![]() |
Hi, I had the same problem with our Multitech as well. This problem only occured with a certain type of fax machine on the other end. I think it was a Lanier fax that it was trying to send to. I tried using class 1 rather than class 2, that didn't solve the problem. I even updated the firmware in the modem (The Multitech tech support guys were very helpful), this didn't help either. I eventually replaced the Multitech with a USR modem and the problem disappeared. Hope it helps. Good Luck. -----Original Message----- From: hylafax-users-bounce@hylafax.org [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Sunil William Savkar Sent: Wednesday, September 11, 2002 6:28 AM To: milend@ansco.com Cc: hylafax-users@hylafax.org Subject: Re: [hylafax-users] No response to EOP repeated 3 times > Hi, > > We use Hylafax 4.1-1rh7 on Redhat linux 7.2. The modem is Multitech. > > The attempts to send fax to one of our clients always fail. > The error message in the "xferfaxlog" file is : > "No response to EOP repeated 3 times giving up after 3 attempts to send > fax page" > We have problems sending fax only to this client. Faxes to other clients > are transmited without errors. > > Has anyone else had the same problem? > Is there any solution? > > Milen Hi. I did but I was able ot remedy it by taking my modem out of class 2 operation and into class 1. I use a USR modem. What are you running with? Sunil ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*