Re: [hylafax-users] Error parsing "+FRM" ?????

To: <hylafax-users@hylafax.org>
Subject: Re: [hylafax-users] Error parsing "+FRM" ?????
From: "Stuart Herd" <sherd@muscletech.com>
Date: Fri, 25 Apr 2003 08:39:58 -0400
there is a bug in the USR firmware >
you need to add the patch at
http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=378 and recompile
_
_______________________________________________________________________________________________


                                                                                                                                                      
                    "Seok See Wai                                                                                                                     
                    (Rachel)"                    To:     <hylafax-users@hylafax.org>                                                                  
                    <rachelcy@hotmail.com>       cc:                                                                                                  
                    Sent by:                     Subject:     [hylafax-users] Error parsing "+FRM" ?????                                              
                    hylafax-users-bounce@h                                                                                                            
                    ylafax.org                                                                                                                        
                                                                                                                                                      
                                                                                                                                                      
                    04/25/2003 12:55 AM                                                                                                               
                                                                                                                                                      




Hi, need help urgently...

I'm using hylafax-4.1.5-1rh8 on redhat 8, below is my config.ttyS0:

CountryCode:   6
AreaCode:   03
FAXNumber:  +92749062
LongDistancePrefix: 1
InternationalPrefix: 011
DialStringRules:   etc/dialrules
#ServerTracing:    1
ServerTracing:  0xFFF
#ServerTracing:    1+2+3
SessionTracing:    11
RecvFileMode:   0600
LogFileMode:   0600
DeviceMode:  0600
RingsBeforeAnswer: 1
SpeakerVolume:  off
GettyArgs:  "-h %l dx_%s"
LocalIdentifier:   "NothingSetup"
TagLineFont:   etc/lutRS18.pcf
TagLineFormat:  "From %%l|%c|Page %%P of %%T"
MaxRecvPages:   25
AdaptiveAnswer:    yes
AnswerRotary:   "fax"
ModemType:  Class1  # use this to supply a hint
ModemRate:  19200   # rate for DCE-DTE communication
ModemFlowControl:  xonxoff      # default
ModemNoFlowCmd:    AT&K0        # setup no flow control
ModemHardFlowCmd:  AT&K3        # setup hardware flow control
ModemSoftFlowCmd:  AT&K4        # setup software flow control
ModemSetupDTRCmd:  AT&D2        # setup so DTR drop resets modem
ModemSetupDCDCmd:  AT&C1        # setup so DCD reflects carrier (or not)
ModemMfrQueryCmd:  !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd:  ATI3    # product information
ModemDialCmd:   ATDT%s     # T for tone dialing
ModemAnswerCmd:    AT+FCLASS=1;A        # default is to answer as fax
ModemSoftResetCmd:      ATZ             # do soft reset of modem
ModemSoftResetCmdDelay: 300    # pause after soft reset
ModemDTRDropDelay: 50


and my class1 file:
ModemType:  Class1  # use this to supply a hint
Class1Cmd:  AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd:  AT+FTS=7     # command to stop and wait before PPM
Class1TCFWaitCmd:  AT+FTS=7     # command to stop and wait before TCF
Class1EOPWaitCmd:  AT+FTS=9     # command to stop and wait before EOP
Class1MsgRecvHackCmd:   "" # command to avoid +FCERROR before image
Class1TCFResponseDelay: 75      # 75ms delay between recv TCF & response
Class1SendMsgDelay: 75     # 75ms delay after training
Class1SwitchingCmd: AT+FRS=7    # silence between HDLC recv and trans
Class1TrainingRecovery: 1500            # 1.5sec delay after training
failure
Class1RecvAbortOK: 200     # wait 200ms for abort response
Class1FrameOverhead: 4     # 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer:   40000           # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10    # max 10% of data may be non-zero
Class1TCFMinRun:   1000    # min run is 2/3rds of TCF duration

I was testing it usng a normal call-in, when i hear the fax tone, i
assuming it works,
but after a few times (say bout 3-5 times) calling to the hylafax, my modem
couldn't initialise
again, and the  /var/log/messages file showing some entry like below:

