 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Hylafax Problems
- To: <hylafax-users@hylafax.org>
- Subject: [hylafax-users] Hylafax Problems
- From: "Fernando" <fernando@officer.com.br>
- Date: Thu, 16 Jan 2003 17:49:39 -0300
Hi there,
I need help again. I´ve been trying a lot of things,
like modem strings, changes in config.ttyS0, etc, to fix these problems
but until now, sometimes, I got these problems in the attachments.
I
also change to another machine and now I have an IBM server. I had a terrible HP
Brio. My modem is an USRobotics 56k External, Hylafax last version and Red Hat
8.
Thks in advanced!!
<>-------------------<>
Fernando Barros
Depto Internet
Officer
Distribuidora
tel: 55 11 5014 - 7093
<>-------------------<>
- To: fernando@officer.com.br
- Subject: facsimile not received
- From: The HylaFAX Receive Agent <fax@localhost.localdomain>
- Date: Thu, 16 Jan 2003 17:39:14 -0200
An attempt to receive facsimile on ttyS0 failed because: T.30 T2 timeout, expected page not received ---- Transcript of session follows ---- Jan 16 17:38:07.87: [ 800]: SESSION BEGIN 00000389 551150142001 Jan 16 17:38:07.87: [ 800]: HylaFAX (tm) Version 4.1.5 Jan 16 17:38:07.87: [ 800]: <-- [13:AT+FCLASS=1A\r] Jan 16 17:38:13.15: [ 800]: --> [7:CONNECT] Jan 16 17:38:13.15: [ 800]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Jan 16 17:38:13.15: [ 800]: RECV FAX: begin Jan 16 17:38:13.17: [ 800]: --> [7:CONNECT] Jan 16 17:38:15.13: [ 800]: --> [2:OK] Jan 16 17:38:15.13: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:38:18.23: [ 800]: --> [0:] Jan 16 17:38:18.23: [ 800]: MODEM <Empty line> Jan 16 17:38:18.24: [ 800]: --> [2:OK] Jan 16 17:38:18.24: [ 800]: DELAY 1500 ms Jan 16 17:38:19.74: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:38:19.78: [ 800]: --> [7:CONNECT] Jan 16 17:38:19.80: [ 800]: --> [7:CONNECT] Jan 16 17:38:21.86: [ 800]: --> [2:OK] Jan 16 17:38:21.86: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:38:22.72: [ 800]: --> [7:CONNECT] Jan 16 17:38:24.12: [ 800]: --> [2:OK] Jan 16 17:38:24.12: [ 800]: REMOTE TSI "27 35441512" Jan 16 17:38:24.12: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:38:24.14: [ 800]: --> [7:CONNECT] Jan 16 17:38:24.49: [ 800]: --> [2:OK] Jan 16 17:38:24.49: [ 800]: REMOTE wants 9600 bit/s Jan 16 17:38:24.49: [ 800]: REMOTE wants page width 1728 pixels in 215 mm Jan 16 17:38:24.49: [ 800]: REMOTE wants unlimited page length Jan 16 17:38:24.49: [ 800]: REMOTE wants 7.7 line/mm Jan 16 17:38:24.49: [ 800]: REMOTE wants 1-D MR Jan 16 17:38:24.49: [ 800]: RECV training at v.29 9600 bit/s Jan 16 17:38:24.49: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 17:38:24.83: [ 800]: --> [7:CONNECT] Jan 16 17:38:26.41: [ 800]: RECV: TCF 1892 bytes, 4% non-zero, 1803 zero-run Jan 16 17:38:26.41: [ 800]: --> [10:NO CARRIER] Jan 16 17:38:26.41: [ 800]: DELAY 75 ms Jan 16 17:38:26.49: [ 800]: TRAINING succeeded Jan 16 17:38:26.49: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:38:26.68: [ 800]: --> [7:CONNECT] Jan 16 17:38:27.86: [ 800]: --> [2:OK] Jan 16 17:38:27.86: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 17:38:29.43: [ 800]: --> [7:CONNECT] Jan 16 17:38:29.43: [ 800]: RECV: begin page Jan 16 17:39:03.21: [ 800]: RECV: 838 total lines, 0 bad lines, 0 consecutive bad lines Jan 16 17:39:03.22: [ 800]: RECV: end page Jan 16 17:39:03.22: [ 800]: --> [10:NO CARRIER] Jan 16 17:39:03.22: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:39:08.37: [ 800]: --> [7:CONNECT] Jan 16 17:39:13.38: [ 800]: --> [2:OK] Jan 16 17:39:13.38: [ 800]: RECV FAX (00000389): recvq/fax00389.tif from 27 35441512, route to <unspecified>, 0 pages in 1:00 Jan 16 17:39:13.38: [ 800]: RECV FAX: T.30 T2 timeout, expected page not received Jan 16 17:39:13.38: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:39:13.42: [ 800]: --> [7:CONNECT] Jan 16 17:39:14.60: [ 800]: --> [2:OK] Jan 16 17:39:14.60: [ 800]: RECV FAX (00000389): session with 27 35441512 terminated abnormally: T.30 T2 timeout, expected page not received Jan 16 17:39:14.60: [ 800]: RECV FAX: bin/faxrcvd "recvq/fax00389.tif" "ttyS0" "00000389" "T.30 T2 timeout, expected page not received" "" ""
