HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Multitech MT5634ZPX-PCI config



On Tue, 29 Jul 2003 17:38:58 +0200, "Tjardick van der Kraan"
<tjardick@vanderkraan.net> wrote:

>- Hyla working with new (G3/14400) but not with old (9600).
>- receiving pages with random stripes even when sending a blank page

>Don't know the firmware of the modem as i just plugged it in out of the box,
>any AT command i can run the help you some more ?
You can find out how to query firmware here (ie: ati0i1i2i3)
http://www.multitech.com/SUPPORT/Firmware/determine.asp#modems
then look here to see if an upgrade is available
http://www.multitech.com/SUPPORT/MultiModemZPX/firmware.asp


>here's my current config.ttyS4, i moved back to the standard faxaddmodem
>one...
>..
>ModemType:              Class1          # use this to supply a hint
>Class1TCFRecvHack:      yes             # avoid +FCERROR before TCF
># Class1MsgRecvHackCmd: AT+FRS=1        # avoid +FCERROR before image
You configured it in class1, and it's ok, however this modem can do many
more things if you use it in class2.1 with latest firmware (ecm, 33k,
realtime compression).

You can try setting it into class 2.1 and see if problems are solved; then
try upgrading firmware.

-- 
giulioo@pobox.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions