris Jones
> Sent: Wednesday, 24 September 2003 1:01 AM
> To: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Eicon DIVA PRI card
> 
> 
> Hi
> 
> On Tue, 2003-09-23 at 15:13, Chris Jones wrote:
> > My only question is, where do I go from there? Should I 
> still be using
> > the c2faxrecv/c2faxsend capi stuff?
> 
> Well I figured out that I should be using /dev/ttyI devices to talk to
> the card, but I think I need to send the loader more options or
> something, when I opened /dev/ttyI0 in minicom I get:
> 
> ATDT01273388334
> NO MSN/EAZ
> 
> Anyone know what to do? :)
> 
> Cheers,
> -- 
> Chris Jones
> Technical Systems Manager
> Systemes de la Technologie Applique Ltd.
> Tel: +44 (0) 1273 323922   Fax: +44 (0) 1273 388334
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe 
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail 
> sales@xxxxxxxxxxxx*
> 
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*