[hylafax-users] <-- [9:AT+FTS=7\r] error

["Alvaro Rosales R." <arosales@wintersperu.com.pe>]

Hi guys I am using a Class1 FAx modem I can get faxes without problems , but I get 
tis error  [9:AT+FTS=7\r] , I saw in the mail archives that a guy had this problem too 
, and he added this lines to his config file:
Class1SendEOPWaitCmd: <delay:90> 
 Class1SendTCFWaitCmd: <delay:70> 
 Class1SendPPMWaitCmd: <delay:70> 
but I still get the same error.
Can you help me please? 
------- Forwarded message follows -------
Date sent:      	Thu, 28 Aug 2003 10:27:35 -0500 (PET)
From:           	arosales@fax-gf.winters.com.pe
To:             	aran80@winters.com.pe

Aug 28 10:25:52.48: [24944]: SESSION BEGIN 00000188 14153367246
Aug 28 10:25:52.48: [24944]: HylaFAX (tm) Version 4.1.5
Aug 28 10:25:52.48: [24944]: SEND FAX: JOB 19 DEST 3367246 COMMID 00000188 DEVICE '/dev/tty03'
Aug 28 10:25:52.48: [24944]: DELAY 75 ms
Aug 28 10:25:52.57: [24944]: DELAY 2600 ms
Aug 28 10:25:55.18: [24944]: DELAY 10 ms
Aug 28 10:25:55.20: [24944]: <-- [4:ATZ\r]
Aug 28 10:25:55.36: [24944]: --> [2:OK]
Aug 28 10:25:55.36: [24944]: DELAY 3000 ms
Aug 28 10:25:58.37: [24944]: <-- [5:ATE0\r]
Aug 28 10:25:58.47: [24944]: --> [4:ATE0]
Aug 28 10:25:58.47: [24944]: --> [2:OK]
Aug 28 10:25:58.47: [24944]: <-- [5:ATV1\r]
Aug 28 10:25:58.57: [24944]: --> [2:OK]
Aug 28 10:25:58.57: [24944]: <-- [5:ATQ0\r]
Aug 28 10:25:58.67: [24944]: --> [2:OK]
Aug 28 10:25:58.67: [24944]: <-- [7:ATS0=0\r]
Aug 28 10:25:58.77: [24944]: --> [2:OK]
Aug 28 10:25:58.77: [24944]: <-- [7:ATS8=2\r]
Aug 28 10:25:58.87: [24944]: --> [2:OK]
Aug 28 10:25:58.87: [24944]: <-- [8:ATS7=60\r]
Aug 28 10:25:58.97: [24944]: --> [2:OK]
Aug 28 10:25:58.97: [24944]: <-- [12:AT+FCLASS=1\r]
Aug 28 10:25:59.08: [24944]: --> [2:OK]
Aug 28 10:25:59.08: [24944]: <-- [5:ATM0\r]
Aug 28 10:25:59.18: [24944]: --> [2:OK]
Aug 28 10:25:59.18: [24944]: <-- [12:AT+FCLASS=1\r]
Aug 28 10:25:59.39: [24944]: --> [2:OK]
Aug 28 10:25:59.39: [24944]: DIAL 3367246
Aug 28 10:25:59.39: [24944]: <-- [12:ATDT3367246\r]
Aug 28 10:26:22.79: [24944]: --> [7:CONNECT]
Aug 28 10:26:25.99: [24944]: --> [2:OK]
Aug 28 10:26:25.99: [24944]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 95 C8 08 01 49 02 50 52 4F 43 41 43 41 4F 20 53 41 20 20 20 20 20 03 B0"
Aug 28 10:26:25.99: [24944]: NSF remote fax equipment: Panasonic KX-F230 or KX-FT21 or ...
Aug 28 10:26:25.99: [24944]: NSF remote station ID: "PROCACAO SA     "
Aug 28 10:26:25.99: [24944]: <-- [9:AT+FRH=3\r]
Aug 28 10:26:26.02: [24944]: --> [7:CONNECT]
Aug 28 10:26:26.02: [24944]: --> [2:OK]
Aug 28 10:26:26.02: [24944]: REMOTE CSI "3367246"
Aug 28 10:26:26.02: [24944]: <-- [9:AT+FRH=3\r]
Aug 28 10:26:26.04: [24944]: --> [7:CONNECT]
Aug 28 10:26:26.04: [24944]: --> [2:OK]
Aug 28 10:26:26.04: [24944]: REMOTE best rate 9600 bit/s
Aug 28 10:26:26.04: [24944]: REMOTE max page width 1728 pixels in 215 mm
Aug 28 10:26:26.04: [24944]: REMOTE max unlimited page length 
Aug 28 10:26:26.04: [24944]: REMOTE best vres 7.7 line/mm
Aug 28 10:26:26.04: [24944]: REMOTE best format 2-D MR
Aug 28 10:26:26.04: [24944]: REMOTE best 20 ms, 10 ms/scanline
Aug 28 10:26:26.04: [24944]: USE 9600 bit/s
Aug 28 10:26:26.04: [24944]: USE 20 ms, 10 ms/scanline
Aug 28 10:26:26.04: [24944]: SEND file "docq/doc19.ps;40"
Aug 28 10:26:26.04: [24944]: USE page width 1728 pixels in 215 mm
Aug 28 10:26:26.04: [24944]: USE unlimited page length 
Aug 28 10:26:26.04: [24944]: USE 3.85 line/mm
Aug 28 10:26:26.04: [24944]: USE 2-D MR
Aug 28 10:26:26.04: [24944]: SEND training at v.29 9600 bit/s
Aug 28 10:26:26.04: [24944]: <-- [9:AT+FTH=3\r]
Aug 28 10:26:26.09: [24944]: --> [7:CONNECT]
Aug 28 10:26:26.09: [24944]: <-- data [23]
Aug 28 10:26:26.09: [24944]: <-- data [2]
Aug 28 10:26:26.11: [24944]: --> [7:CONNECT]
Aug 28 10:26:26.11: [24944]: <-- data [6]
Aug 28 10:26:26.11: [24944]: <-- data [2]
Aug 28 10:26:28.28: [24944]: --> [2:OK]
Aug 28 10:26:28.29: [24944]: <-- [9:AT+FTS=7\r]
Aug 28 10:26:28.30: [24944]: --> [5:ERROR]
Aug 28 10:26:28.30: [24944]: MODEM Command error
Aug 28 10:26:28.30: [24944]: <-- [9:AT+FTH=3\r]
Aug 28 10:26:28.34: [24944]: --> [7:CONNECT]
Aug 28 10:26:28.34: [24944]: <-- data [3]
Aug 28 10:26:28.34: [24944]: <-- data [2]
Aug 28 10:26:29.66: [24944]: --> [2:OK]
Aug 28 10:26:29.66: [24944]: <-- [5:ATH0\r]
Aug 28 10:26:30.09: [24944]: --> [10:NO CARRIER]
Aug 28 10:26:30.09: [24944]: MODEM No carrier
Aug 28 10:26:30.09: [24944]: SESSION END
- ------- End of forwarded message -------

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*