HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] Fax Receive Problem
Dear Experts,
I had set up hylafax and had been running it without
any problems for a couple of days when I came across a
problem. I was receiving a 20 page or so fax and it
received some of the fax and then it stopped receiving
data. The fax server remained in the receiving state.
HylaFAX scheduler on quintus.encoremusic.com: Running
Modem ttyS0 (+1.260.632.6808): Receiving from
"<UNSPECIFIED>"
I've included part of the log file for that fax. There
is a line that says "MODEM <timeout>" and I was
wondering if there was some timeout variable I could
change in the config files that would help with this.
I'm using Hylafax 4.1.3 with a USR 56K
Faxmodem.
Oct 29 16:11:18.69: [ 141]: RECV recv MPS (more
pages, same document)
Oct 29 16:11:18.69: [ 141]: <-- [9:AT+FRS=7\r]
Oct 29 16:11:19.46: [ 141]: --> [2:OK]
Oct 29 16:11:19.46: [ 141]: <-- [9:AT+FTH=3\r]
Oct 29 16:11:19.66: [ 141]: --> [7:CONNECT]
Oct 29 16:11:19.66: [ 141]: RECV send MCF (message
confirmation)
Oct 29 16:11:19.66: [ 141]: RECV FAX (00000261): from
2196324034, page 11 in 0:55, INF, 7.7 line/mm, 2-D MR,
14400 bit/s
Oct 29 16:11:19.66: [ 141]: <-- data [3]
Oct 29 16:11:19.66: [ 141]: <-- data [2]
Oct 29 16:11:20.83: [ 141]: --> [2:OK]
Oct 29 16:11:20.83: [ 141]: <-- [11:AT+FRM=146\r]
Oct 29 16:11:21.47: [ 141]: --> [7:CONNECT]
Oct 29 16:11:21.47: [ 141]: RECV: begin page
Oct 29 16:12:49.11: [ 141]: RECV: 2133 total lines,
26 bad lines, 4 consecutive bad lines
Oct 29 16:12:49.11: [ 141]: RECV: end page
Oct 29 16:12:49.11: [ 141]: --> [10:NO CARRIER]
Oct 29 16:12:49.11: [ 141]: <-- [9:AT+FRH=3\r]
Oct 29 16:12:49.26: [ 141]: --> [7:CONNECT]
Oct 29 16:12:50.25: [ 141]: --> [2:OK]
Oct 29 16:12:50.25: [ 141]: RECV recv MPS (more
pages, same document)
Oct 29 16:12:50.25: [ 141]: <-- [9:AT+FRS=7\r]
Oct 29 16:12:50.36: [ 141]: --> [2:OK]
Oct 29 16:12:50.36: [ 141]: <-- [9:AT+FTH=3\r]
Oct 29 16:13:20.36: [ 141]: MODEM <Timeout>
Oct 29 16:13:20.36: [ 141]: RECV send MCF (message
confirmation)
Oct 29 16:13:20.36: [ 141]: RECV FAX (00000261): from
2196324034, page 12 in 2:01, INF, 7.7 line/mm, 2-D MR,
14400 bit/s
Oct 29 16:13:20.36: [ 141]: <-- data [3]
Oct 29 16:13:20.36: [ 141]: <-- data [2]
Oct 29 16:13:22.91: [ 141]: --> [5:ÿ?]
Any help would be greatly appreciated,
Chad
__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*