[hylafax-users] Long Distance Dial Access Codes

[Chris Watson <linux@globespan.ca>]

Hello,

The Hardware / Software
I am running Hylafax (v4) on Linux RedHat (v7.3 on a IBM 300 PL (333
mhz, 512 MB of RAM) with a
single Chase PCI-RAS Multi-Modem Card (please see
http://www.perle.com/products/prod_family/modem_cards/pci_ras.php for
more details). I have one telephone
line per modem.

Set up as follows: (Modem Port) --> (Phone number attached to physical
line)
ttyS4 --> 604 879 4444
ttyS5 --> 604 879 5555
ttyS6 --> 604 879 6666
ttyS7 --> 604 879 7777

The Problem: when I dial out long distance using either ttyS5, ttyS6 or
ttyS7, a 4 digit long distance
access code is required after the number is dialed. Where I am dialing
out from has 10 digit dialing even
for local calls. All long distance calls start with the country code (1)
first.

The Question:
How can I tell Hylafax to add the 4 digit long distance access code 5
seconds after the number has been
dialed only on 3 of the four ports. The first port does not have any
restriction mechanism in place. I
realize an easy solution would be to remove the access code, but that is
not possible.

Any help is appreciated.

Thanks,
Chris



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*