HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Initialyze modem fail after a good send fax or after no dial tone !!!!!



Hi,
 
I have a problem whith my modem (usr 56k message modem AT10=5601).
After to send a fax, or after no local dial tone (i plug off the phone link), the faxstat give me this message :
 
 > Waiting for modem to come ready
 
After few time, i receive this mail :
 
> The HylaFAX software thinks that there is a problem with the modem
> on device /dev/ttyS0 that needs attention; repeated attempts to
> initialize the modem have failed.
> Consult the server trace logs for more information on what is happening
 
The log for the no local dialtone is this one :
 
jun 20 21:33:56.10: [12436]: SESSION BEGIN 00000012 33014545454
jun 20 21:33:56.10: [12436]: HylaFAX (tm) Version 4.1.2
jun 20 21:33:56.10: [12436]: SEND FAX: JOB 10 DEST 4545454 COMMID 00000012 DEVICE '/dev/ttyS0'
jun 20 21:33:56.10: [12436]: DELAY 75 ms
jun 20 21:33:56.18: [12436]: DELAY 2600 ms
jun 20 21:33:58.78: [12436]: <-- [4:ATZ\r]
jun 20 21:33:58.92: [12436]: --> [2:OK]
jun 20 21:33:58.92: [12436]: DELAY 3000 ms
jun 20 21:34:01.92: [12436]: <-- [5:ATE0\r]
jun 20 21:34:02.06: [12436]: --> [2:OK]
jun 20 21:34:02.06: [12436]: <-- [5:ATV1\r]
jun 20 21:34:02.20: [12436]: --> [2:OK]
jun 20 21:34:02.20: [12436]: <-- [7:ATQ0X4\r]
jun 20 21:34:02.34: [12436]: --> [2:OK]
jun 20 21:34:02.34: [12436]: <-- [7:ATS0=0\r]
jun 20 21:34:02.48: [12436]: --> [2:OK]
jun 20 21:34:02.48: [12436]: <-- [7:ATS8=2\r]
jun 20 21:34:02.62: [12436]: --> [2:OK]
jun 20 21:34:02.62: [12436]: <-- [8:ATS7=60\r]
jun 20 21:34:02.76: [12436]: --> [2:OK]
jun 20 21:34:02.76: [12436]: <-- [12:AT&H2&I2&R1\r]
jun 20 21:34:02.90: [12436]: --> [2:OK]
jun 20 21:34:02.90: [12436]: <-- [11:ATS13=1&D2\r]
jun 20 21:34:03.04: [12436]: --> [2:OK]
jun 20 21:34:03.04: [12436]: <-- [6:AT&C1\r]
jun 20 21:34:03.18: [12436]: --> [2:OK]
jun 20 21:34:03.18: [12436]: <-- [12:AT+FCLASS=1\r]
jun 20 21:34:03.32: [12436]: --> [2:OK]
jun 20 21:34:03.32: [12436]: <-- [12:AT+FCLASS=0\r]
jun 20 21:34:03.46: [12436]: --> [2:OK]
jun 20 21:34:03.46: [12436]: <-- [5:ATM0\r]
jun 20 21:34:03.60: [12436]: --> [2:OK]
jun 20 21:34:03.60: [12436]: <-- [12:AT+FCLASS=1\r]
jun 20 21:34:03.84: [12436]: --> [2:OK]
jun 20 21:34:03.84: [12436]: DIAL 4545454
jun 20 21:34:03.84: [12436]: <-- [12:ATDT4545454\r]
jun 20 21:34:12.96: [12436]: --> [12:NO DIAL TONE]
jun 20 21:34:12.96: [12436]: SEND FAILED: JOB 10 DEST 4545454 ERR No local dialtone
jun 20 21:34:12.96: [12436]: <-- [5:ATH0\r]
jun 20 21:34:13.20: [12436]: --> [2:OK]
jun 20 21:34:13.20: [12436]: SESSION END
 
And the modem never come back to the idle position.
 
Is someone can help me please ?
 
Thanks to the persons for this wonderfull software.
 
Gwénaël ROUILLEC
 
 
 
 



Project hosted by iFAX Solutions