 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Help! No response to EOP repeated 3 times
- To: Paul Lorah <paul@macmaverick.net>
- Subject: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- From: dobos_s@IBCnet.hu
- Cc: hylafax-users@hylafax.org, faxguy@howardsilvan.com
- Date: Wed, 8 Jan 2003 10:55:09 +0100
Hi!
I have the same problem some months ago. I wrote to the list my solution:
dont allow to v.29 with canon peers. (use v.17)
I modified the source to accomplish this.
Others have tested the faxnumbers I have problems with them, but they have
no problems.
So it seems like a modem-specific problem: what kind of modem have You?
My is a SpeedCom+ external 56k modem based on rockwell chipset.
Dobos Sandor
IBCnet Hungary Ltd.
Paul Lorah
<paul@macmaverick.net> To: hylafax-users@hylafax.org
Sent by: cc: Lee Howard <faxguy@howardsilvan.com>
hylafax-users-bounce@h Subject: Re: [hylafax-users] Help! No response to EOP repeated 3
ylafax.org times
2003.01.07 22:21
Here is the full log. I appreciate all the feedback! Sorry to flood the
list.
Paul
Jan 07 14:18:11.10: [ 2448]: SESSION BEGIN 00000001 16106103378290
Jan 07 14:18:11.10: [ 2448]: HylaFAX (tm) Version 4.1.5
Jan 07 14:18:11.10: [ 2448]: SEND FAX: JOB 1 DEST 6103378290 COMMID
00000001 DEVICE '/dev/ttyS6'
Jan 07 14:18:11.10: [ 2448]: DELAY 75 ms
Jan 07 14:18:11.18: [ 2448]: DELAY 2600 ms
Jan 07 14:18:13.78: [ 2448]: DELAY 10 ms
Jan 07 14:18:13.79: [ 2448]: <-- [4:ATZ\r]
Jan 07 14:18:13.86: [ 2448]: --> [2:OK]
Jan 07 14:18:13.86: [ 2448]: DELAY 3000 ms
Jan 07 14:18:16.86: [ 2448]: <-- [5:ATE0\r]
Jan 07 14:18:17.01: [ 2448]: --> [4:ATE0]
Jan 07 14:18:17.01: [ 2448]: --> [2:OK]
Jan 07 14:18:17.01: [ 2448]: <-- [5:ATV1\r]
Jan 07 14:18:17.16: [ 2448]: --> [2:OK]
Jan 07 14:18:17.16: [ 2448]: <-- [5:ATQ0\r]
Jan 07 14:18:17.31: [ 2448]: --> [2:OK]
Jan 07 14:18:17.31: [ 2448]: <-- [7:ATS0=0\r]
Jan 07 14:18:17.46: [ 2448]: --> [2:OK]
Jan 07 14:18:17.46: [ 2448]: <-- [7:ATS8=2\r]
Jan 07 14:18:17.60: [ 2448]: --> [2:OK]
Jan 07 14:18:17.60: [ 2448]: <-- [8:ATS7=60\r]
Jan 07 14:18:17.75: [ 2448]: --> [2:OK]
Jan 07 14:18:17.75: [ 2448]: <-- [12:AT+FCLASS=1\r]
Jan 07 14:18:17.90: [ 2448]: --> [2:OK]
Jan 07 14:18:17.90: [ 2448]: <-- [5:ATM0\r]
Jan 07 14:18:17.91: [ 2448]: --> [2:OK]
Jan 07 14:18:17.91: [ 2448]: <-- [12:AT+FCLASS=1\r]
Jan 07 14:18:18.03: [ 2448]: --> [2:OK]
Jan 07 14:18:18.03: [ 2448]: DIAL 6103378290
Jan 07 14:18:18.03: [ 2448]: <-- [15:ATDT6103378290\r]
Jan 07 14:18:46.80: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:48.19: [ 2448]: --> [2:OK]
Jan 07 14:18:48.19: [ 2448]: REMOTE NSF "00 00 11 80 00 80 48 00 5B
00 80 80 C0 04 01 02 EB"
Jan 07 14:18:48.19: [ 2448]: NSF remote fax equipment: Canon Faxphone B640
Jan 07 14:18:48.19: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:18:48.21: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:48.49: [ 2448]: --> [2:OK]
Jan 07 14:18:48.49: [ 2448]: REMOTE best rate 9600 bit/s
