Re: [hylafax-users] Multitech MT5634ZPX-PCI config

[George Bell <gbell5@cox.net>]

Giulio Orsero wrote:
> 20030729163220.4B40B12719@mail.golden.dom">
> On Tue, 29 Jul 2003 17:38:58 +0200, "Tjardick van der Kraan"
> <tjardick@vanderkraan.net> wrote:
>
> > - Hyla working with new (G3/14400) but not with old (9600).
> > - receiving pages with random stripes even when sending a blank page
> >     
>
> > Don't know the firmware of the modem as i just plugged it in out of the box,
> > any AT command i can run the help you some more ?
> >       
> You can find out how to query firmware here (ie: ati0i1i2i3)
> http://www.multitech.com/SUPPORT/Firmware/determine.asp#modems
> then look here to see if an upgrade is available
> http://www.multitech.com/SUPPORT/MultiModemZPX/firmware.asp
>
>
> > here's my current config.ttyS4, i moved back to the standard faxaddmodem
> > one...
> > ..
> > ModemType:              Class1          # use this to supply a hint
> > Class1TCFRecvHack:      yes             # avoid +FCERROR before TCF
> > # Class1MsgRecvHackCmd: AT+FRS=1        # avoid +FCERROR before image
> >         
> You configured it in class1, and it's ok, however this modem can do many
> more things if you use it in class2.1 with latest firmware (ecm, 33k,
> realtime compression).
>         
Also super g3 (color) fax, though its not supported in hylafax and nobody
seems to be interested in it.
> 20030729163220.4B40B12719@mail.golden.dom">
>
> You can try setting it into class 2.1 and see if problems are solved; then
> try upgrading firmware.
>
>