[hylafax-users] Unable to establish message carrier...

[V.Dormeyer@t-online.de (Volker Dormeyer)]

Hi,

can somebody help me with that? I can't send a fax to some fax
machines, sometimes. I will get the message "Unable to establish
message carrier".

I use "Sedlbaur Speedfax PCI" ISDN device on Linux Kernel 2.4.17.
Here is the relevant part of the log file:

Sep 05 23:12:33.51: [11111]: SEND file "docq/doc18.ps;01"
Sep 05 23:12:33.51: [11111]: USE page width 1728 pixels in 215 mm
Sep 05 23:12:33.51: [11111]: USE unlimited page length 
Sep 05 23:12:33.51: [11111]: USE 7.7 line/mm
Sep 05 23:12:33.51: [11111]: USE 1-D MR
Sep 05 23:12:33.51: [11111]: SEND training at v.17 14400 bit/s
Sep 05 23:12:33.51: [11111]: <-- [9:AT+FTH=3\r]
Sep 05 23:12:35.24: [11111]: --> [7:CONNECT]
Sep 05 23:12:35.25: [11111]: <-- data [23]
Sep 05 23:12:35.25: [11111]: <-- data [2]
Sep 05 23:12:35.27: [11111]: --> [7:CONNECT]
Sep 05 23:12:35.28: [11111]: <-- data [6]
Sep 05 23:12:35.28: [11111]: <-- data [2]
Sep 05 23:12:36.25: [11111]: --> [2:OK]
Sep 05 23:12:36.25: [11111]: DELAY 700 ms
Sep 05 23:12:36.95: [11111]: MODEM set XON/XOFF/FLUSH: input
interpreted, output disabled
Sep 05 23:12:36.96: [11111]: <-- [11:AT+FTM=145\r]
Sep 05 23:12:38.56: [11111]: --> [7:CONNECT]
Sep 05 23:12:38.57: [11111]: <-- data [1024]
Sep 05 23:12:38.57: [11111]: <-- data [1024]
Sep 05 23:12:38.58: [11111]: <-- data [652]
Sep 05 23:12:38.62: [11111]: <-- data [2]
Sep 05 23:12:40.18: [11111]: --> [2:OK]
Sep 05 23:12:40.18: [11111]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Sep 05 23:12:40.19: [11111]: <-- [9:AT+FRH=3\r]
Sep 05 23:12:40.49: [11111]: --> [7:CONNECT]
Sep 05 23:12:41.56: [11111]: --> [2:OK]
Sep 05 23:12:41.56: [11111]: TRAINING succeeded
Sep 05 23:12:41.56: [11111]: DELAY 75 ms
Sep 05 23:12:41.71: [11111]: <-- [11:AT+FTM=146\r]
Sep 05 23:12:41.71: [11111]: --> [10:NO CARRIER]
Sep 05 23:12:41.72: [11111]: MODEM No carrier
Sep 05 23:12:41.72: [11111]: SEND: Unable to establish message
carrier; Giving up after 3 attempts to send same page
"docq/doc18.ps;01", dirnum 0
Sep 05 23:12:41.72: [11111]: <-- [9:AT+FTH=3\r]
Sep 05 23:12:43.43: [11111]: --> [7:CONNECT]
Sep 05 23:12:43.43: [11111]: <-- data [3]
Sep 05 23:12:43.43: [11111]: <-- data [2]
Sep 05 23:12:43.69: [11111]: --> [2:OK]
Sep 05 23:12:43.69: [11111]: MODEM input buffering enabled
Sep 05 23:12:43.69: [11111]: <-- [5:ATH0\r]
Sep 05 23:12:43.81: [11111]: --> [10:NO CARRIER]
Sep 05 23:12:43.81: [11111]: MODEM No carrier
Sep 05 23:12:43.81: [11111]: MODEM set DTR OFF
Sep 05 23:12:43.82: [11111]: SESSION END

I will be very happy, if someone can help me with that.

Thanks,
Volker

-- 
 Volker Dormeyer # v.dormeyer@t-online.de


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*