HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] problem with AT+FTS




Hello.

I have some trouble with hylafax (Version 4.1.6) under Debian Woody.

I compiled from source and all went ok. 
The problem came when i try to send a fax. I get the "Stop and wait failure" 
error.

The workaround I found (add the Class1SendEOPWaitCmd etc. options) did not 
resolv the problem.

The modem is a "Hamlet H56XCT Data/Fax/Voice Modem".

Any hints ?

The output of the probemodem program is attached.
At least there is some pointer to the documentation to write a config for this 
modem ?


bye
Gianluca

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 modem.

ATI0	RESULT = "OK"	RESPONSE = "Hamlet H56XCT Data/Fax/Voice Modem"
ATI1	RESULT = "OK"	RESPONSE = "External Controller Ver1.20, CheckSum=B7E8"
ATI2	RESULT = "OK"	RESPONSE = "TEST OK!"
ATI3	RESULT = "OK"	RESPONSE = "Hamlet H56XCT Data/Fax/Voice Modem"
ATI4	RESULT = "OK"	RESPONSE = "DSP Ver1.10 CheckSum=DC84"
ATI5	RESULT = "OK"	RESPONSE = "Italy"
ATI6	RESULT = "OK"	RESPONSE = "0"
ATI7	RESULT = "OK"	RESPONSE = "Controller Ver1.20 Date:Oct 04 16:08"
ATI8	RESULT = "OK"	RESPONSE = "DSP Ver1.10 Date:May 18 09:55"
ATI9	RESULT = "OK"	RESPONSE = "Software Speakerphone"

Class 1 stuff...

AT+FCLASS=?	RESULT = "OK"	RESPONSE = "0,1,8"
AT+FCLASS?	RESULT = "OK"	RESPONSE = "0"
AT+FCLASS=0	RESULT = "OK"	RESPONSE = "OK"
AT+FCLASS=1	RESULT = "OK"	RESPONSE = "OK"
AT+FCLASS?	RESULT = "OK"	RESPONSE = "1"
AT+FJUNK=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FJUNK?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAA=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAA?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAE=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAE?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FTH=?	RESULT = "OK"	RESPONSE = "3"
AT+FRH=?	RESULT = "OK"	RESPONSE = "3"
AT+FTM=?	RESULT = "OK"	RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?	RESULT = "OK"	RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FRS=?	RESULT = "ERROR"	RESPONSE = "ERROR"



Project hosted by iFAX Solutions