Jan 07 14:18:48.49: [ 2448]: REMOTE max page width 1728 pixels in 215 mm
Jan 07 14:18:48.49: [ 2448]: REMOTE max unlimited page length
Jan 07 14:18:48.49: [ 2448]: REMOTE best vres 7.7 line/mm
Jan 07 14:18:48.49: [ 2448]: REMOTE best format 2-D MMR
Jan 07 14:18:48.49: [ 2448]: REMOTE supports T.30 Annex A, ECM
Jan 07 14:18:48.49: [ 2448]: REMOTE best 20 ms/scanline
Jan 07 14:18:48.49: [ 2448]: USE 9600 bit/s
Jan 07 14:18:48.49: [ 2448]: USE 20 ms/scanline
Jan 07 14:18:48.49: [ 2448]: SEND file "docq/doc1.ps;30"
Jan 07 14:18:48.49: [ 2448]: USE page width 1728 pixels in 215 mm
Jan 07 14:18:48.49: [ 2448]: USE unlimited page length
Jan 07 14:18:48.49: [ 2448]: USE 3.85 line/mm
Jan 07 14:18:48.49: [ 2448]: USE 1-D MR
Jan 07 14:18:48.49: [ 2448]: SEND training at v.29 9600 bit/s
Jan 07 14:18:48.49: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:18:48.60: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:48.60: [ 2448]: <-- data [23]
Jan 07 14:18:48.60: [ 2448]: <-- data [2]
Jan 07 14:18:50.30: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:50.30: [ 2448]: <-- data [6]
Jan 07 14:18:50.30: [ 2448]: <-- data [2]
Jan 07 14:18:50.60: [ 2448]: --> [2:OK]
Jan 07 14:18:50.60: [ 2448]: <-- [9:AT+FTS=7\r]
Jan 07 14:18:50.69: [ 2448]: --> [2:OK]
Jan 07 14:18:50.69: [ 2448]: <-- [10:AT+FTM=96\r]
Jan 07 14:18:50.96: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:50.96: [ 2448]: <-- data [1024]
Jan 07 14:18:50.96: [ 2448]: <-- data [776]
Jan 07 14:18:50.96: [ 2448]: <-- data [2]
Jan 07 14:18:52.37: [ 2448]: --> [2:OK]
Jan 07 14:18:52.37: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:18:52.62: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:53.63: [ 2448]: --> [2:OK]
Jan 07 14:18:53.63: [ 2448]: TRAINING succeeded
Jan 07 14:18:53.63: [ 2448]: DELAY 75 ms
Jan 07 14:18:53.71: [ 2448]: <-- [10:AT+FTM=96\r]
Jan 07 14:18:53.99: [ 2448]: --> [7:CONNECT]
Jan 07 14:18:53.99: [ 2448]: SEND begin page
Jan 07 14:18:53.99: [ 2448]: <-- data [1028]
Jan 07 14:18:53.99: [ 2448]: <-- data [1024]
Jan 07 14:18:53.99: [ 2448]: <-- data [1030]
Jan 07 14:18:53.99: [ 2448]: <-- data [1031]
Jan 07 14:18:53.99: [ 2448]: <-- data [1032]
Jan 07 14:18:55.47: [ 2448]: <-- data [1027]
Jan 07 14:18:55.47: [ 2448]: <-- data [1024]
Jan 07 14:18:56.89: [ 2448]: <-- data [1028]
Jan 07 14:18:58.31: [ 2448]: <-- data [1030]
Jan 07 14:18:58.31: [ 2448]: <-- data [1025]
Jan 07 14:18:59.69: [ 2448]: <-- data [1031]
Jan 07 14:18:59.69: [ 2448]: <-- data [1028]
Jan 07 14:19:01.07: [ 2448]: <-- data [1033]
Jan 07 14:19:01.07: [ 2448]: <-- data [1052]
Jan 07 14:19:02.45: [ 2448]: <-- data [1028]
Jan 07 14:19:02.45: [ 2448]: <-- data [1035]
Jan 07 14:19:03.87: [ 2448]: <-- data [1025]
Jan 07 14:19:03.87: [ 2448]: <-- data [1034]
Jan 07 14:19:05.28: [ 2448]: <-- data [1026]
Jan 07 14:19:06.70: [ 2448]: <-- data [1024]
Jan 07 14:19:06.70: [ 2448]: <-- data [1027]
Jan 07 14:19:08.12: [ 2448]: <-- data [1026]
Jan 07 14:19:08.12: [ 2448]: <-- data [1029]
Jan 07 14:19:09.50: [ 2448]: <-- data [1027]
Jan 07 14:19:09.50: [ 2448]: <-- data [1031]
Jan 07 14:19:10.88: [ 2448]: <-- data [268]
Jan 07 14:19:10.88: [ 2448]: SENT 25868 bytes of data
Jan 07 14:19:10.88: [ 2448]: <-- data [1029]
Jan 07 14:19:12.30: [ 2448]: <-- data [1025]
Jan 07 14:19:12.30: [ 2448]: <-- data [1027]
Jan 07 14:19:13.68: [ 2448]: <-- data [1029]
Jan 07 14:19:13.68: [ 2448]: <-- data [1028]
Jan 07 14:19:15.06: [ 2448]: <-- data [1033]
Jan 07 14:19:15.06: [ 2448]: <-- data [1033]
Jan 07 14:19:16.48: [ 2448]: <-- data [1030]
Jan 07 14:19:16.48: [ 2448]: <-- data [1026]
Jan 07 14:19:17.90: [ 2448]: <-- data [1032]
Jan 07 14:19:17.90: [ 2448]: <-- data [1025]
Jan 07 14:19:19.32: [ 2448]: <-- data [1027]
Jan 07 14:19:19.32: [ 2448]: <-- data [932]
Jan 07 14:19:20.74: [ 2448]: SENT 13220 bytes of data
Jan 07 14:19:20.74: [ 2448]: SEND 1D RTC
Jan 07 14:19:20.74: [ 2448]: <-- data [29]
Jan 07 14:19:20.74: [ 2448]: <-- data [2]
Jan 07 14:19:20.74: [ 2448]: SEND end page
Jan 07 14:19:23.18: [ 2448]: --> [2:OK]
Jan 07 14:19:23.18: [ 2448]: <-- [9:AT+FTS=9\r]
Jan 07 14:19:23.30: [ 2448]: --> [2:OK]
Jan 07 14:19:23.30: [ 2448]: SEND send EOP (no more pages or documents)
Jan 07 14:19:23.30: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:19:23.36: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:23.36: [ 2448]: <-- data [3]
Jan 07 14:19:23.36: [ 2448]: <-- data [2]
Jan 07 14:19:24.58: [ 2448]: --> [2:OK]
Jan 07 14:19:24.58: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:19:24.78: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:25.85: [ 2448]: --> [2:OK]
Jan 07 14:19:25.85: [ 2448]: SEND recv RTN (retrain negative)
Jan 07 14:19:25.85: [ 2448]: SEND training at v.29 7200 bit/s
Jan 07 14:19:25.85: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:19:25.96: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:25.96: [ 2448]: <-- data [23]
Jan 07 14:19:25.96: [ 2448]: <-- data [2]
Jan 07 14:19:27.63: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:27.63: [ 2448]: <-- data [6]
Jan 07 14:19:27.63: [ 2448]: <-- data [2]
Jan 07 14:19:27.93: [ 2448]: --> [2:OK]
Jan 07 14:19:27.93: [ 2448]: <-- [9:AT+FTS=7\r]
Jan 07 14:19:28.02: [ 2448]: --> [2:OK]
Jan 07 14:19:28.02: [ 2448]: <-- [10:AT+FTM=72\r]
Jan 07 14:19:28.30: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:28.30: [ 2448]: <-- data [1024]
Jan 07 14:19:28.30: [ 2448]: <-- data [326]
Jan 07 14:19:28.30: [ 2448]: <-- data [2]
Jan 07 14:19:29.70: [ 2448]: --> [2:OK]
Jan 07 14:19:29.70: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:19:29.94: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:30.95: [ 2448]: --> [2:OK]
Jan 07 14:19:30.95: [ 2448]: TRAINING succeeded
Jan 07 14:19:30.95: [ 2448]: DELAY 75 ms
Jan 07 14:19:31.03: [ 2448]: <-- [10:AT+FTM=72\r]
Jan 07 14:19:31.31: [ 2448]: --> [7:CONNECT]
Jan 07 14:19:31.31: [ 2448]: SEND begin page
Jan 07 14:19:31.31: [ 2448]: <-- data [1028]
Jan 07 14:19:31.31: [ 2448]: <-- data [1025]
Jan 07 14:19:31.31: [ 2448]: <-- data [1032]
Jan 07 14:19:31.31: [ 2448]: <-- data [1030]
Jan 07 14:19:31.31: [ 2448]: <-- data [1032]
Jan 07 14:19:32.71: [ 2448]: <-- data [1025]
Jan 07 14:19:34.04: [ 2448]: <-- data [1025]
Jan 07 14:19:35.37: [ 2448]: <-- data [1032]
Jan 07 14:19:35.37: [ 2448]: <-- data [1026]
Jan 07 14:19:36.70: [ 2448]: <-- data [1027]
Jan 07 14:19:38.03: [ 2448]: <-- data [1030]
Jan 07 14:19:39.36: [ 2448]: <-- data [1032]
Jan 07 14:19:39.36: [ 2448]: <-- data [1052]
Jan 07 14:19:40.70: [ 2448]: <-- data [1031]
Jan 07 14:19:42.03: [ 2448]: <-- data [1036]
Jan 07 14:19:43.36: [ 2448]: <-- data [1026]
Jan 07 14:19:44.73: [ 2448]: <-- data [1032]
Jan 07 14:19:44.73: [ 2448]: <-- data [1026]
Jan 07 14:19:46.06: [ 2448]: <-- data [949]
Jan 07 14:19:47.39: [ 2448]: SENT 19381 bytes of data
Jan 07 14:19:47.39: [ 2448]: <-- data [1028]
Jan 07 14:19:48.72: [ 2448]: <-- data [1028]
Jan 07 14:19:48.72: [ 2448]: <-- data [1029]
Jan 07 14:19:50.05: [ 2448]: <-- data [1031]
Jan 07 14:19:51.39: [ 2448]: <-- data [1028]
Jan 07 14:19:52.72: [ 2448]: <-- data [1026]
Jan 07 14:19:52.72: [ 2448]: <-- data [1025]
Jan 07 14:19:54.05: [ 2448]: <-- data [1031]
Jan 07 14:19:55.38: [ 2448]: <-- data [1028]
Jan 07 14:19:56.71: [ 2448]: <-- data [1034]
Jan 07 14:19:56.71: [ 2448]: <-- data [1036]
Jan 07 14:19:58.05: [ 2448]: <-- data [1027]
Jan 07 14:19:59.38: [ 2448]: <-- data [1031]
Jan 07 14:20:00.70: [ 2448]: <-- data [1026]
Jan 07 14:20:00.70: [ 2448]: <-- data [1027]
Jan 07 14:20:02.03: [ 2448]: <-- data [992]
Jan 07 14:20:03.36: [ 2448]: SENT 16351 bytes of data
Jan 07 14:20:03.36: [ 2448]: SEND 1D RTC
Jan 07 14:20:03.36: [ 2448]: <-- data [29]
Jan 07 14:20:03.36: [ 2448]: <-- data [2]
Jan 07 14:20:03.36: [ 2448]: SEND end page
Jan 07 14:20:06.97: [ 2448]: --> [2:OK]
Jan 07 14:20:06.97: [ 2448]: <-- [9:AT+FTS=9\r]
Jan 07 14:20:07.08: [ 2448]: --> [2:OK]
Jan 07 14:20:07.08: [ 2448]: SEND send EOP (no more pages or documents)
Jan 07 14:20:07.08: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:20:07.13: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:07.13: [ 2448]: <-- data [3]
Jan 07 14:20:07.13: [ 2448]: <-- data [2]
Jan 07 14:20:08.36: [ 2448]: --> [2:OK]
Jan 07 14:20:08.36: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:20:08.58: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:09.59: [ 2448]: --> [2:OK]
Jan 07 14:20:09.59: [ 2448]: SEND recv RTN (retrain negative)
Jan 07 14:20:09.59: [ 2448]: SEND training at v.27ter 4800 bit/s
Jan 07 14:20:09.59: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:20:09.70: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:09.70: [ 2448]: <-- data [23]
Jan 07 14:20:09.70: [ 2448]: <-- data [2]
Jan 07 14:20:11.40: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:11.40: [ 2448]: <-- data [6]
Jan 07 14:20:11.40: [ 2448]: <-- data [2]
Jan 07 14:20:11.70: [ 2448]: --> [2:OK]
Jan 07 14:20:11.70: [ 2448]: <-- [9:AT+FTS=7\r]
Jan 07 14:20:11.79: [ 2448]: --> [2:OK]
Jan 07 14:20:11.79: [ 2448]: <-- [10:AT+FTM=48\r]
Jan 07 14:20:12.73: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:12.73: [ 2448]: <-- data [900]
Jan 07 14:20:12.73: [ 2448]: <-- data [2]
Jan 07 14:20:14.14: [ 2448]: --> [2:OK]
Jan 07 14:20:14.14: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:20:14.37: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:15.41: [ 2448]: --> [2:OK]
Jan 07 14:20:15.41: [ 2448]: TRAINING succeeded
Jan 07 14:20:15.41: [ 2448]: DELAY 75 ms
Jan 07 14:20:15.49: [ 2448]: <-- [10:AT+FTM=48\r]
Jan 07 14:20:16.43: [ 2448]: --> [7:CONNECT]
Jan 07 14:20:16.43: [ 2448]: SEND begin page
Jan 07 14:20:16.43: [ 2448]: <-- data [1028]
Jan 07 14:20:16.43: [ 2448]: <-- data [1027]
Jan 07 14:20:16.43: [ 2448]: <-- data [1033]
Jan 07 14:20:16.43: [ 2448]: <-- data [1031]
Jan 07 14:20:16.43: [ 2448]: <-- data [1029]
Jan 07 14:20:18.02: [ 2448]: <-- data [1024]
Jan 07 14:20:19.55: [ 2448]: <-- data [1028]
Jan 07 14:20:21.07: [ 2448]: <-- data [1030]
Jan 07 14:20:22.59: [ 2448]: <-- data [1025]
Jan 07 14:20:24.12: [ 2448]: <-- data [1033]
Jan 07 14:20:25.65: [ 2448]: <-- data [1028]
Jan 07 14:20:27.17: [ 2448]: <-- data [1042]
Jan 07 14:20:28.69: [ 2448]: <-- data [649]
Jan 07 14:20:30.22: [ 2448]: SENT 12920 bytes of data
Jan 07 14:20:30.22: [ 2448]: <-- data [1030]
Jan 07 14:20:31.74: [ 2448]: <-- data [1034]
Jan 07 14:20:33.26: [ 2448]: <-- data [1034]
Jan 07 14:20:34.85: [ 2448]: <-- data [1026]
Jan 07 14:20:36.45: [ 2448]: <-- data [1024]
Jan 07 14:20:37.97: [ 2448]: <-- data [1028]
Jan 07 14:20:39.49: [ 2448]: <-- data [1029]
Jan 07 14:20:41.01: [ 2448]: <-- data [1028]
Jan 07 14:20:42.54: [ 2448]: <-- data [1031]
Jan 07 14:20:44.07: [ 2448]: <-- data [1029]
Jan 07 14:20:45.60: [ 2448]: <-- data [1025]
Jan 07 14:20:47.12: [ 2448]: <-- data [1027]
Jan 07 14:20:48.64: [ 2448]: <-- data [623]
Jan 07 14:20:50.16: [ 2448]: SENT 12905 bytes of data
Jan 07 14:20:50.16: [ 2448]: <-- data [1032]
Jan 07 14:20:51.69: [ 2448]: <-- data [1034]
Jan 07 14:20:53.22: [ 2448]: <-- data [1032]
Jan 07 14:20:54.75: [ 2448]: <-- data [1027]
Jan 07 14:20:56.27: [ 2448]: <-- data [1032]
Jan 07 14:20:57.78: [ 2448]: <-- data [1025]
Jan 07 14:20:59.30: [ 2448]: <-- data [911]
Jan 07 14:20:59.30: [ 2448]: SENT 7052 bytes of data
Jan 07 14:20:59.30: [ 2448]: SEND 1D RTC
Jan 07 14:20:59.30: [ 2448]: <-- data [29]
Jan 07 14:21:00.82: [ 2448]: <-- data [2]
Jan 07 14:21:00.82: [ 2448]: SEND end page
Jan 07 14:21:03.39: [ 2448]: --> [2:OK]
Jan 07 14:21:03.39: [ 2448]: <-- [9:AT+FTS=9\r]
Jan 07 14:21:03.50: [ 2448]: --> [2:OK]
Jan 07 14:21:03.50: [ 2448]: SEND send EOP (no more pages or documents)
Jan 07 14:21:03.50: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:21:03.55: [ 2448]: --> [7:CONNECT]
Jan 07 14:21:03.55: [ 2448]: <-- data [3]
Jan 07 14:21:03.55: [ 2448]: <-- data [2]
Jan 07 14:21:04.77: [ 2448]: --> [2:OK]
Jan 07 14:21:04.77: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:21:07.87: [ 2448]: --> [0:]
Jan 07 14:21:07.87: [ 2448]: MODEM <Empty line>
Jan 07 14:21:07.87: [ 2448]: <-- data [1]
Jan 07 14:21:07.88: [ 2448]: --> [2:]
Jan 07 14:21:07.88: [ 2448]: --> [2:OK]
Jan 07 14:21:07.88: [ 2448]: SEND send EOP (no more pages or documents)
Jan 07 14:21:07.88: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:21:07.93: [ 2448]: --> [7:CONNECT]
Jan 07 14:21:07.93: [ 2448]: <-- data [3]
Jan 07 14:21:07.93: [ 2448]: <-- data [2]
Jan 07 14:21:09.16: [ 2448]: --> [2:OK]
Jan 07 14:21:09.16: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:21:12.26: [ 2448]: --> [0:]
Jan 07 14:21:12.26: [ 2448]: MODEM <Empty line>
Jan 07 14:21:12.26: [ 2448]: <-- data [1]
Jan 07 14:21:12.27: [ 2448]: --> [2:]
Jan 07 14:21:12.27: [ 2448]: --> [2:OK]
Jan 07 14:21:12.27: [ 2448]: SEND send EOP (no more pages or documents)
Jan 07 14:21:12.27: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:21:12.32: [ 2448]: --> [7:CONNECT]
Jan 07 14:21:12.32: [ 2448]: <-- data [3]
Jan 07 14:21:12.32: [ 2448]: <-- data [2]
Jan 07 14:21:13.52: [ 2448]: --> [2:OK]
Jan 07 14:21:13.52: [ 2448]: <-- [9:AT+FRH=3\r]
Jan 07 14:21:16.62: [ 2448]: --> [0:]
Jan 07 14:21:16.62: [ 2448]: MODEM <Empty line>
Jan 07 14:21:16.62: [ 2448]: <-- data [1]
Jan 07 14:21:16.63: [ 2448]: --> [2:]
Jan 07 14:21:16.63: [ 2448]: --> [2:OK]
Jan 07 14:21:16.63: [ 2448]: No response to MPS or EOP repeated 3 tries
Jan 07 14:21:16.63: [ 2448]: <-- [9:AT+FTH=3\r]
Jan 07 14:21:16.68: [ 2448]: --> [7:CONNECT]
Jan 07 14:21:16.68: [ 2448]: <-- data [3]
Jan 07 14:21:16.68: [ 2448]: <-- data [2]
Jan 07 14:21:17.91: [ 2448]: --> [2:OK]
Jan 07 14:21:17.91: [ 2448]: <-- [5:ATH0\r]
Jan 07 14:21:18.03: [ 2448]: --> [2:OK]
Jan 07 14:21:18.03: [ 2448]: SESSION END
>On 2003.01.07 12:55 Paul Lorah wrote:
>>>On 2003.01.07 05:37 Paul Lorah wrote:
>>>
>>>>Jan 14 09:28:14.66: [ 414]: <-- [12:AT+FCLASS=2\r]
>>>>Jan 14 09:28:14.81: [ 414]: --> [2:OK]
>>>
>>>Try Class 1, if available.
>>
>>Jan 07 14:18:17.75: [ 2448]: --> [2:OK]
>>Jan 07 14:18:17.75: [ 2448]: <-- [12:AT+FCLASS=1\r]
>>
>>...
>>
>>Jan 07 14:21:16.63: [ 2448]: --> [2:OK]
>>Jan 07 14:21:16.63: [ 2448]: No response to MPS or EOP repeated 3 tries
>>Jan 07 14:21:16.63: [ 2448]: <-- [9:AT+FTH=3\r]
>>Jan 07 14:21:16.68: [ 2448]: --> [7:CONNECT]
>>
>>
>>Similar error message with Class 1. The output was different, but
>>still distorted and garbled.
>
>The full log would be useful.
>
>Lee.
--
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Prev by Date: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Next by Date: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Previous by thread: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Next by thread: Re: [hylafax-users] Help! No response to EOP repeated 3 times
- Index(es):
Project hosted by iFAX Solutions