[hylafax-users] Initialyze modem fail after a good send fax or after no dial tone !!!!!

[Gwénaël ROUILLEC <gwenael@gwenael.homeip.net>]

Sorry, but the log was not good, so i send you again all the message.

 

Thanks for all

 

Hi,

 

I have a problem whith my modem (usr 56k message modem AT10=5601).

After to send a fax, or after no local dial tone (i plug off the phone link), the faxstat give me this message :

 

 > Waiting for modem to come ready

 

After few time, i receive this mail :

 

> The HylaFAX software thinks that there is a problem with the modem
> on device /dev/ttyS0 that needs attention; repeated attempts to
> initialize the modem have failed.
> Consult the server trace logs for more information on what is happening

 

The log for the no local dialtone is this one :

 

 

jun 21 22:39:23.16: [ 2029]: SESSION BEGIN 00000021 3301445454
jun 21 22:39:23.16: [ 2029]: HylaFAX (tm) Version 4.1.2
jun 21 22:39:23.16: [ 2029]: SEND FAX: JOB 14 DEST 445454 COMMID 00000021 DEVICE '/dev/ttyS0'
jun 21 22:39:23.16: [ 2029]: DELAY 75 ms
jun 21 22:39:23.23: [ 2029]: DELAY 2600 ms
jun 21 22:39:25.86: [ 2029]: <-- [4:ATZ\r]
jun 21 22:39:25.99: [ 2029]: --> [2:OK]
jun 21 22:39:26.00: [ 2029]: DELAY 3000 ms
jun 21 22:39:28.99: [ 2029]: <-- [5:ATE0\r]
jun 21 22:39:29.12: [ 2029]: --> [2:OK]
jun 21 22:39:29.13: [ 2029]: <-- [5:ATV1\r]
jun 21 22:39:29.25: [ 2029]: --> [2:OK]
jun 21 22:39:29.26: [ 2029]: <-- [7:ATQ0X4\r]
jun 21 22:39:29.38: [ 2029]: --> [2:OK]
jun 21 22:39:29.39: [ 2029]: <-- [7:ATS0=0\r]
jun 21 22:39:29.51: [ 2029]: --> [2:OK]
jun 21 22:39:29.52: [ 2029]: <-- [7:ATS8=2\r]
jun 21 22:39:29.64: [ 2029]: --> [2:OK]
jun 21 22:39:29.65: [ 2029]: <-- [8:ATS7=60\r]
jun 21 22:39:29.77: [ 2029]: --> [2:OK]
jun 21 22:39:29.78: [ 2029]: <-- [12:AT&H1&I0&R2\r]
jun 21 22:39:29.91: [ 2029]: --> [2:OK]
jun 21 22:39:29.92: [ 2029]: <-- [11:ATS13=1&D2\r]
jun 21 22:39:30.05: [ 2029]: --> [2:OK]
jun 21 22:39:30.06: [ 2029]: <-- [6:AT&C1\r]
jun 21 22:39:30.18: [ 2029]: --> [2:OK]
jun 21 22:39:30.19: [ 2029]: <-- [14:AT+FCLASS=2.0\r]
jun 21 22:39:30.32: [ 2029]: --> [2:OK]
jun 21 22:39:30.33: [ 2029]: <-- [9:AT+FLO=2\r]
jun 21 22:39:30.46: [ 2029]: --> [2:OK]
jun 21 22:39:30.47: [ 2029]: <-- [9:AT+FPP=0\r]
jun 21 22:39:30.60: [ 2029]: --> [2:OK]
jun 21 22:39:30.61: [ 2029]: <-- [9:AT+FBO=0\r]
jun 21 22:39:30.74: [ 2029]: --> [2:OK]
jun 21 22:39:30.75: [ 2029]: <-- [10:AT+FCT=30\r]
jun 21 22:39:30.88: [ 2029]: --> [2:OK]
jun 21 22:39:30.89: [ 2029]: <-- [15:AT+FNR=1,1,1,0\r]
jun 21 22:39:31.02: [ 2029]: --> [2:OK]
jun 21 22:39:31.03: [ 2029]: <-- [9:AT+FIE=0\r]
jun 21 22:39:31.16: [ 2029]: --> [2:OK]
jun 21 22:39:31.17: [ 2029]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
jun 21 22:39:31.30: [ 2029]: --> [2:OK]
jun 21 22:39:31.31: [ 2029]: <-- [5:ATM0\r]
jun 21 22:39:31.43: [ 2029]: --> [2:OK]
jun 21 22:39:31.44: [ 2029]: <-- [14:AT+FCLASS=2.0\r]
jun 21 22:39:31.68: [ 2029]: --> [2:OK]
jun 21 22:39:31.68: [ 2029]: <-- [9:AT+FLO=2\r]
jun 21 22:39:31.91: [ 2029]: --> [2:OK]
jun 21 22:39:31.92: [ 2029]: <-- [9:AT+FPP=0\r]
jun 21 22:39:32.15: [ 2029]: --> [2:OK]
jun 21 22:39:32.16: [ 2029]: <-- [9:AT+FBO=0\r]
jun 21 22:39:32.39: [ 2029]: --> [2:OK]
jun 21 22:39:32.40: [ 2029]: <-- [10:AT+FCT=30\r]
jun 21 22:39:32.63: [ 2029]: --> [2:OK]
jun 21 22:39:32.64: [ 2029]: <-- [15:AT+FNR=1,1,1,0\r]
jun 21 22:39:32.87: [ 2029]: --> [2:OK]
jun 21 22:39:32.88: [ 2029]: <-- [9:AT+FIE=0\r]
jun 21 22:39:33.11: [ 2029]: --> [2:OK]
jun 21 22:39:33.12: [ 2029]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
jun 21 22:39:33.35: [ 2029]: --> [2:OK]
jun 21 22:39:33.36: [ 2029]: <-- [26:AT+FLI="Gwenael ROUILLEC"\r]
jun 21 22:39:33.59: [ 2029]: --> [2:OK]
jun 21 22:39:33.61: [ 2029]: DIAL 445454
jun 21 22:39:33.61: [ 2029]: <-- [11:ATDT445454\r]
jun 21 22:39:38.73: [ 2029]: --> [12:NO DIAL TONE]
jun 21 22:39:38.74: [ 2029]: SEND FAILED: JOB 14 DEST 445454 ERR No local dialtone
jun 21 22:39:38.74: [ 2029]: <-- [5:ATH0\r]
jun 21 22:39:38.96: [ 2029]: --> [2:OK]
jun 21 22:39:38.97: [ 2029]: SESSION END

 

 

 

And the modem never come back to the idle position.

 

Is someone can help me please ?

 

Thanks to the persons for this wonderfull software.

 

Gwénaël ROUILLEC