 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
- To: Bestia <bestia@lanstation.it>
- Subject: Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
- From: Martin Zambo <info@it-zambo.de>
- Cc: <hylafax-users@hylafax.org>
- Date: Sat, 27 Jul 2002 15:11:16 GMT
Hi,
I had the same problem and all I did was configuring the modem in �Class
2�. After that the problem was solved.
Regards,
Martin
>>>>>>>>>>>>>>>>>> Urspr�ngliche Nachricht <<<<<<<<<<<<<<<<<<
Am 27.07.2002, 16:12:59, schrieb "Bestia" <bestia@lanstation.it> zum Thema
[hylafax-users] Send 1 Fax, Then Can Never Receive:
> At last, after weeks of trying hard to solve this one by myself, I
decided
> to post on the list, crying for help!
> My HylaFAX installation works almost fine...I can actually send and
> receive faxes. I can also send faxes from other PCs in the LAN (both from
> Linux boxes running GFax and from Windwos boxes running whfc)...This
> probably means that I don't have huge hardware or software configuration
> issues.
> The thing is...that after I send a fax, HylaFAX never returns to the
state
> of "Running and idle", instead faxstat keep saying "Waiting for modem to
> come ready"...DTR is set OFF by FaxSend, and nothing happens after fax is
> succesfully sent. Obviously in this situation, the modem cannot receive
> faxes. So, I always have to kill faxgetty manually, faxgetty respawns and
> take control of the serial line re-initializing the modem...
> I believe this is due to the fact that - for some strange reason -
> faxgetty does not realize that the faxsend job is over and that he has to
> set the modem DTR on, because faxsend just leaves DTR set to off.
> I usually send 5 faxes and receive 6-8 faxes a day...So I cannot simply
> stay in the office all day making sure that the system.
> Please help!!!!
> Now, the facts:
> 1) OS: RedHat Linux 7.3 running on i386
> 2) Hylafax Version: HylaFAX RPM version 4.1.2-rh7
> 3) Modem (external): MODEM USR U.S. Robotics 56K Message Rev. 12.1.12
> The faxgetty entry in my /etc/inittab is the following:
> S1:235:respawn:/usr/sbin/faxgetty ttyS1
> My /var/spool/hylafax/etc/config.ttyS1 is taken from the template Id:
> usr-xon,v 1.6 2002/04/07 20:29:27 darren. I have basically added just the
> last line:
> CountryCode: XX
> AreaCode: XXX
> FAXNumber: +XX.XXX.XXXXXX
> LongDistancePrefix: 0
> InternationalPrefix: 00
> DialStringRules: etc/dialrules
> ServerTracing: 0x0f
> SessionTracing: 0xFFF
> RecvFileMode: 0666
> LogFileMode: 0600
> DeviceMode: 0600
> RingsBeforeAnswer: 2
> SpeakerVolume: low
> GettyArgs: "-h %l dx_%s"
> LocalIdentifier: "MyCompanyName"
> TagLineFont: etc/lutRS18.pcf
> TagLineFormat: "From %%l|%c|Page %%P of %%T"
> MaxRecvPages: 25
> UUCPLockDir: /var/lock
> ModemType: Class1 # use class 1 interface
> ModemRate: 19200 # rate for DCE-DTE communication
> ModemFlowControl: xonxoff # hardware flow control
> ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or
not)
> ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow
control
> ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow
control
> ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow
control
> ModemResultCodesCmd: ATQ0X4 # enable result codes
> ModemMfrQueryCmd: !USR
> ModemModelQueryCmd: ATI3
> ModemRevQueryCmd: ATI7 # XXX returns a multi-line result
> Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow
control
> Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware
flow control
> Class1SFLOCmd: "" # modem does this
automatically
> ModemSetupAACmd: AT+FCLASS=0 # leave modem idling in class 0
> ModemAnswerCmd: AT+FCLASS=1A # answer in Class 1
> Class2NRCmd: AT+FNR=1,1,1,0
> ModemDialCmd: ATX3DT%s # T for tone dialing, @ for
silence
> In the following log you can analize a session where I send a fax out and
> the I have to kill the faxgetty process because the modem does not go
back
> to DTR ON.
