Re: [hylafax-users] problem with AT+FTS

[Lee Howard <faxguy@howardsilvan.com>]

On 2003.07.25 07:49 Gianluca Montecchi wrote:
> 
> Hello.
> 
> I have some trouble with hylafax (Version 4.1.6) under Debian Woody.
> 
> I compiled from source and all went ok.
> The problem came when i try to send a fax. I get the "Stop and wait
> failure"
> error.
> 
> The workaround I found (add the Class1SendEOPWaitCmd etc. options) did
> not
> resolv the problem.

There is no Class1SendEOPWaitCmd.  Try adding:

Class1PPMWaitCmd: <delay:7>
Class1EOPWaitCmd: <delay:9>
Class1TCFWaitCmd: <delay:7>
Class1SwitchingCmd: <delay:7>

> AT+FTS=?	RESULT = "ERROR"	RESPONSE = "ERROR"
> AT+FRS=?	RESULT = "ERROR"	RESPONSE = "ERROR"

Unfortunately, this doesn't tell us much since it is supposed to 
respond ERROR if it's not connected.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*