- To: fernando@officer.com.br
- Subject: facsimile not received
- From: The HylaFAX Receive Agent <fax@localhost.localdomain>
- Date: Thu, 16 Jan 2003 17:10:22 -0200
An attempt to receive facsimile on ttyS0 failed because: T.30 T2 timeout, expected page not received ---- Transcript of session follows ---- Jan 16 17:08:33.75: [ 800]: SESSION BEGIN 00000385 551150142001 Jan 16 17:08:33.75: [ 800]: HylaFAX (tm) Version 4.1.5 Jan 16 17:08:33.75: [ 800]: <-- [13:AT+FCLASS=1A\r] Jan 16 17:08:39.03: [ 800]: --> [7:CONNECT] Jan 16 17:08:39.03: [ 800]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Jan 16 17:08:39.03: [ 800]: RECV FAX: begin Jan 16 17:08:39.06: [ 800]: --> [7:CONNECT] Jan 16 17:08:41.02: [ 800]: --> [2:OK] Jan 16 17:08:41.02: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:08:44.12: [ 800]: --> [0:] Jan 16 17:08:44.12: [ 800]: MODEM <Empty line> Jan 16 17:08:44.13: [ 800]: --> [2:OK] Jan 16 17:08:44.13: [ 800]: DELAY 1500 ms Jan 16 17:08:45.63: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:08:45.66: [ 800]: --> [7:CONNECT] Jan 16 17:08:45.69: [ 800]: --> [7:CONNECT] Jan 16 17:08:47.75: [ 800]: --> [2:OK] Jan 16 17:08:47.75: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:08:48.35: [ 800]: --> [7:CONNECT] Jan 16 17:08:50.02: [ 800]: --> [2:OK] Jan 16 17:08:50.02: [ 800]: REMOTE TSI "27 35441512" Jan 16 17:08:50.02: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:08:50.04: [ 800]: --> [7:CONNECT] Jan 16 17:08:50.37: [ 800]: --> [2:OK] Jan 16 17:08:50.37: [ 800]: REMOTE wants 9600 bit/s Jan 16 17:08:50.37: [ 800]: REMOTE wants page width 1728 pixels in 215 mm Jan 16 17:08:50.37: [ 800]: REMOTE wants unlimited page length Jan 16 17:08:50.37: [ 800]: REMOTE wants 7.7 line/mm Jan 16 17:08:50.37: [ 800]: REMOTE wants 1-D MR Jan 16 17:08:50.37: [ 800]: RECV training at v.29 9600 bit/s Jan 16 17:08:50.37: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 17:08:50.71: [ 800]: --> [7:CONNECT] Jan 16 17:08:52.29: [ 800]: RECV: TCF 1893 bytes, 4% non-zero, 1804 zero-run Jan 16 17:08:52.29: [ 800]: --> [10:NO CARRIER] Jan 16 17:08:52.29: [ 800]: DELAY 75 ms Jan 16 17:08:52.37: [ 800]: TRAINING succeeded Jan 16 17:08:52.37: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:08:52.57: [ 800]: --> [7:CONNECT] Jan 16 17:08:53.74: [ 800]: --> [2:OK] Jan 16 17:08:53.74: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 17:08:55.30: [ 800]: --> [7:CONNECT] Jan 16 17:08:55.30: [ 800]: RECV: begin page Jan 16 17:10:12.80: [ 800]: RECV: 2032 total lines, 0 bad lines, 0 consecutive bad lines Jan 16 17:10:12.80: [ 800]: RECV: end page Jan 16 17:10:12.80: [ 800]: --> [10:NO CARRIER] Jan 16 17:10:12.80: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:10:15.15: [ 800]: --> [7:CONNECT] Jan 16 17:10:16.12: [ 800]: --> [5:ERROR] Jan 16 17:10:16.12: [ 800]: MODEM Command error Jan 16 17:10:16.12: [ 800]: FCS error Jan 16 17:10:16.12: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 17:10:16.14: [ 800]: --> [7:CONNECT] Jan 16 17:10:21.14: [ 800]: --> [2:OK] Jan 16 17:10:21.14: [ 800]: RECV FAX (00000385): recvq/fax00385.tif from 27 35441512, route to <unspecified>, 0 pages in 1:42 Jan 16 17:10:21.14: [ 800]: RECV FAX: T.30 T2 timeout, expected page not received Jan 16 17:10:21.14: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 17:10:21.18: [ 800]: --> [7:CONNECT] Jan 16 17:10:22.35: [ 800]: --> [2:OK] Jan 16 17:10:22.36: [ 800]: RECV FAX (00000385): session with 27 35441512 terminated abnormally: T.30 T2 timeout, expected page not received Jan 16 17:10:22.36: [ 800]: RECV FAX: bin/faxrcvd "recvq/fax00385.tif" "ttyS0" "00000385" "T.30 T2 timeout, expected page not received" "" ""