> lug 27 15:58:54 fax FaxQueuer[11811]: SUBMIT JOB 158
> lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR OFF
> lug 27 15:59:05 fax FaxSend[11950]: DELAY 75 ms
> lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR ON
> lug 27 15:59:05 fax FaxSend[11950]: DELAY 2600 ms
> lug 27 15:59:08 fax FaxSend[11950]: MODEM set baud rate: 19200 baud,
input
> flow XON/XOFF, output flow XON/XOFFlug 27 15:59:08 fax FaxSend[11950]:
MODEM flush i/o
> lug 27 15:59:08 fax FaxSend[11950]: <-- [4:ATZ\r]
> lug 27 15:59:08 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:08 fax FaxSend[11950]: DELAY 3000 ms
> lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATE0\r]
> lug 27 15:59:11 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATV1\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATQ0X4\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS0=0\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS8=2\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [8:ATS7=60\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT&H2&I2&R1\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [11:ATS13=1&D2\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [6:AT&C1\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT+FCLASS=?\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [7:0,1,2.0]
> lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI3\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [38:U.S. Robotics 56K Message Rev.
> 12.1.12]lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI7\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [24:Configuration Profile...]
> lug 27 15:59:14 fax FaxSend[11950]: --> [37:Product type Italy
> External]lug 27 15:59:14 fax FaxSend[11950]: --> [31:Product ID:
13206800]
> lug 27 15:59:14 fax FaxSend[11950]: --> [43:Options
> V32bis,V.34+,x2,V.90]lug 27 15:59:14 fax FaxSend[11950]: --> [40:Fax
Options Class
> 1/Class 2.0]lug 27 15:59:14 fax FaxSend[11950]: --> [41:Voice Options
Speaker
> Phone, TAD]lug 27 15:59:14 fax FaxSend[11950]: --> [30:Clock Freq
92.0Mhz]
> lug 27 15:59:14 fax FaxSend[11950]: --> [27:EPROM 256k]
> lug 27 15:59:14 fax FaxSend[11950]: --> [26:RAM 32k]
> lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH date 2/13/98]
> lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH rev 12.1.12]
> lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP date 2/13/98]
> lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP rev 12.1.12]
> lug 27 15:59:15 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FTM=?\r]
> lug 27 15:59:15 fax FaxSend[11950]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax
FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FRM=?\r]
> lug 27 15:59:15 fax FaxSend[11950]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax
FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: <-- [12:AT+FCLASS=0\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: MODEM USR U.S. Robotics 56K Message
> Rev. 12.1.12/Configuration Profile... Product type Italy
> External Product ID: 13206800 Options
> V32bis,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Voice
> Options Speaker Phone, TAD Clock Freq 92.0Mhz EPROM
> 256k RAM 32k FLASH date
> 2/13/98 FLASH rev 12.1.12 DSP date 2/13/98 DSP
> rev 12.1.12lug 27 15:59:16 fax FaxSend[11950]: <--
[7:ATL1M1\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: MODEM input buffering disabled
> lug 27 15:59:16 fax FaxSend[11950]: SEND FAX: JOB 158 DEST
> 1088003534680300 COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:59 fax
FaxSend[11950]: SEND FAX: JOB 158 SENT in 0:11
> Jul 27 16:00:54 fax FaxGetty[11827]: CAUGHT SIGNAL 15
> Jul 27 16:00:54 fax FaxGetty[11827]: CLOSE /dev/ttyS1
> Jul 27 16:00:54 fax FaxGetty[11827]: <-- [5:ATH0\r]
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM TIMEOUT: reading line from
modem
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM <Timeout>
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM set DTR OFF
> Jul 27 16:00:59 fax FaxGetty[11986]: OPEN /dev/ttyS1 HylaFAX (tm)
Version
> 4.1.2Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR OFF
> Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 75 ms
> Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR ON
> Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 2600 ms
> Jul 27 16:01:02 fax FaxGetty[11986]: MODEM set baud rate: 19200 baud,
> input flow XON/XOFF, output flow XON/XOFFJul 27 16:01:02 fax
FaxGetty[11986]: MODEM flush i/o
> Jul 27 16:01:02 fax FaxGetty[11986]: <-- [4:ATZ\r]
> Jul 27 16:01:02 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:02 fax FaxGetty[11986]: DELAY 3000 ms
> Jul 27 16:01:05 fax FaxGetty[11986]: <-- [5:ATE0\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [5:ATV1\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATQ0X4\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS0=0\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS8=2\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [8:ATS7=60\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT&H2&I2&R1\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [11:ATS13=1&D2\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [6:AT&C1\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT+FCLASS=?\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [7:0,1,2.0]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI3\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [38:U.S. Robotics 56K Message
> Rev. 12.1.12]Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI7\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [24:Configuration Profile...]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [37:Product type Italy
> External]Jul 27 16:01:08 fax FaxGetty[11986]: --> [31:Product ID:
13206800]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [43:Options
> V32bis,V.34+,x2,V.90]Jul 27 16:01:08 fax FaxGetty[11986]: --> [40:Fax
Options Class
> 1/Class 2.0]Jul 27 16:01:08 fax FaxGetty[11986]: --> [41:Voice Options
> Speaker Phone, TAD]Jul 27 16:01:08 fax FaxGetty[11986]: --> [30:Clock Freq
92.0Mhz]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [27:EPROM 256k]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [26:RAM 32k]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH date
2/13/98]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH rev
12.1.12]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP date
2/13/98]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP rev
12.1.12]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FTM=?\r]
> Jul 27 16:01:09 fax FaxGetty[11986]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:09 fax
FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FRM=?\r]
> Jul 27 16:01:09 fax FaxGetty[11986]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:10 fax
FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=0\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: MODEM USR U.S. Robotics 56K Message
> Rev. 12.1.12/Configuration Profile... Product type Italy
> External Product ID: 13206800 Options
> V32bis,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Voice
> Options Speaker Phone, TAD Clock Freq 92.0Mhz EPROM
> 256k RAM 32k FLASH date
> 2/13/98 FLASH rev 12.1.12 DSP date 2/13/98 DSP
> rev 12.1.12Jul 27 16:01:10 fax FaxGetty[11986]: <--
[7:ATL1M1\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: MODEM input buffering disabled
> Also, you may want to check the relevant transmition log:
> lug 27 15:59:16.64: [11950]: SESSION BEGIN 00000438 395741088003534680300
> lug 27 15:59:16.64: [11950]: HylaFAX (tm) Version 4.1.2
> lug 27 15:59:16.64: [11950]: SEND FAX: JOB 158 DEST 1088003534680300
> COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:16.64: [11950]: MODEM set
DTR OFF
> lug 27 15:59:16.64: [11950]: DELAY 75 ms
> lug 27 15:59:16.72: [11950]: MODEM set DTR ON
> lug 27 15:59:16.72: [11950]: DELAY 2600 ms
> lug 27 15:59:19.32: [11950]: MODEM set baud rate: 19200 baud, input flow
> XON/XOFF, output flow XON/XOFFlug 27 15:59:19.32: [11950]: MODEM flush
i/o
> lug 27 15:59:19.32: [11950]: <-- [4:ATZ\r]
> lug 27 15:59:19.46: [11950]: --> [2:OK]
> lug 27 15:59:19.46: [11950]: DELAY 3000 ms
> lug 27 15:59:22.46: [11950]: <-- [5:ATE0\r]
> lug 27 15:59:22.60: [11950]: --> [2:OK]
> lug 27 15:59:22.60: [11950]: <-- [5:ATV1\r]
> lug 27 15:59:22.74: [11950]: --> [2:OK]
> lug 27 15:59:22.74: [11950]: <-- [7:ATQ0X4\r]
> lug 27 15:59:22.88: [11950]: --> [2:OK]
> lug 27 15:59:22.88: [11950]: <-- [7:ATS0=0\r]
> lug 27 15:59:23.02: [11950]: --> [2:OK]
> lug 27 15:59:23.02: [11950]: <-- [7:ATS8=2\r]
> lug 27 15:59:23.16: [11950]: --> [2:OK]
> lug 27 15:59:23.16: [11950]: <-- [8:ATS7=60\r]
> lug 27 15:59:23.30: [11950]: --> [2:OK]
> lug 27 15:59:23.30: [11950]: <-- [12:AT&H2&I2&R1\r]
> lug 27 15:59:23.44: [11950]: --> [2:OK]
> lug 27 15:59:23.44: [11950]: <-- [11:ATS13=1&D2\r]
> lug 27 15:59:23.58: [11950]: --> [2:OK]
> lug 27 15:59:23.58: [11950]: <-- [6:AT&C1\r]
> lug 27 15:59:23.72: [11950]: --> [2:OK]
> lug 27 15:59:23.72: [11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:23.86: [11950]: <-- [12:AT+FCLASS=0\r]
> lug 27 15:59:24.00: [11950]: --> [2:OK]
> lug 27 15:59:24.00: [11950]: <-- [7:ATL1M1\r]
> lug 27 15:59:24.14: [11950]: --> [2:OK]
> lug 27 15:59:24.14: [11950]: STATE CHANGE: RUNNING -> SENDING
> lug 27 15:59:24.14: [11950]: MODEM input buffering enabled
> lug 27 15:59:24.14: [11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:24.39: [11950]: --> [2:OK]
> lug 27 15:59:24.39: [11950]: MODEM set XON/XOFF/FLUSH: input ignored,
> output disabledlug 27 15:59:24.40: [11950]: DIAL 1088003534680300
> lug 27 15:59:24.40: [11950]: <-- [23:ATX3DT1088003534680300\r]
> lug 27 15:59:45.79: [11950]: --> [7:CONNECT]
> lug 27 15:59:45.79: [11950]: MODEM input buffering disabled
> lug 27 15:59:47.63: [11950]: --> HDLC<41:FF C0 04 00 00 88 01 00 51 92 08
> EA A2 32 32 B2 82 72 04 92 72 2A A2 4A 72 82 2A 00 F2 00 01 01 1B 71 80
80
> 80 80 20 0B 90>lug 27 15:59:47.63: [11950]: --> [2:OK]
> lug 27 15:59:47.63: [11950]: REMOTE NSF "00 00 11 80 00 8A 49 10 57 45 4C
> 4C 4D 41 4E 20 49 4E 54 45 52 4E 41 54 00 4F 00 80 80 D8 8E 01 01 01 01
04
> D0"lug 27 15:59:47.63: [11950]: NSF remote fax equipment: XXX
> lug 27 15:59:47.63: [11950]: NSF remote station ID: "XXX"
> lug 27 15:59:47.63: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:47.65: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.32: [11950]: --> HDLC<25:FF C0 02 0C 0C CC 0C 1C 6C 2C 0C
> 04 04 04 04 04 04 04 04 04 04 04 04 3C A2>lug 27 15:59:48.32: [11950]: -->
[2:OK]
> lug 27 15:59:48.32: [11950]: REMOTE CSI "04680300"
> lug 27 15:59:48.32: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:48.34: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.59: [11950]: --> HDLC<9:FF C8 01 00 77 15 22 17 5D>
> lug 27 15:59:48.59: [11950]: --> [2:OK]
> lug 27 15:59:48.59: [11950]: REMOTE best rate 14400 bit/s
> lug 27 15:59:48.59: [11950]: REMOTE max page width 1728 pixels in 215 mm
> lug 27 15:59:48.59: [11950]: REMOTE max unlimited page length
> lug 27 15:59:48.59: [11950]: REMOTE best vres 7.7 line/mm
> lug 27 15:59:48.59: [11950]: REMOTE best format 2-D MMR
> lug 27 15:59:48.59: [11950]: REMOTE supports T.30 Annex A, ECM
> lug 27 15:59:48.59: [11950]: REMOTE best 10 ms/scanline
> lug 27 15:59:48.59: [11950]: USE 14400 bit/s
> lug 27 15:59:48.60: [11950]: USE 10 ms/scanline
> lug 27 15:59:48.60: [11950]: SEND file "docq/doc163.ps;70"
> lug 27 15:59:48.60: [11950]: USE page width 1728 pixels in 215 mm
> lug 27 15:59:48.60: [11950]: USE unlimited page length
> lug 27 15:59:48.60: [11950]: USE 3.85 line/mm
> lug 27 15:59:48.60: [11950]: USE 2-D MR
> lug 27 15:59:48.60: [11950]: SEND training at v.17 14400 bit/s
> lug 27 15:59:48.60: [11950]: <-- [9:AT+FTH=3\r]
> lug 27 15:59:48.80: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.80: [11950]: <-- HDLC<23:FF C0 C2 CE 86 CA 04 36 2E 76 92
> B4 9E A6 76 86 16 C2 04 04 04 04 04>lug 27 15:59:48.80: [11950]: <-- data
[23]
> lug 27 15:59:48.80: [11950]: <-- data [2]
> lug 27 15:59:48.83: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.83: [11950]: <-- HDLC<6:FF C8 C1 00 45 14>
> lug 27 15:59:48.83: [11950]: <-- data [6]
> lug 27 15:59:48.83: [11950]: <-- data [2]
> lug 27 15:59:50.78: [11950]: --> [2:OK]
> lug 27 15:59:50.78: [11950]: <-- [9:AT+FTS=7\r]
> lug 27 15:59:50.87: [11950]: --> [2:OK]
> lug 27 15:59:50.87: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
> output disabledlug 27 15:59:50.87: [11950]: <-- [11:AT+FTM=145\r]
> lug 27 15:59:52.35: [11950]: --> [7:CONNECT]
> lug 27 15:59:52.35: [11950]: <-- data [1024]
> lug 27 15:59:52.35: [11950]: <-- data [1024]
> lug 27 15:59:52.35: [11950]: <-- data [652]
> lug 27 15:59:52.35: [11950]: <-- data [2]
> lug 27 15:59:53.88: [11950]: --> [2:OK]
> lug 27 15:59:53.88: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
> output disabledlug 27 15:59:53.88: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:54.14: [11950]: --> [7:CONNECT]
> lug 27 15:59:55.23: [11950]: --> HDLC<5:FF C8 21 57 BE>
> lug 27 15:59:55.23: [11950]: --> [2:OK]
> lug 27 15:59:55.23: [11950]: TRAINING succeeded
> lug 27 15:59:55.23: [11950]: DELAY 75 ms
> lug 27 15:59:55.31: [11950]: <-- [11:AT+FTM=146\r]
> lug 27 15:59:55.57: [11950]: --> [7:CONNECT]
> lug 27 15:59:55.57: [11950]: SEND begin page
> lug 27 15:59:55.57: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
> output disabledlug 27 15:59:55.58: [11950]: <-- data [1025]
> lug 27 15:59:55.58: [11950]: <-- data [1029]
> lug 27 15:59:55.58: [11950]: <-- data [570]
> lug 27 15:59:55.58: [11950]: SENT 2615 bytes of data
> lug 27 15:59:55.58: [11950]: SEND 2D RTC
> lug 27 15:59:55.58: [11950]: <-- data [30]
> lug 27 15:59:55.58: [11950]: <-- data [2]
> lug 27 15:59:55.58: [11950]: SEND end page
> lug 27 15:59:57.07: [11950]: --> [2:OK]
> lug 27 15:59:57.07: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
> output disabledlug 27 15:59:57.07: [11950]: <-- [9:AT+FTS=9\r]
> lug 27 15:59:57.18: [11950]: --> [2:OK]
> lug 27 15:59:57.18: [11950]: SEND send EOP (no more pages or documents)
> lug 27 15:59:57.18: [11950]: <-- [9:AT+FTH=3\r]
> lug 27 15:59:57.34: [11950]: --> [7:CONNECT]
> lug 27 15:59:57.34: [11950]: <-- HDLC<3:FF C8 F4>
> lug 27 15:59:57.34: [11950]: <-- data [3]
> lug 27 15:59:57.34: [11950]: <-- data [2]
> lug 27 15:59:58.52: [11950]: --> [2:OK]
> lug 27 15:59:58.52: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:58.94: [11950]: --> [7:CONNECT]
> lug 27 15:59:59.82: [11950]: --> HDLC<5:FF C8 31 45 8F>
> lug 27 15:59:59.82: [11950]: --> [2:OK]
> lug 27 15:59:59.82: [11950]: SEND recv MCF (message confirmation)
> lug 27 15:59:59.83: [11950]: SEND FAX (00000438): FROM lore@fax TO
> 1088xxxxxxxxx (page 1 of 1 sent in 0:11)lug 27 15:59:59.83: [11950]: SEND
FAX (00000438): FROM lore@fax TO
> 1088xxxxxxxxx (docq/doc163.ps;70 sent in 0:11)lug 27 15:59:59.83:
[11950]: <-- [9:AT+FTH=3\r]
> lug 27 16:00:00.03: [11950]: --> [7:CONNECT]
> lug 27 16:00:00.03: [11950]: <-- HDLC<3:FF C8 DF>
> lug 27 16:00:00.03: [11950]: <-- data [3]
> lug 27 16:00:00.03: [11950]: <-- data [2]
> lug 27 16:00:01.20: [11950]: --> [2:OK]
> lug 27 16:00:01.20: [11950]: MODEM input buffering enabled
> lug 27 16:00:01.20: [11950]: <-- [5:ATH0\r]
> lug 27 16:00:01.44: [11950]: --> [2:OK]
> lug 27 16:00:01.44: [11950]: MODEM set DTR OFF
> lug 27 16:00:01.44: [11950]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
> lug 27 16:00:01.44: [11950]: SESSION END
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
> To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- References:
- [hylafax-users] Send 1 Fax, Then Can Never Receive
- From: Bestia
- [hylafax-users] Send 1 Fax, Then Can Never Receive
- From: Bestia
- [hylafax-users] Send 1 Fax, Then Can Never Receive
- Prev by Date: Re: [hylafax-users] How to create a slackware tgz
- Next by Date: [hylafax-users] faxmail -f argument not working
- Previous by thread: Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
- Next by thread: Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
- Index(es):
Project hosted by iFAX Solutions