HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Callled number fax routing




 It all depends on your NT1. it has the caller and called number, if
there is any way to transfer that info as a caller id ( I mean configure
the NT1 to pass called number as calling number to your modem line). If
not you can not.

 I am using Eicon diva server PRI as a 30 port modem pool. There are BRI
versions as well which should work with hylafax as well.

 Sedat

-----Original Message-----
From: Francesco [mailto:hylafax@colliniconsulting.it] 
Sent: Tuesday, October 01, 2002 12:28 AM
To: Sedat Yilmazer; 'Francesco'
Subject: R: [hylafax-users] Callled number fax routing

Thank you for your kind reply, first of all.

Furthermore i would like to ask you if it can works with an analogic US
Robotics 56K FaxModem external attached to the Nt1/Plus analogic line of
an
ISDN line.

By reading the USRobotics manual i saw it supports the CID, caller ID
number.

What do you think? Or, elsewhere, which ISDN modem do you use?

Thank you, bye!





Francesco Collini
________________________________________
Amministratore Unico
collini@colliniconsulting.it
Tel. 348-3621961 Fax 0547-384885

Collini Consulting S.a.S.
Via Cervese 1420
47023 Cesena (FC) - Italy


-----Messaggio originale-----
Da: Sedat Yilmazer [mailto:sedat@kibele.com]
Inviato: lunedi 30 settembre 2002 9.32
A: 'Francesco'
Oggetto: RE: [hylafax-users] Callled number fax routing



Take a llok at the system log to find out how your ISDN card reports
Called number and modify the faxrcvd script accordingly.

 Sedat
-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org] On Behalf Of Francesco
Sent: Monday, September 30, 2002 9:42 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] Callled number fax routing



Hi!

Excuse me if i repeat a question posted sometimes ago by some of you,
but it
is some days that i grep along hylafax-users mailing list in order to
find
out an ISDN solution who can automatically route all incoming faxes on
ISDN
called ID (DID) and i found some difficulties in order to customize the
faxgetty daemon.

Have someone a good and stable solution for me?

Thank you in advance for your interest, bye!





Francesco Collini
________________________________________
Amministratore Unico
collini@colliniconsulting.it
Tel. 348-3621961 Fax 0547-384885

Collini Consulting S.a.S.
Via Cervese 1420
47023 Cesena (FC) - Italy


____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*



____________________ HylaFAX(tm) Users Mailing List
_______________________
  To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
  *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




Project hosted by iFAX Solutions