Re: [hylafax-users] Routing received faxes

[<ccvanmarion@lvm.nl>]

Hi Glyn,
I had the same problem and after installing MIMENCODE, my problem was
solved. mimencode is part of the package "metamail" and can be found on
RPMFIND (in case you use rpm's). Ik hope this will solve your problem.
BTW, my FaxDispath is as follows:
SENDTO=FaxMaster;
FILETYPE=tif;

Koos van Marion.




> A bit more on this. The tif file as an attachment is only 50bytes, so
> it seems it is attaching only the header? BTW, if you add ;; after
> FILETYPE it is ignored and it sends a PS attachment instead.
>
> Thanks I have tried that and I now get an attachment but not in a
> useable format. Very strange, because if I ftp the file via the
> supplied link in the email, the file can be opened, but not the same
> file (supposedly) sent via an attachment? Any ideas?
> TIA
> Glyn
>
> Glyn Davies said:
>> version 4.1.5-1rh9
>>
>> I have set up FaxDispatch to contain
>> SENDTO=FaxMaster;
>> FILETYPE=tif;
>>
>> Yet when a fax is received all I get is a mail with an ftp link
>> instead of the actual tif file as an attachment. In the messages file
>> I get "route to <unspecified>"
>>
>> What am I doing wrong? I did rtfm, but can't see where the problem is!
> I believe it should be FILETYPE=tif;;
>
>
> ______________________________________________
> "The information contained in this email is intended solely for the use
> of the individual or entity to whom it is addressed and others
> authorised to receive it.
>
> Cirrus Techvue is not liable for the proper, complete transmission of
> the information contained in this email, or any delay in its
> receipt, and does not warrant that the mail is virus-free."
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To subscribe/unsubscribe, click
>  http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail
>  sales@hylafax.org.*
>
> ______________________________________________
> "The information contained in this email is intended solely for the use
> of the individual or entity to whom it is addressed and others
> authorised to receive it.
>
> Cirrus Techvue is not liable for the proper, complete transmission of
> the information contained in this email, or any delay in its
> receipt, and does not warrant that the mail is virus-free."
>
> ______________________________________________
> "The information contained in this email is intended solely for the use
> of the individual or entity to whom it is addressed and others
> authorised to receive it.
>
> Cirrus Techvue is not liable for the proper, complete transmission  of
> the information contained in this email, or any delay in its
> receipt, and does not warrant that the mail is virus-free."
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To subscribe/unsubscribe, click
>  http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail
>  sales@hylafax.org.*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*