HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] MultiTech ZPX: Unspecified Phase D to SpecificRemote Machine



On 2003.05.07 16:29 Frank Peters wrote:

> When I inquired about the status of 1.28, Multitech informed me that
> 1.28 will not be relesed for the MT5634ZPX-PCI-V92.
> 
> Here is their original message:
> 
> > The latest and current firmware available is 125p for the
> MT5634ZPX_PCI_V.92
> > modem. The only modem that currently has a 128c rev firmware is an
> external
> > MT5634ZBA/V_V.92 modem. I am not aware of this firmware being
> updated to 128
> > for the MT5634ZPX_PCI_V.92.
> 
> Maybe this will change in the future if enough users complain about
> reception
> problems.
> 
> I don't ordinary receive faxes, but in the transmit mode the
> MT5634ZPX_PCI_V.92
> with HylaFAX works very well at the V.34 transfer rates.

MultiTech supports their hardware.  Start a support case with them, and 
it will get resolved.  Anyway, "Unspecified Phase D" errors in Class 2 
are almost certainly a firmware problem.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions