HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Multitech MT5634ZPX-PCI config



On Tue, 29 Jul 2003 21:17:04 +0200, "Tjardick van der Kraan"
<tjardick@vanderkraan.net> wrote:

>> You can try setting it into class 2.1 and see if problems are solved; then
>> try upgrading firmware.
>Tried putting in class2.1 but then modem goes wedged, same goes for class2.0

Actually, I was wrong; looking here
http://www.multitech.com/PRODUCTS/MultiModemZPX/
it seems there are different versions of the same modem, only *-V92 supports
the new features (33k, ecm, maybe class2.1). I don't know why they do this
(I hope I understood well the web pages).

>Class2 modem goes nicely into running and idle same for class1.
>Will Class2 solve my 'old' fax problems maybe ?
Maybe yes; if the problems are due to subtle protocol issues, changing class
may be an option.

If things stay the same, try resetting it to class1, put
SessionTracing:            0xFFF
in config.<devid>, restart faxgetty, send a fax, send a log.

-- 
giulioo@pobox.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions