[hylafax-users] Receive-Fax-Problem

["René Glauser" <rgl@swisslux.ch>]

hello
with a specific client i've always got problems, while he sends me a fax
with more than one pages. normaly the receivement of multiple-pages faxes
is not a problem.

can somebody help me with the following log to solve the problem????

greetings
rené



    Unknown hangup code

    ---- Transcript of session follows ----

Jun 18 11:10:55.63: [ 2059]: SESSION BEGIN 00000251 41438448081
Jun 18 11:10:55.63: [ 2059]: <-- [4:ATA\r]
Jun 18 11:11:07.26: [ 2059]: --> [5:+FCON]
Jun 18 11:11:07.26: [ 2059]: MODEM set baud rate: 19200 baud (flow control
unchanged)
Jun 18 11:11:07.26: [ 2059]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFF
Jun 18 11:11:07.26: [ 2059]: ANSWER: FAX CONNECTION
Jun 18 11:11:07.26: [ 2059]: MODEM input buffering enabled
Jun 18 11:11:07.26: [ 2059]: RECV FAX: begin
Jun 18 11:11:07.26: [ 2059]: RECV FAX: CDPN
Jun 18 11:11:09.13: [ 2059]: --> [29:+FTSI: "       +41 1 4371698"]
Jun 18 11:11:09.13: [ 2059]: REMOTE TSI "+41 1 4371698"
Jun 18 11:11:09.13: [ 2059]: --> [22:+FDCS: 0,5,0,2,0,0,0,1]
Jun 18 11:11:09.13: [ 2059]: REMOTE wants 14400 bit/s
Jun 18 11:11:09.13: [ 2059]: REMOTE wants page width 1728 pixels in 215 mm
Jun 18 11:11:09.13: [ 2059]: REMOTE wants unlimited page length
Jun 18 11:11:09.13: [ 2059]: REMOTE wants 3.85 line/mm
Jun 18 11:11:09.13: [ 2059]: REMOTE wants 1-D MR
Jun 18 11:11:12.50: [ 2059]: --> [2:OK]
Jun 18 11:11:12.50: [ 2059]: <-- [7:AT+FDR\r]
Jun 18 11:11:14.15: [ 2059]: --> [5:+FCFR]
Jun 18 11:11:14.15: [ 2059]: --> [22:+FDCS: 0,5,0,2,0,0,0,1]
Jun 18 11:11:14.15: [ 2059]: REMOTE wants 14400 bit/s
Jun 18 11:11:14.15: [ 2059]: REMOTE wants page width 1728 pixels in 215 mm
Jun 18 11:11:14.15: [ 2059]: REMOTE wants unlimited page length
Jun 18 11:11:14.15: [ 2059]: REMOTE wants 3.85 line/mm
Jun 18 11:11:14.15: [ 2059]: REMOTE wants 1-D MR
Jun 18 11:11:14.85: [ 2059]: --> [7:CONNECT]
Jun 18 11:11:14.85: [ 2059]: RECV: begin page
Jun 18 11:11:14.85: [ 2059]: MODEM set XON/XOFF/FLUSH: input ignored,
output generated
Jun 18 11:11:14.85: [ 2059]: RECV: send trigger 022
Jun 18 11:11:29.64: [ 2059]: RECV: 1122 total lines, 0 bad lines, 0
consecutive bad lines
Jun 18 11:11:29.64: [ 2059]: MODEM set XON/XOFF/DRAIN: input interpreted,
output disabled
Jun 18 11:11:29.64: [ 2059]: --> [8:+FPTS: 1]
Jun 18 11:11:30.79: [ 2059]: --> [7:+FET: 0]
Jun 18 11:11:30.79: [ 2059]: RECV recv MPS (more pages, same document)
Jun 18 11:11:30.79: [ 2059]: --> [2:OK]
Jun 18 11:11:30.79: [ 2059]: RECV send MCF (message confirmation)
Jun 18 11:11:30.79: [ 2059]: RECV FAX (00000251): from +41 1 4371698, page
1 in 0:18, INF, 3.85 line/mm, 1-D MR, 14400 bit/s
Jun 18 11:11:30.79: [ 2059]: <-- [7:AT+FDR\r]
Jun 18 11:12:08.01: [ 2059]: --> [10:+FHNG: 112]
Jun 18 11:12:08.01: [ 2059]: REMOTE HANGUP: Unknown hangup code (code 112)
Jun 18 11:12:08.01: [ 2059]: RECV FAX (00000251): recvq/fax00233.tif from
+41 1 4371698, route to <unspecified>, 1 pages in 1:01
Jun 18 11:12:08.01: [ 2059]: RECV FAX: Unknown hangup code
Jun 18 11:12:08.01: [ 2059]: RECV FAX (00000251): session with +41 1
4371698 terminated abnormally: Unknown hangup code
Jun 18 11:12:08.01: [ 2059]: RECV FAX: bin/faxrcvd "recvq/fax00233.tif"
"modem" "00000251" "Unknown hangup code" ""



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null