Re: [hylafax-users] Hylafax 4.1.3, OSX 10.2.1 (Jaguar), Mac G3B&W, Internal Modem

[Bob Beaton <bob@keyengine.com>]

Chris & Lee,

Thank you for the very helpful and prompt comments. Changing the handshake
mode from xon/xoff to rts/cts and, then, restarting faxgetty worked nicely.

For completeness in the list archive, I simply edited one line in my
/var/spool/hylafax/etc/config.cu.modem file to be:

ModemFlowControl:       rtscts     # hw flow control (xonxoff is default)

With this change and faxgetty restart (kill -HUP <faxgetty PID>), I was able
to use sendfax without a problem. I have not tested receiving a fax yet,
however.

Many thanks again!
Bob

On 10/2/02 9:37 AM, "cbain" <cbain@acordex.com> wrote:

> Bob,
> 
> I have gotten Hylafax 4.1.2 to work using the internal modem on Mac OS X
> 10.1.5 and 10.2. I configured the modem as an internal modem using class
> 2 with the additional changes in the config.cu.modem files as follows:
> 
> ModemFlowControl:       rtscts          # was XON/XOFF flow control
> ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
> Class2RecvDataTrigger:  "\022"          # character sent to modem to
> start recv
> Class2XmitWaitForXON:   no              # if true, wait for XON before
> send
> 
> 
> The Class2XmitWaitForXON when set to yes caused the modem to hang when
> sending, the
> ModemFlowControl was xonxoff and this caused errors in sending and
> receiving faxes. I am not sure if the other two changes made any
> difference, I just made them base on the differences between the
> RockWell-K56 and the class 2 modem. With these configuration changes I
> can now send and recieve faxes fine with the internal modem.
> 
> Chris
> 
>> Hi,
>> 
>> I compiled and installed the latest HylaFAX on my G3 B&W, which is running
>> the latest Mac OSX. Everything went fine (thanks to the on-line HOW-TO and
>> list comments!!!) until I sent my first fax. As documented in the list
>> archives, there appears to be some time-out problems with the Apple internal
>> modem. I set mine up as a Class 2 modem, using /dev/cu.modem.
>> 
>> I'm wondering of any fixes have been found for this configuration. And, more
>> generally, I'm wondering if HylaFAX really works with the latest OSX. If so,
>> with what configurations? I have an old 28.8 SupraFaxModem--should I be
>> using that instead of the internal Apple (Rockwell) modem?
>> 
>> I've attached my log print-out just in case someone's interested and far
>> more intelligent than me with finding my actual problem.
>> 
>> Many thanks for any comments!
>> 
>> Bob 
>> 
>> ****
>> 
>> Oct 02 01:19:53.55: [  789]: SESSION BEGIN 00000004 13055774370
>> Oct 02 01:19:53.55: [  789]: HylaFAX (tm) Version 4.1.3
>> Oct 02 01:19:53.55: [  789]: SEND FAX: JOB 2 DEST 1-305-577-4370 COMMID
>> 00000004 DEVICE '/dev/cu.modem'
>> Oct 02 01:19:53.55: [  789]: DELAY 75 ms
>> Oct 02 01:19:53.63: [  789]: DELAY 2600 ms
>> Oct 02 01:19:57.51: [  789]: <-- [4:ATZ\r]
>> Oct 02 01:20:00.67: [  789]: --> [2:OK]
>> Oct 02 01:20:00.67: [  789]: DELAY 3000 ms
>> Oct 02 01:20:03.67: [  789]: <-- [5:ATE0\r]
>> Oct 02 01:20:03.72: [  789]: --> [4:ATE0]
>> Oct 02 01:20:03.72: [  789]: --> [2:OK]
>> Oct 02 01:20:03.72: [  789]: <-- [5:ATV1\r]
>> Oct 02 01:20:03.76: [  789]: --> [2:OK]
>> Oct 02 01:20:03.76: [  789]: <-- [5:ATQ0\r]
>> Oct 02 01:20:03.81: [  789]: --> [2:OK]
>> Oct 02 01:20:03.81: [  789]: <-- [7:ATS0=0\r]
>> Oct 02 01:20:03.85: [  789]: --> [2:OK]
>> Oct 02 01:20:03.85: [  789]: <-- [7:ATS8=2\r]
>> Oct 02 01:20:03.89: [  789]: --> [2:OK]
>> Oct 02 01:20:03.90: [  789]: <-- [8:ATS7=60\r]
>> Oct 02 01:20:03.95: [  789]: --> [2:OK]