- To: fernando@officer.com.br
- Subject: facsimile not received
- From: The HylaFAX Receive Agent <fax@localhost.localdomain>
- Date: Thu, 16 Jan 2003 15:48:08 -0200
An attempt to receive facsimile on ttyS0 failed because: COMREC received DCN ---- Transcript of session follows ---- Jan 16 15:46:28.75: [ 800]: SESSION BEGIN 00000369 551150142001 Jan 16 15:46:28.75: [ 800]: HylaFAX (tm) Version 4.1.5 Jan 16 15:46:28.75: [ 800]: <-- [13:AT+FCLASS=1A\r] Jan 16 15:46:34.03: [ 800]: --> [7:CONNECT] Jan 16 15:46:34.03: [ 800]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Jan 16 15:46:34.03: [ 800]: RECV FAX: begin Jan 16 15:46:34.05: [ 800]: --> [7:CONNECT] Jan 16 15:46:36.01: [ 800]: --> [2:OK] Jan 16 15:46:36.01: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 15:46:39.11: [ 800]: --> [0:] Jan 16 15:46:39.11: [ 800]: MODEM <Empty line> Jan 16 15:46:39.12: [ 800]: --> [2:OK] Jan 16 15:46:39.12: [ 800]: DELAY 1500 ms Jan 16 15:46:40.62: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 15:46:40.66: [ 800]: --> [7:CONNECT] Jan 16 15:46:40.68: [ 800]: --> [7:CONNECT] Jan 16 15:46:42.74: [ 800]: --> [2:OK] Jan 16 15:46:42.74: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 15:46:43.83: [ 800]: --> [7:CONNECT] Jan 16 15:46:45.16: [ 800]: --> [2:OK] Jan 16 15:46:45.16: [ 800]: REMOTE TSI "3141 9522" Jan 16 15:46:45.16: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 15:46:45.17: [ 800]: --> [7:CONNECT] Jan 16 15:46:45.48: [ 800]: --> [2:OK] Jan 16 15:46:45.48: [ 800]: REMOTE wants 9600 bit/s Jan 16 15:46:45.48: [ 800]: REMOTE wants page width 1728 pixels in 215 mm Jan 16 15:46:45.48: [ 800]: REMOTE wants unlimited page length Jan 16 15:46:45.48: [ 800]: REMOTE wants 3.85 line/mm Jan 16 15:46:45.48: [ 800]: REMOTE wants 2-D MR Jan 16 15:46:45.48: [ 800]: RECV training at v.29 9600 bit/s Jan 16 15:46:45.48: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 15:46:46.06: [ 800]: --> [7:CONNECT] Jan 16 15:46:47.64: [ 800]: RECV: TCF 1893 bytes, 4% non-zero, 1811 zero-run Jan 16 15:46:47.64: [ 800]: --> [10:NO CARRIER] Jan 16 15:46:47.64: [ 800]: DELAY 75 ms Jan 16 15:46:47.72: [ 800]: TRAINING succeeded Jan 16 15:46:47.72: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 15:46:47.92: [ 800]: --> [7:CONNECT] Jan 16 15:46:49.09: [ 800]: --> [2:OK] Jan 16 15:46:49.09: [ 800]: <-- [10:AT+FRM=96\r] Jan 16 15:46:49.75: [ 800]: --> [7:CONNECT] Jan 16 15:46:49.75: [ 800]: RECV: begin page Jan 16 15:48:05.50: [ 800]: RECV: 2446 total lines, 0 bad lines, 0 consecutive bad lines Jan 16 15:48:05.50: [ 800]: RECV: end page Jan 16 15:48:05.50: [ 800]: --> [10:NO CARRIER] Jan 16 15:48:05.50: [ 800]: <-- [9:AT+FRH=3\r] Jan 16 15:48:06.24: [ 800]: --> [7:CONNECT] Jan 16 15:48:07.28: [ 800]: --> [2:OK] Jan 16 15:48:07.28: [ 800]: RECV recv DCN Jan 16 15:48:07.28: [ 800]: RECV FAX (00000369): recvq/fax00369.tif from 3141 9522, route to <unspecified>, 0 pages in 1:33 Jan 16 15:48:07.28: [ 800]: RECV FAX: COMREC received DCN Jan 16 15:48:07.28: [ 800]: <-- [9:AT+FTH=3\r] Jan 16 15:48:07.47: [ 800]: --> [7:CONNECT] Jan 16 15:48:08.65: [ 800]: --> [2:OK] Jan 16 15:48:08.65: [ 800]: RECV FAX (00000369): session with 3141 9522 terminated abnormally: COMREC received DCN Jan 16 15:48:08.65: [ 800]: RECV FAX: bin/faxrcvd "recvq/fax00369.tif" "ttyS0" "00000369" "COMREC received DCN" "" ""
- Prev by Date: Re: [hylafax-users] new user - faxaddmodem problems
- Next by Date: Re: [hylafax-users] MS Office to PS filter
- Previous by thread: [hylafax-users] My log
- Next by thread: [hylafax-users] Problem with email to fax
- Index(es):
Project hosted by iFAX Solutions