HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Eicon DIVA PRI card



Hi

On Tue, 2003-09-23 at 00:58, Chris Parsons wrote:
> This will load and start the card.
> 
> I hope some of this helps.

Yes, that all worked fine, the output of the final step was:

-(root@shiznit)-(~/scratch/isdn4k-utils)- eiconctrl -d eicon0 load ETSI
Adapter-type is Diva Server PRI/PCI
Card-ID = 1
Using Eicon's divaload...
EICON DIVALOAD: Firmware loader for Eicon DIVA Server ISDN adapters
divaload: 1 adapter found
divaload: Loading Adapter 1 (DIVA Server PRI) with ETSI firmware
          DSS1, Europe (Germany, ...)
DSPDVV90 Download Combi-File Version 1.00 Build 100-278
/dev/isdnctrl START
error doing ioctl: Operation not permitted

My only question is, where do I go from there? Should I still be using
the c2faxrecv/c2faxsend capi stuff?

Cheers,
-- 
Chris Jones
IT Department
ICM Group



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*




Project hosted by iFAX Solutions