>> Oct 02 01:20:03.95: [  789]: <-- [6:AT&K4\r]
>> Oct 02 01:20:03.98: [  789]: --> [2:OK]
>> Oct 02 01:20:03.98: [  789]: <-- [6:AT&D3\r]
>> Oct 02 01:20:04.03: [  789]: --> [2:OK]
>> Oct 02 01:20:04.03: [  789]: <-- [6:AT&C1\r]
>> Oct 02 01:20:04.07: [  789]: --> [2:OK]
>> Oct 02 01:20:04.07: [  789]: <-- [12:AT+FCLASS=2\r]
>> Oct 02 01:20:04.12: [  789]: --> [2:OK]
>> Oct 02 01:20:04.12: [  789]: <-- [10:AT+FTBC=0\r]
>> Oct 02 01:20:04.16: [  789]: --> [2:OK]
>> Oct 02 01:20:04.16: [  789]: <-- [10:AT+FBOR=0\r]
>> Oct 02 01:20:04.20: [  789]: --> [2:OK]
>> Oct 02 01:20:04.20: [  789]: <-- [13:AT+FPHCTO=30\r]
>> Oct 02 01:20:04.25: [  789]: --> [2:OK]
>> Oct 02 01:20:04.25: [  789]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
>> Oct 02 01:20:04.29: [  789]: --> [2:OK]
>> Oct 02 01:20:04.29: [  789]: <-- [5:ATM0\r]
>> Oct 02 01:20:04.34: [  789]: --> [2:OK]
>> Oct 02 01:20:04.36: [  789]: <-- [12:AT+FCLASS=2\r]
>> Oct 02 01:20:04.48: [  789]: --> [2:OK]
>> Oct 02 01:20:04.48: [  789]: <-- [10:AT+FTBC=0\r]
>> Oct 02 01:20:04.63: [  789]: --> [2:OK]
>> Oct 02 01:20:04.63: [  789]: <-- [10:AT+FBOR=0\r]
>> Oct 02 01:20:04.80: [  789]: --> [2:OK]
>> Oct 02 01:20:04.80: [  789]: <-- [13:AT+FPHCTO=30\r]
>> Oct 02 01:20:04.95: [  789]: --> [2:OK]
>> Oct 02 01:20:04.95: [  789]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
>> Oct 02 01:20:05.24: [  789]: --> [2:OK]
>> Oct 02 01:20:05.24: [  789]: <-- [18:AT+FLID="HF Shop"\r]
>> Oct 02 01:20:05.39: [  789]: --> [2:OK]
>> Oct 02 01:20:05.39: [  789]: DIAL 13055774370
>> Oct 02 01:20:05.39: [  789]: <-- [16:ATDT13055774370\r]
>> Oct 02 01:20:23.28: [  789]: --> [5:+FCON]
>> Oct 02 01:20:25.31: [  789]: --> [22:+FDIS: 1,5,0,2,1,0,0,0]
>> Oct 02 01:20:25.31: [  789]: --> [2:OK]
>> Oct 02 01:20:25.31: [  789]: REMOTE best rate 14400 bit/s
>> Oct 02 01:20:25.31: [  789]: REMOTE max page width 1728 pixels in 215 mm
>> Oct 02 01:20:25.31: [  789]: REMOTE max unlimited page length
>> Oct 02 01:20:25.31: [  789]: REMOTE best vres 7.7 line/mm
>> Oct 02 01:20:25.31: [  789]: REMOTE best format 2-D MR
>> Oct 02 01:20:25.32: [  789]: REMOTE best 0 ms/scanline
>> Oct 02 01:20:25.32: [  789]: USE 14400 bit/s
>> Oct 02 01:20:25.32: [  789]: USE 0 ms/scanline
>> Oct 02 01:20:25.32: [  789]: SEND file "docq/doc3.ps;31"
>> Oct 02 01:20:25.32: [  789]: USE page width 1728 pixels in 215 mm
>> Oct 02 01:20:25.32: [  789]: USE unlimited page length
>> Oct 02 01:20:25.32: [  789]: USE 7.7 line/mm
>> Oct 02 01:20:25.32: [  789]: USE 1-D MR
>> Oct 02 01:20:25.32: [  789]: <-- [24:AT+FDIS=1,5,0,2,0,0,0,0\r]
>> Oct 02 01:20:25.48: [  789]: --> [2:OK]
>> Oct 02 01:20:25.48: [  789]: <-- [7:AT+FDT\r]
>> Oct 02 01:20:33.62: [  789]: --> [22:+FDCS: 1,5,0,2,0,0,0,0]
>> Oct 02 01:20:33.62: [  789]: --> [7:CONNECT]
>> Oct 02 01:20:33.62: [  789]: SEND wait for XON
>> Oct 02 01:20:43.62: [  789]: <-- [6:AT+FK\r]
>> Oct 02 01:21:13.62: [  789]: MODEM <Timeout>
>> Oct 02 01:21:13.62: [  789]: SEND: Communication failure during Phase B/C;
>> Giving up after 3 attempts to send same page "docq/doc3.ps;31", dirnum 0
>> Oct 02 01:21:13.63: [  789]: <-- [5:ATH0\r]
>> Oct 02 01:21:13.78: [  789]: --> [9:+FHNG: 50]
>> Oct 02 01:21:13.78: [  789]: REMOTE HANGUP: Unspecified Transmit Phase D
>> error, including +FPHCTO timeout between data and +FET command (code 50)
>> Oct 02 01:21:15.60: [  789]: --> [2:OK]
>> Oct 02 01:21:15.85: [  789]: SESSION END
>> 
>> ____________________ HylaFAX(tm) Users Mailing List _______________________
>>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>>  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*