 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Error sending Faxes
- To: hylafax-users@hylafax.org
- Subject: [hylafax-users] Error sending Faxes
- From: Stefan Dreyer <Stefan.Dreyer@ddnetservice.net>
- Reply-To: Stefan.Dreyer@ddnetservice.de
- Date: Tue, 06 Aug 2002 14:46:08 +0200
Hi, i try to get hylafax together with mica digital modems on a Cisco AS5200 to work. I have written an RFC2217 client to connect to the modems via a reverse telnet-connection. It works, but if i send a fax to some fax machines, i get error messages. But the received faxes seams looks ok. If i sent a fax from the cisco to another hylafax with analog modem no errors occur. Is there any way to get this solution working? Faxlog: Aug 03 19:15:21.49: [27420]: SESSION BEGIN 00000039 xxxxxxx Aug 03 19:15:21.49: [27420]: HylaFAX (tm) Version 4.1.3 Aug 03 19:15:21.49: [27420]: SEND FAX: JOB 37 DEST xxxxxxx COMMID 00000039 DEV Aug 03 19:15:21.49: [27420]: DELAY 75 ms Aug 03 19:15:21.56: [27420]: DELAY 2600 ms Aug 03 19:15:24.16: [27420]: <-- [4:ATZ\r] Aug 03 19:15:24.21: [27420]: --> [2:OK] Aug 03 19:15:24.21: [27420]: DELAY 3000 ms Aug 03 19:15:27.20: [27420]: <-- [5:ATE0\r] Aug 03 19:15:27.23: [27420]: --> [4:ATE0] Aug 03 19:15:27.23: [27420]: --> [2:OK] Aug 03 19:15:27.23: [27420]: <-- [5:ATV1\r] Aug 03 19:15:27.26: [27420]: --> [2:OK] Aug 03 19:15:27.27: [27420]: <-- [5:ATQ0\r] Aug 03 19:15:27.30: [27420]: --> [2:OK] Aug 03 19:15:27.30: [27420]: <-- [7:ATS0=0\r] Aug 03 19:15:27.33: [27420]: --> [2:OK] Aug 03 19:15:27.33: [27420]: <-- [7:ATS8=2\r] Aug 03 19:15:27.36: [27420]: --> [2:OK] Aug 03 19:15:27.36: [27420]: <-- [8:ATS7=60\r] Aug 03 19:15:27.39: [27420]: --> [2:OK] Aug 03 19:15:27.39: [27420]: <-- [12:AT+FCLASS=2\r] Aug 03 19:15:27.44: [27420]: --> [2:OK] Aug 03 19:15:27.44: [27420]: <-- [10:AT+FTBC=0\r] Aug 03 19:15:27.49: [27420]: --> [2:OK] Aug 03 19:15:27.49: [27420]: <-- [10:AT+FBOR=0\r] Aug 03 19:15:27.54: [27420]: --> [2:OK] Aug 03 19:15:27.54: [27420]: <-- [13:AT+FPHCTO=30\r] Aug 03 19:15:27.58: [27420]: --> [2:OK] Aug 03 19:15:27.58: [27420]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r] Aug 03 19:15:27.63: [27420]: --> [2:OK] Aug 03 19:15:27.63: [27420]: <-- [5:ATM0\r] Aug 03 19:15:27.68: [27420]: --> [2:OK] Aug 03 19:15:27.68: [27420]: <-- [12:AT+FCLASS=2\r] Aug 03 19:15:27.82: [27420]: --> [2:OK] Aug 03 19:15:27.82: [27420]: <-- [10:AT+FTBC=0\r] Aug 03 19:15:27.97: [27420]: --> [2:OK] Aug 03 19:15:27.97: [27420]: <-- [10:AT+FBOR=0\r] Aug 03 19:15:28.11: [27420]: --> [2:OK] Aug 03 19:15:28.11: [27420]: <-- [13:AT+FPHCTO=30\r] Aug 03 19:15:28.25: [27420]: --> [2:OK] Aug 03 19:15:28.25: [27420]: <-- [24:AT+FDCC=1,5,2,2,3,1,0,0\r] Aug 03 19:15:28.40: [27420]: --> [2:OK] Aug 03 19:15:28.40: [27420]: <-- [16:AT+FLID=""\r] Aug 03 19:15:28.54: [27420]: --> [2:OK] Aug 03 19:15:28.54: [27420]: <-- [24:AT+FDIS=1,5,0,2,1,1,0,0\r] Aug 03 19:15:28.68: [27420]: --> [2:OK] Aug 03 19:15:28.68: [27420]: DIAL 0xxxxxxxxx Aug 03 19:15:28.68: [27420]: <-- [14:ATDT0xxxxxxx\r] Aug 03 19:15:40.51: [27420]: --> [5:+FCON] Aug 03 19:15:41.84: [27420]: --> [56:+FNSF:00 00 79 00 00 00 02 0F 01 03 00 10 0 Aug 03 19:15:41.84: [27420]: REMOTE NSF "00 00 79 00 00 00 02 0F 01 03 00 10 05 Aug 03 19:15:41.84: [27420]: NSF remote fax equipment: Panasonic Aug 03 19:15:42.59: [27420]: --> [28:+FCSI:" "] Aug 03 19:15:42.59: [27420]: REMOTE CSI "" Aug 03 19:15:42.86: [27420]: --> [21:+FDIS:1,3,0,2,1,0,0,4] Aug 03 19:15:42.86: [27420]: --> [2:OK] Aug 03 19:15:42.86: [27420]: REMOTE best rate 9600 bit/s Aug 03 19:15:42.86: [27420]: REMOTE max page width 1728 pixels in 215 mm Aug 03 19:15:42.86: [27420]: REMOTE max unlimited page length Aug 03 19:15:42.86: [27420]: REMOTE best vres 7.7 line/mm Aug 03 19:15:42.86: [27420]: REMOTE best format 2-D MR Aug 03 19:15:42.86: [27420]: REMOTE best 20 ms, 10 ms/scanline Aug 03 19:15:42.86: [27420]: USE 9600 bit/s Aug 03 19:15:42.86: [27420]: USE 20 ms, 10 ms/scanline Aug 03 19:15:42.86: [27420]: SEND file "docq/doc38.ps;41" Aug 03 19:15:42.86: [27420]: USE page width 1728 pixels in 215 mm Aug 03 19:15:42.86: [27420]: USE unlimited page length Aug 03 19:15:42.87: [27420]: USE 7.7 line/mm Aug 03 19:15:42.87: [27420]: USE 2-D MR Aug 03 19:15:42.87: [27420]: <-- [24:AT+FDIS=1,3,0,2,1,0,0,4\r] Aug 03 19:15:43.04: [27420]: --> [2:OK] Aug 03 19:15:43.04: [27420]: <-- [7:AT+FDT\r] Aug 03 19:15:49.34: [27420]: --> [21:+FDCS:1,3,0,2,1,0,0,4] Aug 03 19:15:49.82: [27420]: --> [7:CONNECT] Aug 03 19:15:49.82: [27420]: SEND wait for XON Aug 03 19:15:49.82: [27420]: --> [1:^Q] Aug 03 19:15:49.82: [27420]: SEND begin page Aug 03 19:15:49.83: [27420]: <-- data [1025] Aug 03 19:15:49.83: [27420]: <-- data [495] Aug 03 19:15:49.83: [27420]: SENT 1518 bytes of data Aug 03 19:15:49.83: [27420]: <-- data [2] Aug 03 19:15:49.83: [27420]: SEND end page Aug 03 19:15:54.49: [27420]: --> [2:OK] Aug 03 19:15:54.49: [27420]: SEND send EOP (no more pages or documents) Aug 03 19:15:54.49: [27420]: <-- [9:AT+FET=2\r] Aug 03 19:15:57.97: [27420]: --> [7:+FPTS:2] Aug 03 19:15:57.97: [27420]: --> [2:OK] Aug 03 19:15:57.97: [27420]: SEND recv RTN (retrain negative) Aug 03 19:15:57.97: [27420]: <-- [24:AT+FDIS=1,2,0,2,1,0,0,4\r] Aug 03 19:15:58.11: [27420]: --> [2:OK] Aug 03 19:15:58.11: [27420]: <-- [7:AT+FDT\r] Aug 03 19:16:04.41: [27420]: --> [21:+FDCS:1,2,0,2,1,0,0,4] Aug 03 19:16:04.89: [27420]: --> [7:CONNECT] Aug 03 19:16:04.89: [27420]: SEND wait for XON Aug 03 19:16:04.89: [27420]: --> [1:^Q] Aug 03 19:16:04.89: [27420]: SEND begin page Aug 03 19:16:04.90: [27420]: <-- data [1025] Aug 03 19:16:04.90: [27420]: <-- data [495] Aug 03 19:16:04.90: [27420]: SENT 1518 bytes of data Aug 03 19:16:04.90: [27420]: <-- data [2] Aug 03 19:16:04.90: [27420]: SEND end page Aug 03 19:16:09.85: [27420]: --> [2:OK] Aug 03 19:16:09.85: [27420]: SEND send EOP (no more pages or documents) Aug 03 19:16:09.85: [27420]: <-- [9:AT+FET=2\r] Aug 03 19:16:13.31: [27420]: --> [7:+FPTS:2] Aug 03 19:16:13.31: [27420]: --> [2:OK] Aug 03 19:16:13.31: [27420]: SEND recv RTN (retrain negative) Aug 03 19:16:13.31: [27420]: <-- [24:AT+FDIS=1,1,0,2,1,0,0,4\r] Aug 03 19:16:13.45: [27420]: --> [2:OK] Aug 03 19:16:13.45: [27420]: <-- [7:AT+FDT\r] Aug 03 19:16:20.17: [27420]: --> [21:+FDCS:1,1,0,2,1,0,0,4] Aug 03 19:16:21.34: [27420]: --> [7:CONNECT] Aug 03 19:16:21.34: [27420]: SEND wait for XON Aug 03 19:16:21.34: [27420]: --> [1:^Q] Aug 03 19:16:21.34: [27420]: SEND begin page Aug 03 19:16:21.35: [27420]: <-- data [1025] Aug 03 19:16:21.35: [27420]: <-- data [495] Aug 03 19:16:21.35: [27420]: SENT 1518 bytes of data Aug 03 19:16:21.35: [27420]: <-- data [2] Aug 03 19:16:21.35: [27420]: SEND end page Aug 03 19:16:26.90: [27420]: --> [2:OK] Aug 03 19:16:26.90: [27420]: SEND send EOP (no more pages or documents) Aug 03 19:16:26.90: [27420]: <-- [9:AT+FET=2\r] Aug 03 19:16:30.35: [27420]: --> [7:+FPTS:2] Aug 03 19:16:30.35: [27420]: --> [2:OK] Aug 03 19:16:30.35: [27420]: SEND recv RTN (retrain negative) Aug 03 19:16:30.35: [27420]: <-- [6:AT+FK\r] Aug 03 19:16:32.02: [27420]: --> [7:+FHNG:2] Aug 03 19:16:32.02: [27420]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (co Aug 03 19:16:32.60: [27420]: --> [2:OK] Aug 03 19:16:32.60: [27420]: <-- [5:ATH0\r] Aug 03 19:16:32.75: [27420]: --> [4:ATH0] Aug 03 19:16:32.75: [27420]: --> [2:OK] Aug 03 19:16:32.75: [27420]: SESSION END Thanks in advance Stefan ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Follow-Ups:
- Re: [hylafax-users] Error sending Faxes
- From: Lee Howard
- Re: [hylafax-users] Error sending Faxes
- Prev by Date: [hylafax-users] Using Hylafax with SAP
- Next by Date: [hylafax-users] First install + first problems :)
- Previous by thread: [hylafax-users] Using Hylafax with SAP
- Next by thread: Re: [hylafax-users] Error sending Faxes
- Index(es):
Project hosted by iFAX Solutions