[hylafax-users] Waiting for modem to come ready.

[egon@premiernetworks.net]

Okay, I am desperate for any help anyone can offer. I know that this is a subject oft written about here as I have literally spent dozens of hours reading through all the archives to no avail.  

I am on SuSE 8.1. Hylafax 4.13-91.  I have tried multiple modems which include:

LT Winmodem (gone and module removed) Class 1
USR 56K External Faxmodem Class 2.0 (current)
Generic External 56K faxmodem Class 1

All of them receive faxes perfectly.  All of them without fail will send a fax and then return the "Waiting for modem to come ready." message and never change.  Will continue to send as many faxes as you like but will not receive again at all unless modem is reset manually.

I have read and re-read every message pertaining to this problem to no avail.  If ANYONE can offer any insite on this I would be forever grateful.  Please, anyone who can, help.

Egon

PS>

Here is a session log for a call using the USR modem dialing my phone (not fax).  The no carrier detected is fine. I have been using my phone as the taret number in order to quite wasting paper and toner in the fax machine.  If I direct it to a fax it works just fine (as in the fax comes through) but hangs at Waiting for modem to come ready.:
May 23 15:16:52.46: [20882]: SESSION BEGIN 00000071 131492219058
May 23 15:16:52.46: [20882]: HylaFAX (tm) Version 4.1.3
May 23 15:16:52.46: [20882]: SEND FAX: JOB 31 DEST 92219058 COMMID 00000071 DEVICE '/dev/ttyS1'
May 23 15:16:52.46: [20882]: MODEM set DTR OFF
May 23 15:16:52.46: [20882]: DELAY 75 ms
May 23 15:16:52.54: [20882]: MODEM set DTR ON
May 23 15:16:52.54: [20882]: DELAY 2600 ms
May 23 15:16:55.14: [20882]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
May 23 15:16:55.14: [20882]: MODEM flush i/o
May 23 15:16:55.14: [20882]: <-- [4:ATZ\r]
May 23 15:16:55.28: [20882]: --> [3:ATZ]
May 23 15:16:55.28: [20882]: --> [2:OK]
May 23 15:16:55.28: [20882]: DELAY 3000 ms
May 23 15:16:58.28: [20882]: <-- [5:ATE0\r]
May 23 15:16:58.42: [20882]: --> [4:ATE0]
May 23 15:16:58.42: [20882]: --> [2:OK]
May 23 15:16:58.42: [20882]: <-- [5:ATV1\r]
May 23 15:16:58.56: [20882]: --> [2:OK]
May 23 15:16:58.56: [20882]: <-- [7:ATQ0X4\r]
May 23 15:16:58.70: [20882]: --> [2:OK]
May 23 15:16:58.70: [20882]: <-- [7:ATS0=0\r]
May 23 15:16:58.84: [20882]: --> [2:OK]
May 23 15:16:58.84: [20882]: <-- [7:ATS8=2\r]
May 23 15:16:58.98: [20882]: --> [2:OK]
May 23 15:16:58.98: [20882]: <-- [8:ATS7=60\r]
May 23 15:16:59.12: [20882]: --> [2:OK]
May 23 15:16:59.12: [20882]: <-- [12:AT&H1&I0&R2\r]
May 23 15:16:59.26: [20882]: --> [2:OK]
May 23 15:16:59.26: [20882]: <-- [11:ATS13=1&D2\r]
May 23 15:16:59.40: [20882]: --> [2:OK]
May 23 15:16:59.40: [20882]: <-- [6:AT&C1\r]
May 23 15:16:59.54: [20882]: --> [2:OK]
May 23 15:16:59.54: [20882]: <-- [14:AT+FCLASS=2.0\r]
May 23 15:16:59.68: [20882]: --> [2:OK]
May 23 15:16:59.68: [20882]: <-- [9:AT+FLO=2\r]
May 23 15:16:59.82: [20882]: --> [2:OK]
May 23 15:16:59.82: [20882]: <-- [9:AT+FPP=0\r]
May 23 15:16:59.96: [20882]: --> [2:OK]
May 23 15:16:59.96: [20882]: <-- [9:AT+FBO=0\r]
May 23 15:17:00.10: [20882]: --> [2:OK]
May 23 15:17:00.10: [20882]: <-- [10:AT+FCT=30\r]
May 23 15:17:00.24: [20882]: --> [2:OK]
May 23 15:17:00.24: [20882]: <-- [15:AT+FNR=1,1,1,0\r]
May 23 15:17:00.38: [20882]: --> [2:OK]
May 23 15:17:00.38: [20882]: <-- [9:AT+FIE=0\r]
May 23 15:17:00.52: [20882]: --> [2:OK]
May 23 15:17:00.52: [20882]: <-- [9:AT+FBU=0\r]
May 23 15:17:00.66: [20882]: --> [2:OK]
May 23 15:17:00.66: [20882]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
May 23 15:17:00.81: [20882]: --> [2:OK]
May 23 15:17:00.81: [20882]: <-- [5:ATM0\r]
May 23 15:17:00.95: [20882]: --> [2:OK]
May 23 15:17:00.95: [20882]: STATE CHANGE: RUNNING -> SENDING
May 23 15:17:00.95: [20882]: MODEM input buffering enabled
May 23 15:17:00.95: [20882]: Apply DialString rules to "92219058"
May 23 15:17:00.95: [20882]: --> return result "92219058"
May 23 15:17:00.95: [20882]: <-- [14:AT+FCLASS=2.0\r]
May 23 15:17:01.19: [20882]: --> [2:OK]
May 23 15:17:01.19: [20882]: <-- [9:AT+FLO=2\r]
May 23 15:17:01.43: [20882]: --> [2:OK]
May 23 15:17:01.43: [20882]: <-- [9:AT+FPP=0\r]
May 23 15:17:01.67: [20882]: --> [2:OK]
May 23 15:17:01.67: [20882]: <-- [9:AT+FBO=0\r]
May 23 15:17:01.91: [20882]: --> [2:OK]
May 23 15:17:01.91: [20882]: <-- [10:AT+FCT=30\r]
May 23 15:17:02.15: [20882]: --> [2:OK]
May 23 15:17:02.15: [20882]: <-- [15:AT+FNR=1,1,1,0\r]
May 23 15:17:02.39: [20882]: --> [2:OK]
May 23 15:17:02.39: [20882]: <-- [9:AT+FIE=0\r]
May 23 15:17:02.63: [20882]: --> [2:OK]
May 23 15:17:02.63: [20882]: <-- [9:AT+FBU=0\r]
May 23 15:17:02.87: [20882]: --> [2:OK]
May 23 15:17:02.87: [20882]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
May 23 15:17:03.12: [20882]: --> [2:OK]
May 23 15:17:03.12: [20882]: <-- [22:AT+FLI="NothingSetup"\r]
May 23 15:17:03.37: [20882]: --> [2:OK]
May 23 15:17:03.37: [20882]: DIAL 92219058
May 23 15:17:03.37: [20882]: <-- [13:ATDT92219058\r]
May 23 15:17:59.22: [20882]: --> [10:NO CARRIER]
May 23 15:17:59.22: [20882]: SEND FAILED: JOB 31 DEST 92219058 ERR No carrier detected
May 23 15:17:59.22: [20882]: <-- [5:ATH0\r]
May 23 15:17:59.46: [20882]: --> [2:OK]
May 23 15:17:59.46: [20882]: MODEM set DTR OFF
May 23 15:17:59.46: [20882]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
May 23 15:17:59.46: [20882]: SESSION END
data:/var/spool/fax/log #

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*