[hylafax-users] Receive Fax Problem (linux)

["Kung1388" <kung1388@hotmail.com>]

kung wrote:

 

Most of the receive fax is ok, except following:

 

please help!

 

Jul 17 18:19:38.78: [19354]: SESSION BEGIN 00000885 85224812110
Jul 17 18:19:38.78: [19354]: <-- [4:ATA\r]
Jul 17 18:19:45.03: [19354]: --> [7:CONNECT]
Jul 17 18:19:45.03: [19354]: ANSWER: FAX CONNECTION
Jul 17 18:19:45.03: [19354]: RECV FAX: begin
Jul 17 18:19:45.03: [19354]: <-- data [23]
Jul 17 18:19:45.03: [19354]: <-- data [2]
Jul 17 18:19:45.06: [19354]: --> [7:CONNECT]
Jul 17 18:19:45.06: [19354]: <-- data [10]
Jul 17 18:19:45.06: [19354]: <-- data [2]
Jul 17 18:19:47.15: [19354]: --> [2:OK]
Jul 17 18:19:47.15: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:19:48.05: [19354]: --> [7:CONNECT]
Jul 17 18:19:49.95: [19354]: --> [2:OK]
Jul 17 18:19:49.95: [19354]: REMOTE TSI "+49 69 24268102"
Jul 17 18:19:49.95: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:19:49.97: [19354]: --> [7:CONNECT]
Jul 17 18:19:49.98: [19354]: --> [2:OK]
Jul 17 18:19:49.98: [19354]: REMOTE wants 14400 bit/s
Jul 17 18:19:49.98: [19354]: REMOTE wants page width 1728 pixels in 215 mm
Jul 17 18:19:49.98: [19354]: REMOTE wants unlimited page length
Jul 17 18:19:49.98: [19354]: REMOTE wants 3.85 line/mm
Jul 17 18:19:49.98: [19354]: REMOTE wants 2-D MR
Jul 17 18:19:49.98: [19354]: RECV training at v.17 14400 bit/s
Jul 17 18:19:49.98: [19354]: <-- [11:AT+FRM=145\r]
Jul 17 18:19:54.48: [19354]: --> [0:]
Jul 17 18:19:54.48: [19354]: MODEM <Empty line>
Jul 17 18:19:54.48: [19354]: <-- data [1]
Jul 17 18:19:54.68: [19354]: MODEM <Timeout>
Jul 17 18:19:54.68: [19354]: DELAY 75 ms
Jul 17 18:19:54.76: [19354]: <-- [9:AT+FTH=3\r]
Jul 17 18:19:55.13: [19354]: --> [7:CONNECT]
Jul 17 18:19:55.13: [19354]: <-- data [3]
Jul 17 18:19:55.13: [19354]: <-- data [2]
Jul 17 18:19:56.91: [19354]: --> [2:]
Jul 17 18:19:56.91: [19354]: --> [10:NO CARRIER]
Jul 17 18:19:56.91: [19354]: MODEM No carrier
Jul 17 18:19:56.91: [19354]: TRAINING failed
Jul 17 18:19:56.91: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:19:57.88: [19354]: --> [7:CONNECT]
Jul 17 18:19:58.22: [19354]: --> [2:OK]
Jul 17 18:19:58.22: [19354]: REMOTE wants 14400 bit/s
Jul 17 18:19:58.22: [19354]: REMOTE wants page width 1728 pixels in 215 mm
Jul 17 18:19:58.22: [19354]: REMOTE wants unlimited page length
Jul 17 18:19:58.22: [19354]: REMOTE wants 3.85 line/mm
Jul 17 18:19:58.22: [19354]: REMOTE wants 2-D MR
Jul 17 18:19:58.22: [19354]: RECV training at v.17 14400 bit/s
Jul 17 18:19:58.22: [19354]: <-- [11:AT+FRM=145\r]
Jul 17 18:20:02.72: [19354]: --> [0:]
Jul 17 18:20:02.72: [19354]: MODEM <Empty line>
Jul 17 18:20:02.72: [19354]: <-- data [1]
Jul 17 18:20:02.92: [19354]: MODEM <Timeout>
Jul 17 18:20:02.92: [19354]: DELAY 75 ms
Jul 17 18:20:03.00: [19354]: <-- [9:AT+FTH=3\r]
Jul 17 18:20:03.33: [19354]: --> [7:CONNECT]
Jul 17 18:20:03.33: [19354]: <-- data [3]
Jul 17 18:20:03.33: [19354]: <-- data [2]
Jul 17 18:20:05.11: [19354]: --> [2:]
Jul 17 18:20:05.11: [19354]: --> [10:NO CARRIER]
Jul 17 18:20:05.11: [19354]: MODEM No carrier
Jul 17 18:20:05.11: [19354]: TRAINING failed
Jul 17 18:20:05.11: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:20:06.05: [19354]: --> [7:CONNECT]
Jul 17 18:20:11.05: [19354]: <-- data [1]
Jul 17 18:20:11.25: [19354]: MODEM <Timeout>
Jul 17 18:20:11.25: [19354]: DELAY 1500 ms
Jul 17 18:20:12.75: [19354]: <-- [9:AT+FTH=3\r]
Jul 17 18:20:12.80: [19354]: --> [7:CONNECT]
Jul 17 18:20:12.80: [19354]: <-- data [23]
Jul 17 18:20:12.80: [19354]: <-- data [2]
Jul 17 18:20:12.83: [19354]: --> [7:CONNECT]
Jul 17 18:20:12.83: [19354]: <-- data [10]
Jul 17 18:20:12.83: [19354]: <-- data [2]
Jul 17 18:20:15.02: [19354]: --> [2:OK]
Jul 17 18:20:15.02: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:20:18.12: [19354]: --> [0:]
Jul 17 18:20:18.12: [19354]: MODEM <Empty line>
Jul 17 18:20:18.12: [19354]: <-- data [1]
Jul 17 18:20:18.32: [19354]: MODEM <Timeout>
Jul 17 18:20:18.32: [19354]: DELAY 1500 ms
Jul 17 18:20:19.82: [19354]: <-- [9:AT+FTH=3\r]
Jul 17 18:20:19.87: [19354]: --> [7:CONNECT]
Jul 17 18:20:19.87: [19354]: <-- data [23]
Jul 17 18:20:19.87: [19354]: <-- data [2]
Jul 17 18:20:19.90: [19354]: --> [7:CONNECT]
Jul 17 18:20:19.90: [19354]: <-- data [10]
Jul 17 18:20:19.90: [19354]: <-- data [2]
Jul 17 18:20:22.09: [19354]: --> [2:OK]
Jul 17 18:20:22.09: [19354]: <-- [9:AT+FRH=3\r]
Jul 17 18:20:25.19: [19354]: --> [0:]
Jul 17 18:20:25.19: [19354]: MODEM <Empty line>
Jul 17 18:20:25.19: [19354]: <-- data [1]
Jul 17 18:20:25.39: [19354]: MODEM <Timeout>
Jul 17 18:20:25.39: [19354]: RECV FAX: Failure to train modems
Jul 17 18:20:25.39: [19354]: RECV FAX: end
Jul 17 18:20:25.39: [19354]: SESSION END