Jan  1 19:51:02 fileserver FaxGetty[2869]: MODEM ROCKWELL RC288DPi/EM3900
External Modem Patch 9-11 NVM + SIN + MALY + THAI
Jan  1 19:51:02 fileserver FaxGetty[2869]: <-- [5:ATM0\r]
Jan  1 19:51:02 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:02 fileserver FaxGetty[2869]: STATE CHANGE: RECEIVING ->
RUNNING (timeout 30)
Jan  1 19:51:02 fileserver FaxGetty[2869]: MODEM input buffering disabled
Jan  1 19:51:06 fileserver FaxGetty[2869]: STATE CHANGE: RUNNING ->
LISTENING
Jan  1 19:51:06 fileserver FaxGetty[2869]: MODEM input buffering enabled
Jan  1 19:51:06 fileserver FaxGetty[2869]: --> [4:RING]
Jan  1 19:51:06 fileserver FaxGetty[2869]: STATE CHANGE: LISTENING ->
ANSWERING
Jan  1 19:51:06 fileserver FaxGetty[2869]: MODEM input buffering enabled
Jan  1 19:51:13 fileserver FaxGetty[2869]: ANSWER: FAX CONNECTION  DEVICE
'/dev/ttyS0'
Jan  1 19:51:52 fileserver FaxGetty[2869]: RECV FAX (00000061): from 603
2273 5158, page 1 in 0:32, INF, 3.85 line/mm, 2-D MR, 9600 bit/s
Jan  1 19:51:52 fileserver FaxGetty[2869]: RECV FAX (00000061):
recvq/fax00060.tif from 603 2273 5158, route to <unspecified>, 1 pages in
0:39
Jan  1 19:51:53 fileserver FaxGetty[2869]: RECV FAX: bin/faxrcvd
"recvq/fax00060.tif" "ttyS0" "00000061" "" "" ""
Jan  1 19:51:54 fileserver FaxGetty[2869]: <-- [5:ATH0\r]
Jan  1 19:51:55 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:55 fileserver FaxGetty[2869]: MODEM set DTR OFF
Jan  1 19:51:55 fileserver FaxGetty[2869]: MODEM set DTR OFF
Jan  1 19:51:55 fileserver FaxGetty[2869]: DELAY 50 ms
Jan  1 19:51:55 fileserver FaxGetty[2869]: MODEM set DTR ON
Jan  1 19:51:55 fileserver FaxGetty[2869]: DELAY 2600 ms
Jan  1 19:51:58 fileserver FaxGetty[2869]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFF
Jan  1 19:51:58 fileserver FaxGetty[2869]: DELAY 10 ms
Jan  1 19:51:58 fileserver FaxGetty[2869]: MODEM flush i/o
Jan  1 19:51:58 fileserver FaxGetty[2869]: <-- [4:ATZ\r]
Jan  1 19:51:58 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:58 fileserver FaxGetty[2869]: DELAY 300 ms
Jan  1 19:51:58 fileserver FaxGetty[2869]: <-- [5:ATE0\r]
Jan  1 19:51:58 fileserver FaxGetty[2869]: --> [4:ATE0]
Jan  1 19:51:58 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:58 fileserver FaxGetty[2869]: <-- [5:ATV1\r]
Jan  1 19:51:58 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:58 fileserver FaxGetty[2869]: <-- [5:ATQ0\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [7:ATS0=0\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [7:ATS8=2\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [8:ATS7=60\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [6:AT&K4\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [6:AT&D2\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [6:AT&C1\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [12:AT+FCLASS=?\r]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [14:0,1,1.0,2,8,10]
Jan  1 19:51:59 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:51:59 fileserver FaxGetty[2869]: MODEM Supports "Data"
Jan  1 19:51:59 fileserver FaxGetty[2869]: MODEM Supports "Class 1"
Jan  1 19:51:59 fileserver FaxGetty[2869]: MODEM Supports "Class 2"
Jan  1 19:51:59 fileserver FaxGetty[2869]: MODEM Supports "Class 1.0"
Jan  1 19:51:59 fileserver FaxGetty[2869]: MODEM Supports "Voice"
Jan  1 19:51:59 fileserver FaxGetty[2869]: <-- [12:AT+FCLASS=1\r]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM: Mfr Rockwell
Jan  1 19:52:00 fileserver FaxGetty[2869]: <-- [5:ATI3\r]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [21:EM3900 External Modem]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [34:Patch 9-11 NVM + SIN +
MALY + THAI]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM: Model RC288DPi
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM: Revision EM3900 External
Modem Patch 9-11 NVM + SIN + MALY + THAI
Jan  1 19:52:00 fileserver FaxGetty[2869]: <-- [9:AT+FTM=?\r]
Jan  1 19:52:00 fileserver FaxGetty[2869]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [2:OK]
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 3.85 line/mm
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 7.7 line/mm
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 2400 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 4800 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 7200 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 9600 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 12000 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 14400 bit/s
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports page width 1728
pixels in 215 mm
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports page width 2048
pixels in 255 mm
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports page width 2432
pixels in 303 mm
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports A4 page length
(297 mm)
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports B4 page length
(364 mm)
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports unlimited page
length
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 1-D MR
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 2-D MR
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 0 ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 5 ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 10 ms, 5
ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 10 ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 20 ms, 10
ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 20 ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 40 ms, 20
ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM Supports 40 ms/scanline
Jan  1 19:52:00 fileserver FaxGetty[2869]: <-- [9:AT+FRM=?\r]
Jan  1 19:52:00 fileserver FaxGetty[2869]: --> [4:RING]
Jan  1 19:52:00 fileserver FaxGetty[2869]: Error parsing "+FRM" query
response: "OK"
Jan  1 19:52:00 fileserver FaxGetty[2869]: MODEM set DTR OFF
Jan  1 19:52:00 fileserver FaxGetty[2869]: /dev/ttyS0: Can not initialize
modem.
Jan  1 19:52:00 fileserver FaxGetty[2869]: STATE CHANGE: RECEIVING ->
MODEMWAIT (timeout 30)

Please help!!!

Rachel Seok



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
Follow-Ups:
- Re: [hylafax-users] Error parsing "+FRM" ?????
  - From: rAcHeL^cY
References:
- [hylafax-users] Error parsing "+FRM" ?????
  - From: Seok See Wai (Rachel)
Prev by Date: [hylafax-users] Seldbauer pci : expected page not received.
Next by Date: Re: [hylafax-users] No communication at all
Previous by thread: [hylafax-users] Error parsing "+FRM" ?????
Next by thread: Re: [hylafax-users] Error parsing "+FRM" ?????
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions