Re: [hylafax-users] Eicon DIVA PRI card

[Chris Parsons <chrisp@xxxxxxxxxxxxxx>]

We use it here. I struggled with the capi gear and gave up. Currently we are
running the ISDN for linux packages. Its probably not the ideal way of doing
it, but it works.
Firstly you will need to compile a new kernel including the eicon drivers.
For the Eicon Diva Server 4-BRI we used:

ISDN Support Y
Support Audio via ISDN Y
Support AT Fax Class 1 and 2 Commands
X.25 PLP on top of ISDN

ISDN Features: All no.
Passive ISDN Cards: All no.
Active ISDN Cards:
Legacy EICON Driver: Y
Eicon PCI Diva Server BRI/PRI/4BRI Support: Y
Everything Else here: no.


You need to get IDSN4K-utils the ones with redhat don't include the eicon
driver tools. Download the latest version from Isdn4linux.de. You will need
to unpack, configure and install. Run /sbin/divaload to get a list of
available protocols. Find your correct protocol. Example: Australia and
Telstra Onramp is AUSTRAL Once installed, run /sbin/eiconctrl -d ecion0 load
AUSTRAL
This will load and start the card.


I hope some of this helps.


Chris.
Infotec Communications.

> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Chris Jones
> Sent: Tuesday, 23 September 2003 1:28 AM
> To: hylafax-users@xxxxxxxxxxx
> Subject: [hylafax-users] Eicon DIVA PRI card
> 
> 
> Hi
> 
> Are there any people out there who've successfully gotten an 
> Eicon DIVA
> PRI card working with HylaFAX?
> I'm having to use a rather annoying set of capi related tools to even
> make the card work because Eicon will only support specific (and very
> old) versions of Red Hat and SuSE, and I don't really know very much
> about capi!
> So far I have managed to get it to receive ok, but I can't 
> for the life
> of me figure out how to send faxes, so I was hoping to find 
> someone who
> had a similar setup and could help me out.
> 
> Cheers,
> -- 
> Chris Jones
> IT Department
> ICM Group
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>   To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe 
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail 
> sales@xxxxxxxxxxxx*
> 
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxxxxx*