 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Fax Minolta M2304
- To: hylafax-users@hylafax.org
- Subject: [hylafax-users] Fax Minolta M2304
- From: Olivier Saulnier <interchim.comp@interchim.com>
- Date: Thu, 10 Jul 2003 16:44:06 +0200
Hello,
I've some problems with a Minolta M2304 fax:
When i send it faxses i've the response: No response to EOP repeated.
People who use this fax received white page 3 times :-(
I send with an MultioTech 1432 ZDX modem, class 2.
This the return log:
Your facsimile job to 0,0169290925 failed because:
No response to EOP repeated 3 times; Giving up after 3 attempts
to send same page
---- Transcript of session follows ----
Jul 10 16:15:20.52: [31331]: SESSION BEGIN 00008846 169290925
Jul 10 16:15:20.52: [31331]: HylaFAX (tm) Version 4.1.5
Jul 10 16:15:20.52: [31331]: SEND FAX: JOB 6034 DEST 0,0169290925
COMMID 00008846 DEVICE '/dev/ttyS0'
Jul 10 16:15:20.52: [31331]: DELAY 75 ms
Jul 10 16:15:20.60: [31331]: DELAY 2600 ms
Jul 10 16:15:23.20: [31331]: DELAY 10 ms
Jul 10 16:15:23.21: [31331]: <-- [4:ATZ\r]
Jul 10 16:15:23.43: [31331]: --> [3:ATZ]
Jul 10 16:15:23.43: [31331]: --> [2:OK]
Jul 10 16:15:23.43: [31331]: DELAY 3000 ms
Jul 10 16:15:26.43: [31331]: <-- [5:ATE0\r]
Jul 10 16:15:26.60: [31331]: --> [4:ATE0]
Jul 10 16:15:26.60: [31331]: --> [2:OK]
Jul 10 16:15:26.60: [31331]: <-- [5:ATV1\r]
Jul 10 16:15:26.77: [31331]: --> [2:OK]
Jul 10 16:15:26.77: [31331]: <-- [5:ATQ0\r]
Jul 10 16:15:26.94: [31331]: --> [2:OK]
Jul 10 16:15:26.94: [31331]: <-- [7:ATS0=0\r]
Jul 10 16:15:27.11: [31331]: --> [2:OK]
Jul 10 16:15:27.11: [31331]: <-- [7:ATS8=2\r]
Jul 10 16:15:27.28: [31331]: --> [2:OK]
Jul 10 16:15:27.28: [31331]: <-- [8:ATS7=60\r]
Jul 10 16:15:27.45: [31331]: --> [2:OK]
Jul 10 16:15:27.45: [31331]: <-- [6:AT&E4\r]
Jul 10 16:15:27.62: [31331]: --> [2:OK]
Jul 10 16:15:27.62: [31331]: <-- [6:AT&D3\r]
Jul 10 16:15:27.79: [31331]: --> [2:OK]
Jul 10 16:15:27.79: [31331]: <-- [6:AT&C1\r]
Jul 10 16:15:27.96: [31331]: --> [2:OK]
Jul 10 16:15:27.96: [31331]: <-- [12:AT+FCLASS=2\r]
Jul 10 16:15:28.13: [31331]: --> [2:OK]
Jul 10 16:15:28.13: [31331]: <-- [10:AT+FTBC=0\r]
Jul 10 16:15:28.30: [31331]: --> [2:OK]
Jul 10 16:15:28.30: [31331]: <-- [10:AT+FBOR=0\r]
Jul 10 16:15:28.47: [31331]: --> [2:OK]
Jul 10 16:15:28.47: [31331]: <-- [13:AT+FPHCTO=30\r]
Jul 10 16:15:28.64: [31331]: --> [2:OK]
Jul 10 16:15:28.64: [31331]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Jul 10 16:15:28.82: [31331]: --> [2:OK]
Jul 10 16:15:28.82: [31331]: <-- [5:ATM0\r]
Jul 10 16:15:28.99: [31331]: --> [2:OK]
Jul 10 16:15:28.99: [31331]: <-- [12:AT+FCLASS=2\r]
Jul 10 16:15:29.26: [31331]: --> [2:OK]
Jul 10 16:15:29.26: [31331]: <-- [10:AT+FTBC=0\r]
Jul 10 16:15:29.53: [31331]: --> [2:OK]
Jul 10 16:15:29.53: [31331]: <-- [10:AT+FBOR=0\r]
Jul 10 16:15:29.80: [31331]: --> [2:OK]
Jul 10 16:15:29.80: [31331]: <-- [13:AT+FPHCTO=30\r]
Jul 10 16:15:30.07: [31331]: --> [2:OK]
Jul 10 16:15:30.07: [31331]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Jul 10 16:15:30.35: [31331]: --> [2:OK]
Jul 10 16:15:30.35: [31331]: <-- [20:AT+FLID="INTERCHIM"\r]
Jul 10 16:15:30.62: [31331]: --> [2:OK]
Jul 10 16:15:30.62: [31331]: DIAL 0,0169290925
Jul 10 16:15:30.62: [31331]: <-- [17:ATDT0,0169290925\r]
Jul 10 16:15:55.72: [31331]: --> [5:+FCON]
Jul 10 16:15:58.13: [31331]: --> [24:+FNSF:BC 53 01 60 11 01 ]
Jul 10 16:15:58.13: [31331]: REMOTE NSF "BC 53 01 60 11 01"
Jul 10 16:15:58.13: [31331]: NSF remote fax equipment: unknown
Jul 10 16:15:58.13: [31331]: --> [28:+FCSI:" 33 1 69290925"]
Jul 10 16:15:58.13: [31331]: REMOTE CSI "33 1 69290925"
Jul 10 16:15:58.13: [31331]: --> [21:+FDIS:1,3,0,2,1,2,0,0]
Jul 10 16:15:58.13: [31331]: --> [2:OK]
Jul 10 16:15:58.13: [31331]: REMOTE best rate 9600 bit/s
Jul 10 16:15:58.13: [31331]: REMOTE max page width 1728 pixels in 215 mm
Jul 10 16:15:58.13: [31331]: REMOTE max unlimited page length
Jul 10 16:15:58.13: [31331]: REMOTE best vres 7.7 line/mm
Jul 10 16:15:58.13: [31331]: REMOTE best format 2-D MR
Jul 10 16:15:58.13: [31331]: REMOTE supports T.30 Annex C, half duplex ECM
Jul 10 16:15:58.13: [31331]: REMOTE best 0 ms/scanline
Jul 10 16:15:58.13: [31331]: USE 9600 bit/s
Jul 10 16:15:58.13: [31331]: USE 0 ms/scanline
Jul 10 16:15:58.13: [31331]: SEND file "docq/doc6043.ps;40"
Jul 10 16:15:58.13: [31331]: USE page width 1728 pixels in 215 mm
Jul 10 16:15:58.13: [31331]: USE unlimited page length
Jul 10 16:15:58.13: [31331]: USE 3.85 line/mm
Jul 10 16:15:58.13: [31331]: USE 2-D MR
Jul 10 16:15:58.13: [31331]: <-- [24:AT+FDIS=0,3,0,2,1,0,0,0\r]
Jul 10 16:15:58.46: [31331]: --> [2:OK]
Jul 10 16:15:58.46: [31331]: <-- [7:AT+FDT\r]
Jul 10 16:16:04.17: [31331]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Jul 10 16:16:04.17: [31331]: --> [7:CONNECT]
Jul 10 16:16:04.17: [31331]: SEND wait for XON
Jul 10 16:16:04.17: [31331]: --> [1:]
Jul 10 16:16:04.17: [31331]: SEND begin page
Jul 10 16:16:15.69: [31331]: SENT 18482 bytes of data
Jul 10 16:16:15.69: [31331]: SEND end page
Jul 10 16:16:19.86: [31331]: --> [18:]
Jul 10 16:16:19.86: [31331]: --> [2:OK]
Jul 10 16:16:19.86: [31331]: SEND send EOP (no more pages or documents)
Jul 10 16:16:19.86: [31331]: <-- [9:AT+FET=2\r]
Jul 10 16:16:24.83: [31331]: --> [7:+FPTS:2]
Jul 10 16:16:24.83: [31331]: --> [2:OK]
Jul 10 16:16:24.83: [31331]: SEND recv RTN (retrain negative)
Jul 10 16:16:24.83: [31331]: <-- [24:AT+FDIS=0,2,0,2,1,0,0,0\r]
Jul 10 16:16:25.11: [31331]: --> [2:OK]
Jul 10 16:16:25.11: [31331]: <-- [7:AT+FDT\r]
Jul 10 16:16:30.79: [31331]: --> [21:+FDCS:0,2,0,2,1,0,0,0]
Jul 10 16:16:30.79: [31331]: --> [7:CONNECT]
Jul 10 16:16:30.79: [31331]: SEND wait for XON
Jul 10 16:16:30.79: [31331]: --> [1:]
Jul 10 16:16:30.79: [31331]: SEND begin page
Jul 10 16:16:45.89: [31331]: SENT 18482 bytes of data
Jul 10 16:16:45.89: [31331]: SEND end page
Jul 10 16:16:50.92: [31331]: --> [24:]
Jul 10 16:16:50.92: [31331]: --> [2:OK]
Jul 10 16:16:50.92: [31331]: SEND send EOP (no more pages or documents)
Jul 10 16:16:50.92: [31331]: <-- [9:AT+FET=2\r]
Jul 10 16:17:06.27: [31331]: --> [8:+FHNG:54]
Jul 10 16:17:06.27: [31331]: REMOTE HANGUP: No response to EOP
repeated 3 times (code 54)
Jul 10 16:17:06.27: [31331]: SEND: No response to EOP repeated 3
times; Giving up after 3 attempts to send same page
"docq/doc6043.ps;40", dirnum 0
Jul 10 16:17:06.27: [31331]: <-- [5:ATH0\r]
Jul 10 16:17:06.65: [31331]: --> [2:OK]
Jul 10 16:17:06.65: [31331]: SESSION END
---- Unsent job status ----
Destination: 0,0169290925
JobID: 6034
GroupID: 6034
Sender: OLS
Mailaddr: oliviers@mail.interchim.fr
CommID: 00008846
Submitted From: 200.0.0.97
Page Width: 194 (mm)
Page Length: 281 (mm)
Resolution: 98 (lpi)
Status: No response to EOP repeated 3 times; Giving up after
3 attempts to send same page
Dialogs: 3 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 3 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 1 (total pages to transmit)
Attempts: 3 (attempts to send current page)
Dirnum: 0 (directory of next page to send)
---- Documents submitted for transmission ----
The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.
Filename Size Type
docq/doc6043.ps 221863 PostScript
Best regards,
--
Olivier SAULNIER
Computer Manager
Interchim
213 AV. JF Kennedy
03100 MONTLUCON
Tel:04.70.03.88.55
Fax:04.70.03.82.60
www.interchim.com
-------------------------------------------------------------------------------------------
Cette communication (y compris les pieces jointes) est reservee a
l'usage exclusif du destinataire (des destinataires) et peut contenir
des informations privilegiees, confidentielles, exemptees de
divulgation selon la loi ou protegees par les droits d'auteur.
Si vous n'etes pas un destinataire, toute utilisation, divulgation,
distribution, reproduction, examen ou copie (totale ou partielle) est
non-autorisee et peut etre illegale.
Tout message electronique est susceptible d'alteration et son
integrite ne peut etre assuree.
Interchim decline toute responsabilite au titre de ce message s'il a
ete modifie ou falsifie. Si vous n'etes pas destinataire de ce
message, merci de le detruire immediatement et d'avertir l'expediteur
de 'erreur de distribution et de la destruction du message.
Merci.
This transmission (including any attachments) is intended solely for
the use of the addressee(s) and may contain confidential information
including trade secrets which are privileged, confidential, exempt rom
disclosure under applicable law and/or subject to copyright.
If you are not an intended recipient, any use, disclosure,
distribution, reproduction, review or copying (either whole or
partial) is unauthorized and may be unlawful.
E-mails are susceptible to alteration and their integrity cannot be
guaranteed. Interchimr shall not be liable for this e-mail if modified
or falsified. If you are not the intended recipient of this e-mail,
please delete it immediately from your system and notify the sender
of the wrong delivery and the mail deletion.
Thank you.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Follow-Ups:
- Re: [hylafax-users] Fax Minolta M2304
- From: Lee Howard
- Re: [hylafax-users] Fax Minolta M2304
- Prev by Date: [hylafax-users] See sent fax from any user
- Next by Date: Re: [hylafax-users] Debian upgrade broke Hylafax - followup withlog files
- Previous by thread: [hylafax-users] See sent fax from any user
- Next by thread: Re: [hylafax-users] Fax Minolta M2304
- Index(es):
Project hosted by iFAX Solutions