Re: [hylafax-users] MultiTech ZPX: Unspecified Phase D toSpecificRemote Machine

[Bill Binko <bill-keyword-hylafax.afeacb@binko.net>]

Howard,

	Thanks for the quick response.  I am indeed talking about the
MT5634ZPX-PCI-V92.  However, when I look at the MultiTech Firmware Page:
http://www.multitech.com/SUPPORT/MultiModemZPX/firmware.asp
I only see version 1.25p as the latest.

I addition, I have a "how on earth could I not thought of that"
question: how do I update the firmware under Linux?

ATI3 gives:
	LT V.92 1.0 MT5634ZPX-PCI-V92 Internal Data/Fax/Voice Modem
Version 1.25p

Where can I get this 1.28 (and how do I apply it?)

Thanks
Bill

> -----Original Message-----
> From: Lee Howard [mailto:faxguy@howardsilvan.com] 
> Sent: Wednesday, May 07, 2003 2:28 PM
> To: Bill Binko
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] MultiTech ZPX: Unspecified Phase 
> D to SpecificRemote Machine
> 
> 
> On 2003.05.07 11:17 Bill Binko wrote:
> > 
> > Hi all,
> > 	We now have our fax server up and running, and are for the most
> > part very happy.  However, we have one specific sender that seems to
> > be
> > blowing up upon reception.  I have a call in to get the information
> > about the machine type etc, but we are receiving some good 
> faxes from
> > them.  One thing to note is that we are using Class 2.1 on the
> > MultiTechs, and that the failures are all at 24000 bps.
> 
> I assume you're talking about the MT5634ZPX-PCI-V92.
> 
> What firmware revision are you using?  Please make sure it is 1.28, 
> otherwise you'll get lots of errors with Class 2.1 unless you disable 
> V.34 and MMR.
> 
> Lee.
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*